basIP AA-07FB User manual
USER MANUAL
ENTRANCE PANEL
AA-07FB
Stainless Steel
AA-07FB
The multi-apartment entrance panel AA-07FB Stainless is an excellent solution for
The front part of the panel is made of stainless steel (AISI 304) 3 mm thick, which makes
this panel even more vandal resistant.
The AA-07FB Stainless also has a backlit TFT color screen, a high-resolution IP camera
with wide viewing angles, and supports BAS-IP UKEY mobile access.
multi-apartment complexes, office buildings, and cottage settlements.
Full User Manual
Device description
wiki.bas-ip.com
ENTRANCE PANEL
Appearance
123
456
7 8 9
0
*#T
Proximity sensors.
Keypad.
Reader.
Backlight.
Loudspeaker.
Camera.
4.3’’ Display.
1
2
3
4
5
6
7
-
-
-
-
-
-
-
1
3
2
4
6
7
5
Main features
• Display: 4.3’’ TFT, color with backlight.
• Camera: 1/3”.
• Resolution: 2 Мp.
• Сamera angle: 110° (horizontal).
• Output video: Full HD (1920 × 1080), H.264 Main Profile.
• Night backlight: 6 LEDs.
• Light sensitivity: 0,01 LuX.
• Protection class: IP65.
• IK-Code: IK08.
• Output for connecting an external induction loop for
the hearing impaired: Low-frequency Audio signal 1.2V; 8.2 kOhm
• Type of output for connecting an external induction loop:
Socket (female) TRS
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 3,6 W.
• Power supply: +12 V DC.
• Body: Aluminum.
• Dimensions for installation: 141 × 351 × 60 mm.
• Size of the panel: 155 × 375 × 55 mm.
• Installation: Flush, surface with BR-AA7 bracket.
Completeness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
Outdoor panel
Manual
Flush mount bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of cups
Set of screws with a wrench
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a PoE network switch
or regular switch/router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps.
Wires must be connected to connect the door sensor, the exit button
and the two locks control module (optional).
EAN: 5060514914519 (STAINLESS)
Connection scheme of electromagnetic lock using
uninterruptible power supply UPS-DP/S
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
Electromagnetic Lock
SH-45
Door Sensor
SH-42
(optional)
Exit Button
GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
Connection scheme of electromechanical lock using
uninterruptible power supply UPS-DP/S
Connection scheme of electromechanical lock using
third party power supply for the lock
Electromechanical lock
Electromechanical lock
+12V
DC
-+
Mechanical mounting
Before installation of the outdoor panel it is necessary to provide a hole
or a recess into a wall with dimensions 143×353x61 mm (for flush mount)
dimensions of the bracket (mounting box) = 141×351×60 mm.
and the local network.
at the bottom of the niche which will serve to divert water out.
Attention: the hole at the bottom is designed to drain the water.
Do not intentionally close it. Also it is necessary to make a drain for water
It is also necessary to provide supply of a power cable, additional modules
141 mm
351 mm
239 mm
Outdoor Panel Flush Bracket
Niche ScrewsOutdoorPanel
143 mm
353 mm
109-130 cm
155 mm
375 mm
55 mm
123
456
7 8 9
0
*#T
123
456
789
0
*#T
Flush Bracket
EAN: 5060514914519 (STAINLESS)
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.
Notes
EAN: 5060514914519 (STAINLESS)
www.bas-ip.com
Table of contents
Other basIP Intercom System manuals
basIP
basIP AZ-07L User manual
basIP
basIP AA-12 Series User manual
basIP
basIP AV-01BD User manual
basIP
basIP AT-10 User manual
basIP
basIP AA-07BD User manual
basIP
basIP SH-47T User manual
basIP
basIP AV-03D User manual
basIP
basIP AA-07FBC User manual
basIP
basIP AQ-07LL User manual
basIP
basIP AV-08FB User manual
basIP
basIP AV-01KD User manual
basIP
basIP AQ-07LW User manual
basIP
basIP AA-07FB User manual
basIP
basIP AT-07L User manual
basIP
basIP AZ-07LL User manual
basIP
basIP AA-07FB User manual
basIP
basIP AV-01 Instruction sheet
basIP
basIP BI-02FB User manual
basIP
basIP BI-02B User manual
basIP
basIP AU-04LA User manual
