BeeWi BBS010 User manual
Thank you for purchasing the BBS010 Slim Hands-Free Speaker
from BEEWI Please read the following instructions to learn how
to configure and use more effectively your product
The BBS010 Slim Speaker is a high performance full duplex hands-free solution specially
designed for users to enjoy the convenience and freedom of wireless hands-free communication in the
car, ut also at home or in the office. It includes advanced uilt-in microphone and 1W speaker with
Digital Sound Processor (DSP) for echo cancellation and noise reduction that gives a loud and clear
full duplex sound quality.
The BBS010 Slim Speaker is a Bluetooth 2.1+EDR wireless speaker compati le with all Bluetooth
compliant devices using HFP profiles such as mo ile phones.
Warning: always o ey local legislation regarding the use of mo ile phones in the car.
1 Product Description
1.1. Packaging content
- Bluetooth Speaker
- USB ca le
- 12-24V Car Adapter with USB port
- Car visor clip
- User Manual CD
1.2. Features
- Full Duplex, ackground noise reduction with CVC Digital Signal Processor ( DSP)
- Multipoint Technology to connect 2 mo ile phones simultaneously
- Extra slim size and light weight
- No installation required
- Up to 1000 hours stand y time and 5 hours continuous talk time under normal usage.
1.3. Product overview
- (1) Speaker
- (2) Microphone
- (3) LED
- (4) Charging Socket (Micro-USB)
- (5) MFB (Multi-Function Button)
- (6) Volume Up (V+) & Down (V-)
1.4. Product Specification
Bluetooth Specification Bluetooth V2.1+EDR
Bluetooth Profiles HSP - HFP1.5
Frequency Band 2.4GHz~2.48 GHz ISM Band
Power class & range Class 2, Up to 10 meters
Num er of Paired Devices Up to 8 devices
Max Audio Output Power 1 W
Stand y Time Up to 1000 hours (40 days)
Talking Time Up to 5 hours
Battery 340mAH Li-Polymer rechargea le attery
Battery Charging Time Up to 2 hours
Dimensions 100L x 48W x 8D mm
Weight 42 g
2 Using the product
2.1. Car Installation
Insert the metal clip on the ack of the speaker and clip it on driver’s car visor. Make sure the speaker
is firmly attached with the microphone pointing towards the driver.
2.2. Charging
Prior to using the speaker the first time, it is recommended to fully charge the attery. Normal full
charge time is approximately 2 hours. The red LED will stay on while charging and will e off as soon
as it is completed.
IMPORTANT:
- Charging indication will e delayed y a few minutes if the speaker has not een used for a long time
or the attery is drained.
- To prolong attery life, it is recommended to charge the speaker as soon as the low attery indicator
is shown.
2.3. Power On / Power Off
Power On: press and hold the MFB utton for 3 seconds until you hear a short eep. The flashing lue
LED light indicator comes on, and the speakerphone automatically connects to the mo ile phone it has
een paired with already.
Power Off: press and hold the MFB utton for 3 seconds until you hear a short eep. The flashing red
LED light indication goes off.
2.4. Pair and connect
Refer to the Bluetooth pairing procedures in the mo ile phone user manual.
When the speaker is off, long press the MFB utton for a out 5 seconds until the light indicator flashes
red and lue alternatively, then release the utton. The alternated flashes indicate that the speaker is in
pairing mode.
Search for Bluetooth devices in the phone, select “BeeWi BBS010” on display and enter the pass key
“0000” to add the speaker to the pair list. When pairing is complete, the lue and red LED light will
stop flashing, and the speaker will automatically connect to the phone and go in stand y mode with the
lue light flashing every 3 seconds.
Check the connection y placing a call from your phone.
Note: If the pairing cannot e completed within 2 minutes after the pairing mode is activated, the
speaker will power OFF automatically. Repeat the steps a ove to pair the speaker and mo ile phone
again.
2.5. Status indicators
Status LED Descriptions
Power On Blue 3 seconds flash
Power Off Red 3 seconds flash, then Off
Pairing Blue/Red Alternated linking
Stand y Mode (Connected) Blue Blinking every 3 seconds
Stand y Mode (Disconnected) Blue Blinking twice every 3 seconds
During Communication Blue Blinking every 6 seconds
Low Battery Red Blinking every 3 seconds
Charging Red Light on
Charging Completed Red Light off
2.6. Connection
The speaker automatically connects to the last connected device when it is turned on. If the device is
not found, the speaker will connect to a previous device in the paired list.
In case the connection is not made automatically, it is possi le to reconnect manually either from the
speaker y pressing the MFB or from the mo ile device (refer to the phone user manual). It is also
possi le to disconnect the speaker either manually or y moving out of range. When losing the
connection/link, the speaker will automatically power off after 15 minutes.
2.7. Multipoint
The Multipoint function allows a simultaneous connection to 2 mo ile phones. In default setting of the
speaker’s Multipoint function is disa led.
- To ena le Multipoint function: in stand y mode, press and hold “V+” utton for 3 seconds until a
eep is heard. If 2 mo ile phones are already paired to the speaker, they will connect automatically
when powering on the speaker.
- To disa le Multipoint function: in stand y mode, press and hold “V-” utton for 3 seconds until a
eep is heard. The speaker will turn off multipoint function and power off automatically. When
powering on again, the speaker will only connect to the last connected Bluetooth device.
2.8. Function Matrix
Feature Key Conditions Operation
Power On Powered off Long press 3 seconds
Power Off Powered on Long press 3 seconds
Pairing Powered off Long press 6 seconds
Answer a call Incoming Call Short press
Hang up a call Talking Short press
Reject incoming call Incoming Call Long press 3 seconds
Voice dial/Cancel Voice Dial Stand y Mode Short press
Last num er redial Stand y Mode Short press twice
Switch active calls* 2 Calls in process Short press twice
Hang up call 1 and answer call 2* 2 Calls in process Short press
Reject call 2* 2 Calls in process Long press 3 seconds
Switch audio to/from phone + & - In call Simultaneous press
Mute microphone - In call Long press 3 seconds
Un-mute microphone + Long press 3 seconds
Volume up + In call Short press
Volume down - In call Short press
* 3-way calling not supported if Multipoint function ena led
2.9. Restore to Default Setting
To reset the speaker to the original settings and remove all the previous pairing and connections, just
press and hold oth “V+” and “V-” uttons simultaneously for 10 seconds until the lue and red LED
lights flash 5 times.
Contacts:
JSC „Ainera“
Tel: +370 37 209747
E-mail: pagal [email protected]
www.ainera.lt
Other manuals for BBS010
1
Other BeeWi Automobile Accessories manuals
