Belkin Network USB Hub User manual
Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2007 Belkin International, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed. Windows
and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Mac
OS is a trademark of Apple Inc., registered in the U.S. and
other countries. P75465-A
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
Network
USB Hub
Network
USB Hub
User Manual
F5L009
Network
USB Hub
Network
USB Hub
1. Introduction .....................................................................1
2. Setting Up your Network USB Hub ..................................2
3. Using the Network USB Hub Control Center....................5
4. Appendix – Operation/Compatibility Notes....................17
5. Information....................................................................18
Table of Contents
1
Introduction
1
2
3
4
5
Congratulations and thank you for purchasing the Network
USB Hub (the Hub) from Belkin. By connecting to your network
router, this innovative sharing tool gives you a great way
to enhance its capabilities, as well as those of all the USB
devices connected throughout your network. It lets you access
your USB devices remotely without the hassle of setting up
network software. Now you can easily print to the USB printer
in your home office from your living room or bedroom—through
any wireless router.
1
2
Setting Up your Network USB Hub
1
2
3
4
5
3
The Hub works with Windows®XP and Windows VistaTM
(32- and 64-bit), and Mac OS®X (v10.3~v10.4). In order to
use the Hub, you must have a networking router connecting
your network.
1. Preparing for Setup
NOTE: If you are connected to a network router that uses
Dynamic Host Configuration Protocol (DHCP), which most
networks do, you do not need to set up your Hub.
1.1 Plug the AC adapter into the Hub.
1.2 Check the Power LED (green). It should be illuminated.
1.3 Plug the Ethernet cable into the Hub.
1.4 Plug the other side of the Ethernet cable into your
network router.
2. Installing the Software
IMPORTANT: If you do not install the software on your
computer, the Hub will not work.
2.1 Insert the setup CD into your CD-ROM drive.
You will see the Hub Setup CD icon.
Please open it and click “Setup” icon.
2 3
Setting Up your Network USB Hub
1
2
3
4
5
2.2 You will see the Hub
Setup CD screen.
Click “Install Control
Center”.
2.3 You will see the
“Welcome” screen.
Click “Continue”.
2.4 Select a destination
in which to install the
software and click
“Continue”.
4
Setting Up your Network USB Hub
1
2
3
4
5
5
2.5 Click “Install” to start the
installation.
2.6 If prompted please enter
name and password for
authentication.
2.7 Installation is complete.
Click “Restart”.
Warning: Please update your
firewall and Internet security
software to make sure your
computer works properly
with the Network USB Hub.
4 5
Using the Network USB Hub Control Center
1
2
3
4
5
Once the setup is completed, launch the Belkin Network
USB Hub Control Center through the “Start” menu. The main
Control Center (see image below) gives you a visual depiction
of your connection configuration.
You can connect to a device by Ctrl+Clicking the device on the
list, or by selecting it on the list, and then clicking “Connect”,
on the bottom of the screen. To disconnect a device, just
Ctrl+Click it on the list, or select it and then click “Disconnect”,
on the bottom of the screen.
You can change device names, settings, and more by selecting
the device from the list, and then clicking “Properties”.
6
Using the Network USB Hub Control Center
1
2
3
4
5
7
What the designations mean
Device: Name of the device. You can change the name by
clicking “Properties”.
Status: Status of the device. The status changes automatically.
Type: Category of the device. This is detected automatically.
Automatically connect: This allows the PC to automatically
connect to this device. This can be enabled or disabled
in “Properties”.
Hub ID: The ID of the Hub into which the device is plugged.
This is detected automatically.
Connected to this computer: Devices shown are currently
connected to the computer that you are using.
Not Connected: It is available for you to use. You can
connect to this device by double-clicking the bar or by
clicking “Connect”.
6
7
Using the Network USB Hub Control Center
1
2
3
4
5
Not Connected: The device is being used by someone else
and it is not available. You can make a request for the device
by clicking “Request Use”.
Unavailable: The device has been disconnected from the Hub.
It will be removed from the list when you click “Refresh”.
Other manuals for Network USB Hub
1
This manual suits for next models
1
Table of contents
Other Belkin Switch manuals
Belkin
Belkin BITRONICS P72655 User manual
Belkin
Belkin OMNIVIEW F1DA104PEA User manual
Belkin
Belkin OmniView F1DD102Lea User manual
Belkin
Belkin F1DS102Jea User manual
Belkin
Belkin Secure DVI-I User manual
Belkin
Belkin F1DH104L User manual
Belkin
Belkin WeMo F7C027 User manual
Belkin
Belkin OmniView SOHO F1DD102L User manual
Belkin
Belkin OmniView F1DS102J User manual
Belkin
Belkin OmniView F1DP108G User manual
Belkin
Belkin F1U117 User manual
Belkin
Belkin F1DE101H User manual
Belkin
Belkin Bitronics AutoSwitch Kit User manual
Belkin
Belkin F1U109 User manual
Belkin
Belkin F1DG102P - Flip PS/2 With Audio KVM User manual
Belkin
Belkin F1DN002MOD-KM-4 User manual
Belkin
Belkin F1DA104Zea, F1DA108Zea, F1DA116Zea Installation and operation manual
Belkin
Belkin Secure KVM - NIAP PP4.0 Service manual
Belkin
Belkin OmniView F1DW116C User manual
Belkin
Belkin Switch2 DVI-D User manual
