Beko DSN53100X User manual

Read “Safety Instructions” section first!

Quick Guide

Operating the product

10-

Rinse Aid indicator

Salt indicator

On/Off Control light

Handle

On/Off/Programme Selection key

Start/Pause/Cancel key

Programme Follow-up lights

Time Delay key

Time Delay indicator

Half Load function

1 2 3

78910

12345

Eco *** Intensive Clean&Shine Quick&Shine Mini

50 ºC 70 ºC 65 ºC 60 ºC 35 ºC

Suitable for washing

dishes with normal

amount of soil. It is

the most efficient

program in terms of

combined power and

water consumption.

This is used for

assessing the

compliance with EU's

eco-design directive.

Suitable for heavily

soiled dishes, pots

and pans.

Daily washing

programme for

normally soiled

dishes.

Daily washing

programme for

normally soiled

dishes in the fastest

way.

Suitable for lightly

soiled daily dishes

that are scraped or

pre-cleaned.

Medium High Medium Medium Low

+++ - -

+++++

++++ -

210 120 120 58 30

11,5 17,6 16,2 11,8 11,8

1,03* / 1,037** 1,65 1,38 1,20 0,80

Loading Capacity: 13

Programme Data and Average Consumption Values Table

* : EN 60436:2016 ** : EN 60436:2020 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.

*** Reference programme for testing institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and

using the test programme. The values given for programmes other than Eco 50°C programme are indicative only.

Programme number

Programme name

Cleaning temperature

Degree of Soiling

Energy (kWh)

Prewash

Wash

Dry

Duration (min)

Water (I)

Sensitivity: Public

Programme Table

Quick Guide

Adjusting the water softening system

•Unpack the test strip.

•Open the tap and let the water flow for approx. 1

minute.

•Dip in the test strip into the water for 1 second.

•Take out the strip from the water and shake it.

•Wait for 1 minute.

•Make the necessary adjustment according to the test

strip.

Level 0

Level 1

Level 2

Level 3

Level 4

Level 5

After detecting the water hardness:

1. When the Programme Selection knob is in Off position, press and hold the Start/Pause/

Cancel key and turn the Programme Selection knob clockwise by one level within 5

seconds. Once this time has elapsed, the product will enter the regeneration setting mode.

2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator

adjustment mode is activated.

3.To adjust the new Water Hardness Level, move the Programme Selection knob to the

position that is suitable for your supply water. (see, Water Hardness Level Adjustment

Table)

**Programme Selection knob rotates in 5 steps regardless of the number of the

programmes contained on the machine.

4. Press “Start/Pause/Cancel” key for once to store the level you have selected.

Washing, rinsing and drying performance of your dishwasher will improve when the water

softening system is adjusted correctly.

To adjust the system, first learn the water hardness in your region and adjust as indicated

below.

Quick Guide

Adjusting the water softening system

Quick Guide

1876720100-AA_BEKO_A5_EN/06-05-20.(17:23)

Water hardness level adjustment table

Hardness

Level

English Water

Hardness °dE

German Water

Hardness °dH

French* Water

Hardness °dF

Position of

programme

selection

knob*

Water Hardness Level Indicator

Level 0 0-5 0-4 0-8 1 Washing lamp on the panel will

illuminate.

Level 1 6-9 5-7 9-13 1

Level 2 10-15 8-12 14-22 2 Drying lamp on the panel will

illuminate.

Level 3 16-19 13-15 23-27 3 End lamp on the panel will illuminate.

Level 4 20-24 16-19 28-34 4 Washing, Drying and End lamps on

the panel will illuminate.

Level 5

25-62 20-50 35-90 5

Washing, Drying and End lamps

on the panel will ash at 1-second

intervals.

•If the hardness level of the water that you use is above 50°dH or if you are using well

water, than it is recommended to use filter and water purification devices.

•If the hardness level of the water that you use is below 7°dH, there is no need to use

salt in your dishwasher. In this case, the Salt Indicator light on the control panel of your

dishwasher will light continuously.

•If the water hardness is set to level 1, the Salt Indicator will light continuously although

it is not necessary to use salt. If you use salt under this condition, salt will not be

consumed and the lamp will not illuminate.

When moving, you will need to set the water hardness level of your dishwasher again

according to the information above, depending on the water hardness of the place you

have moved to. If the water hardness level of your machine is adjusted previously, your

machine will display the most recent hardness level adjustment.

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Samsung

Samsung WF16J9800K Series user manual