bar BAR4013C-HJ User manual
2
Introduction
Using the Operators Manual ............................................
ressure Cleaner...............................................................
Engine................................................................................
afety
Safety Rules.......................................................................
Cooling Information............................................................
Hazard Symbols and Meanings.........................................
ee Ceane Coonent
Component Charts (Various Models)..................................
Assemly
Unpack the ressure Washer ...........................................
Attach Handle ....................................................................
PreOperation Checlist
Check Oils, Fuel, Water ....................................................
Connect Hose and Water Supply to ump .......................
tarting our Ceane
How to Start your ressure Cleaner..................................
hutting on our Ceane
How to Shut Down your ressure Cleaner.......................
Eectc Stat Oton
Component Chart ............................................................
4
5
5
6
7
8
14
17
17
18
18
19
23
24
TAE O CONTENT
3
25
25
25
26
27
28
29
29
29
30
30
44
pray Tips
How to Use Spray Tips ........................................................
Change Spray Tips ..............................................................
Usage Tips ..........................................................................
sing Te lac oap Nole
Applying Detergent ...............................................................
Trouleshooting
etrol Engine Trouble Shooting Chart .................................
ump Trouble Shooting Chart ..............................................
torage
Winter Storage .....................................................................
Long Term Storage ..............................................................
rotect Fuel System ............................................................
Storing the Engine ...............................................................
Other Storage Tips ..............................................................
Te An Conton
Terms and Conditions ..........................................................
TAE O CONTENTS
46
Notes
Maintenance Notes ...............................................................
32
at t
Maor Components N: .......................................................
Warranty Statement ............................................................. 45
4
Attention: Read through the complete
manual prior to the initial use of your
pressure washer.
NTOCTION
sing the Operators manual
The operating manual is an important part of your pressure washer. It should
be read thoroughly before initial use, and referred to often to make sure
adequate safety and service concerns are being addressed.
Reading the owners manual thoroughly will help avoid any personal inury or
damage to your machine. By knowing how best to operate this machine, you
will be better positioned to show others who may also operate the unit.
This manual was written to take you from the safety requirements to the
operating functions of your machine. ou can refer back to the manual at any
machine at all times.
5
OCT IENTIICATION
IIf you need to contact an Authorized Dealer or Customer Service line
for information on servicing, always provide the product
ou will need to locate the model and serial number for the machine
and record the information in the places provided below.
ate of Purchase:
ealer Name
ealer Phone
Model Numer:
erial Numer:
urication hart
Pump
Engine:
Gearo
niversal Tractor Transmission Oil
AE 1030
AE 90
6
mportant arnings
Failure to observe warnings will void warranty andor cause inury.
1. Do not let the pressure washer overheat. Ecess heat will cause severe dam-
age (see below for details).
2. Never run the unit without water. Running the pump dry will cause it to quickly
fail (NOT COVERED B WARRANT).
3. Do not let the unit freeze. Frozen water in the pump will cause serious damage.
4. Always wear eye protection when operating the unit.
5. High pressure spray can cause serious bodily inury of damage soft material.
Use with caution.
6. Never adust unloader to eceed the preset pressure. remature wear, equip-
ment failure, or inury may occur.
IMOTANT SAET INSTCTIONS
SAE TESE INSTCTIONS
WARNING - When using this product, the following precautions should
always be observed and adhered to.
1. Read all instructions before using the product.
2. To reduce the risk of inury, close supervision is necessary when a product is
used near children.
3. now how to stop the product and bleed pressures quickly. Be thoroughly
familiar with the controls. See page 23.
4. Stay alert - watch what you are doing.
5.
drugs.
6. eep operating area clear of other people.
7. Do not overreach or stand on unstable support. eep
solid footing and balance at all times.
8. .
SAET
7
SAET - OONG NORATON
Motors are air cooled. It is important to ensure that machine is operated in a well-
ventilated area where it can draw a steady supply of fresh air. The arrows below show
an eample of locations for air intake on an engine.
Most pumps are protected by a thermal ale. The thermal valve releases water if a
pump starts to run too hot. It will prevent catastrophic heat failure. However, the pump
may have suffered damage and need maintenance, repair, or replacement. If it does
not reset and continues to leak water, the thermal valve may need to be replaced.
THREADEDINTOPUMPWITHTEFLONTAPELEAKSWATERTOPREVENTOVERHEATINGRECT RVEGEARB RVEThermal valve ae ate cooe When the machine is running, ensure the trigger of the gun is pressed
to allow a constant flow of fresh water into and out of the pump. o not et te acne n o
oe tan econ tot en on on te te
8
The safety alert symbol ( ) is used with a signal word (DANGER,
CAUTION, WARNING), a pictorial andor a safety message to alert you
to hazards.
ANE indicates a hazard which, if not avoided, will result in death or
serious inury.
ANIN indicates a hazard which, if not avoided, could result in death or
serious inury.
CATION indicates a hazard which, if not avoided, might result in minor or
moderate inury.
NOTICE indicates a situation that could result in equipment or property damage.
aard yols and Meanings
SAVE THESE INSTRUCTIONS
afety Rules
This is the safety alert symbol. It is used to alert
you to potential personal inury hazards. Obey all
safety messages that follow this symbol to avoid
possible inury or death.
EXPLOSIONKICKBACKFALLFLUIDINJECTIONMOVINGPARTSREADMANUALHOTSURFACEFLYINGOBJECTSSLIPPERYFIREELECTRICSHOCKTOXICFUMESSAET
9
ANIN
eplosive.
Fire or eplosion can cause severe burns or death.
hen Adding or raining uel
hen tarting Euipment
hen Transporting or Repairing Euipment
•Transportrepair with fuel tank EMT or with fuel shutoff valve OFF.
•Disconnect spark plug wire.
hen toring uel or Euipment ith uel in Tan
•Store away from furnaces, stoves, water heaters, clothes dryers, or other
appliances that have pilot light or other ignition source because they can
ignite fuel vapors.
SAET
This product can epose you to chemicals
including lead, which is known to cause
cancer and birth defects or other reproductive
harm. Wash hands after handling.
•Turn pressure cleaner OFF and let it cool at least 2 minutes before removing
fuel cap. Loosen cap slowly to relieve pressure in tank.
•Fill or drain fuel tank outdoors and in accordance with the LOCAL
GOVERNMENT GUIDELINES.
•DO NOT overfill tank. Always allow space for fuel epansion.
•If fuel spills, wait until it evaporates before starting engine.
•eep fuel away from sparks, open flames, pilot lights, heat, and other ignition
sources.
•DO NOT light a cigarette or smoke.
•Ensure spark plug, muffler, fuel cap, and air cleaner are in place.
•DO NOT crank engine with spark plug removed.
hen Operating Euipment
•DO NOT tip engine or equipment at angle which causes fuel to spill.
•DO NOT spray flammable liquids.
10
ANING
Starter cord kickback (rapid retraction) can result in bodily inury.
ickback will pull hand and arm toward engine faster than you can
let go.
Broken bones, fractures, bruises, or sprains could result.
•
•When starting engine, pull cord slowly until resistance is felt and then pull
rapidly to avoid kickback.
•After each starting attempt, where engine fails to run, always point spray gun
in safe direction and squeeze spray gun trigger to release pressure.
•Firmly grasp spray gun with both hands when using high pressure spray to
avoid inury when spray gun kicks back.
ANIN
A running engine gives off carbon monoide, an odorless, colorless,
poison gas.
Breathing carbon monoide can cause headache, fatigue, dizzi-
ness, vomiting, confusion, seizures, nausea, fainting or death.
Some chemicals or detergents may be harmful if inhaled or ingest-
ed, causing severe nausea, fainting, or poisoning.
•Operate pressure cleaner ONL outdoors.
•
-
tion intakes, or other openings.
•DO NOT start or run engine indoors or in an enclosed area, even if windows and
are open.
•Use a respirator or mask whenever there is a chance that vapors may be inhaled.
•Read all instructions with mask so you are certain the mask will provide the neces-
sary protection against harmful vapors.
SAET
ANIN
Risk of electrocution.
Contact with power source can cause electric shock
or burn.
•NEVER spray near a power source.
Other manuals for BAR4013C-HJ
1
This manual suits for next models
5
Table of contents
Other bar Pressure Washer manuals
