baracuda xa2030 Manual
Installation & Operating Instructions
630-9498-BAR-MAN-XA
2Baracuda XA Robotic Pool Cleaner | Installation & Operating Instructions
Thank you for choosing a Baracuda product.
This product has been manufactured using modern production methods
and extensive quality assurance procedures, because our goal is to ensure
that you, the customer, are satisfied with our products.
Fluidra is continually striving to further develop and improve its range of
products; we therefore reserve the right to make alterations to the form,
technical specifications and equipment level of our standard equipment.
The information in this manual is therefore subject to change.
DECLARATION OF CONFORMITY
This product range conforms to the relevant Compulsory Specifications.
An electronic
version of this manual
may be found on
www.baracuda.co.za
Installation & Operating Instructions | Baracuda XA Robotic Pool Cleaner 3
Warning: It is vital that you read this installation and user
manual, as well as the “Warranties” booklet delivered with
the appliance, before you use or handle the appliance.
Failure to do so may result in material damage or serious or
fatal injury and will void the warranty.
Keep and pass on these documents for reference during the
appliance’s service life.
IMPORTANT SAFETY INSTRUCTIONS
• The distribution or modification of this document in any way is
prohibited, without prior authorisation from Baracuda®.
• Baracuda® is constantly developing its products to improve their
quality. The information contained herein may therefore be modified
without notice.
• Failure to respect the warnings may cause serious damage to the pool
equipment or cause serious injury, even death.
• Only a person qualified in the technical fields concerned (electricity,
hydraulics, or refrigeration) is authorised to carry out maintenance or
repair work on the appliance.
• The qualified technician working on the appliance must use/wear
personal protective equipment (such as safety goggles and protective
gloves, etc.) to reduce the risk of injury occurring when working on the
appliance.
• Before handling the appliance, check that it is switched o and isolated.
• The appliance is intended to be used for pools and spas for a specific
purpose; it must not be used for any purpose other than that for which
it was designed.
• This appliance is not intended for use by individuals (including children)
with impaired physical, sensorial, or mental abilities, or persons lacking
in knowledge and experience, unless they receive supervision or prior
instructions on using the appliance from a person responsible for their
safety. Children must be supervised to ensure that they do not play
with the appliance.
4Baracuda XA Robotic Pool Cleaner | Installation & Operating Instructions
• This appliance can be used by children under 8 and adults with
impaired physical, sensory, or mental capabilities, or who lack
experience and knowledge, if they are correctly supervised or have
been instructed in how to use the appliance safely and understand
the hazards involved.
• User cleaning and maintenance operations must not be carried out
by children without supervision.
• The appliance must be installed according to the manufacturer’s
instructions and in compliance with local and national standards.
• The installer is responsible for installing the appliance and for
compliance with national installation regulations.
• Under no circumstances may the manufacturer be held liable in the
event of failure to comply with applicable local installation standards.
• For any work other than the simple user maintenance described in this
manual, the product should be referred to a qualified professional.
• If the appliance suers a malfunction, do not try to repair it yourself;
instead contact a qualified technician.
• Refer to the warranty conditions for details of the permitted water
balance values for operating the appliance.
• Deactivating, eliminating, or by-passing any of the safety mechanisms
integrated into the appliance shall automatically void the warranty,
in addition to the use of spare parts manufactured by unauthorised
third-party manufacturers.
• Do not spray insecticide or any other chemical (flammable or
non-flammable) in the direction of the appliance, as this may damage
the body and cause a fire.
• Do not touch the fan or moving parts and do not place objects or
your fingers in the vicinity of the moving parts when the appliance is
in operation.
• Moving parts can cause serious injury or even death.
Installation & Operating Instructions | Baracuda XA Robotic Pool Cleaner 5
• The power supply to the appliance must be protected by a dedicated
30 mA Residual Current Device (RCD), complying with the standards
and regulations in force in the country in which it is installed.
• Do not use any extension lead when connecting the appliance; connect
the appliance directly to a suitable power supply.
• Before carrying out any operations, check that:
• The required input voltage indicated on the appliance information
plate corresponds to the mains voltage.
• The mains supply is compatible with the appliance's electricity
needs and is correctly grounded.
• In the event of abnormal operation or the release of odours from the
appliance, turn it o immediately, unplug it from its power supply and
contact a professional.
• Before servicing or performing maintenance on the appliance, check
that it is powered o and completely disconnected from the power
supply and that all other equipment or accessories connected to the
appliance are also disconnected from the power circuit.
• Do not disconnect and reconnect the appliance to the power supply
when in operation.
• Do not pull on the power cord to disconnect it from the power supply.
• If the power cord is damaged, it must be replaced by the manufacturer,
an authorised representative, or a repair facility only.
• Do not perform maintenance or servicing operations on the appliance
with wet hands or if the appliance is wet.
• Before connecting the appliance to the power supply, check that the
connection unit or socket to which the appliance will be connected is in
good condition and shows no signs of damage or rust.
• In stormy weather, disconnect the appliance from the power supply to
prevent it from suering lightning damage.
WARNINGS ASSOCIATED WITH
ELECTRICAL APPLIANCES
6Baracuda XA Robotic Pool Cleaner | Installation & Operating Instructions
SPECIFIC FEATURES
APPLICABLE TO POOL CLEANERS
• The cleaner is designed to operate properly in pool water at a
temperature of between 10°C and 35°C.
• To avoid possible injury or damage to the cleaner, do not operate the
cleaner out of the water.
• In order to prevent possible injury, bathing is prohibited when your
cleaner is in the pool.
• Do not use the cleaner during shock chlorination.
• Do not leave the cleaner unattended for an extended period.
WARNING ON THE USE OF A CLEANER
IN A POOL WITH A LINER
• Before installing the cleaner, carefully inspect the pool lining.
If the liner comes away or is damaged in places, or if stones, folds,
roots, or corrosion appear, do not install the cleaner before a qualified
professional repairs or replaces the liner. The manufacturer may not be
held liable in any way for damage caused to the liner.
• The surface of certain patterned liners can wear away quickly: the
patterns and/ or colours can become deteriorated, faded, or disappear
on contact with certain objects (cleaning brushes, toys, rubber rings
and floats, chlorine dispensers, or cleaners). The cleaner manufacturer
may not be held liable for wear to the liners or faded patterns, which
are not covered by the limited warranty.
Installation & Operating Instructions | Baracuda XA Robotic Pool Cleaner 7
INFORMATION BEFORE USING
THE BARACUDA ROBOTIC POOL CLEANER
XA2030 XA4030iQ
CLEANER + CABLE
CONTROL UNIT
BASE -
TROLLEY KIT -
SINGLE FILTRATION (100) -
DUAL FILTRATION (150/60) -
PROTECTIVE COVER OPTIONAL EXTRA OPTIONAL EXTRA
8Baracuda XA Robotic Pool Cleaner | Installation & Operating Instructions
XA2030 XA4030iQ
SURFACE TYPE All surface types
POOL SHAPE All shapes (rectangular, oval, free-form)
POOL DIMENSIONS 10m x 5m 12m x 6m
FRONT BRUSH
REAR BRUSH -
NUMBER OF CYCLES 2 2
FLOOR ONLY CYCLE
FLOOR + WALLS + WATERLINE CYCLE
CYCLONIC SUCTION
CONTROL USING THE iAqualink App -
CONTROL UNIT POWER SUPPLY (VOLTAGE) 220-240 VAC, 50/60Hz, Class II*
CLEANER POWER SUPPLY (VOLTAGE) 30VDC
MAXIMUM POWER INPUT 150W
CABLE LENGTH 15m 18m
FILTER CAPACITY 4L
CLEANER SIZE (LxWxH) 410x560x380
PACKAGE SIZE (LxWxH) (mm) 560x560x380 560x560x460
CLEANER WEIGHT (WITHOUT CABLE) 8kg
PACKAGED WEIGHT 14kg 18kg
SUCTION WIDTH 270mm
MAXIMUM OPERATING DEPTH 4m
PROTECTION INDEX POWER SUPPLY IPX5
PROTECTION INDEX CLEANER IPX8
FREQUENCY BANDS 2.400GHz - 2.497GHz
RADIO FREQUENCY (RF) EMISSION POWER +19.5dBm
* Class II: appliance with double insulation or reinforced insulation that does not require grounding.
TECHNICAL SPECIFICATIONS
Installation & Operating Instructions | Baracuda XA Robotic Pool Cleaner 9
OPERATING PRINCIPLE
• The cleaner is independent of the filtration system and can therefore
operate autonomously. It just simply needs to be connected to the
mains power supply.
• It finds the best route to move around and clean the areas of the pool
for which it has been designed (depending on the model: floor, walls,
water line or floor only). Debris is sucked in and stored in the cleaner's
filter. The cleaner can be used:
• via the control box supplied with the cleaner,
• or via a smartphone or a tablet compatible with the iAquaLink™
application (see " 3Using the iAquaLink™ app (for iQ models)").
3.5m minimum
Control Unit
Trolley (only XA4030iQ)
Cleaner
Floating Cable
Plug
Power Cord
iAquaLink™ Remote Control (only XA4030iQ)
10 Baracuda XA Robotic Pool Cleaner | Installation & Operating Instructions
POOL PREPARATION
This product is intended to be used in pools which are
permanently installed. Do not use it in pools which may be
dismantled. A permanent pool is built into the ground or on
the ground and cannot be easily dismantled and stored.
The appliance must operate in pool water with the following properties:
Water temperature Between 10°C and 35°C
pH Between 6.8 and 7.6
Free chlorine < 3 mg/ l
• When the pool is dirty, especially when commissioning,
remove the largest debris using a net in order to optimise the
appliance's performances.
• Remove any thermometers, toys and other objects that might
damage the appliance.
This manual suits for next models
1
Table of contents
Other baracuda Swimming Pool Vacuum manuals
baracuda
baracuda Captura EM14 Series User manual
baracuda
baracuda tracker User manual
baracuda
baracuda GC User manual
baracuda
baracuda S3 Robotic User manual
baracuda
baracuda gotcha EP34 Series User manual
baracuda
baracuda Ranger User manual
baracuda
baracuda Ranger User manual
baracuda
baracuda Captura Plus User manual
baracuda
baracuda G3 User manual
baracuda
baracuda b3 User manual
