
EN 8
C - CONFIGURATION
1 - QUICK START-UP
These steps must be followed in the order described.
Insert 2 x AA LR06 batteries (not supplied) into the
station 30. Then insert the 2 x AAA LR03 batteries
(not supplied) into the outdoor sensor, ensuring that
the polarity is respected 32.
Information: the use of batteries and the mains
transformer for the station is preferable: in the
event of a power failure or if the mains transformer
is unplugged, the weather station will maintain its
conguration.
PAIRING THE SENSOR TO THE STATION
Pairing is automatic once the batteries are inserted.
To force pairing, if required:
- On the station, press and hold the
DOWN button for 5 seconds. The indicator (4)
starts to ash
- On the outdoor sensor, remove then reinsert the
batteries whilst standing close to the weather
station.
TIME AND DATE SETTING
- Press and hold the SET button for 3 seconds.
24h or 12h ashes, Set the time display format
using the UP and DOWN buttons
- Press the SET button to conrm. The two digits:
00 ash. Set the time zone using the UP and
DOWN buttons
- Press the SET button to conrm, then set the
hours using the UP and DOWN buttons.
- Press the SET button to conrm, then set the
minutes using the UP and DOWN buttons.
- Press the SET button to conrm. The letters M
and D ash at the bottom right of the display,
Set the display order using the UP and DOWN
buttons (month / day or day / month)
- Press the SET button to conrm and set the year
using the DOWN and UP buttons.
- Press the SET button to conrm. The number to
the left of M ashes at the bottom right of the
display, Set the month using the UP and DOWN
buttons
- Press the SET button to conrm. The number
to the left of D ashes at the bottom right of the
display, Set the Day using the UP and DOWN
buttons
- Press the SET button to conrm. The two letters
(27) ash. Set the calendar language using the
UP and DOWN buttons (Ge = German / EN =
English / FR = French / IT = Italian / Sp = Spanish
/ DU = Netherlands / DA = Danish)
- Press the SET button for a last time to conrm the
settings.
Information: Pressing briey on the SET button
enables you to scroll through 3 display options. Date
display, seconds display and alarm time display.
ALARM SETTING
- Press and hold the ALARM button for 3 seconds:
The hour of the alarm ashes
Set the hour of the alarm using the UP and
DOWN buttons
- Press the ALARM button to conrm. The minutes
ash; set the alarm minutes using the UP and
DOWN buttons
- Complete the setting by pressing briey on the
ALARM button
When the alarm clock rings, you can press the
SNOOZE/LIGHT button to pause the alarm and
delay the ring for 5 minutes.
When the alarm clock rings, you can stop the ring
by pressing the ALARM button.
- To set the alarm, press the ALARM button once.
A bell (19) appears between the hour and the
minutes.
- To deactivate the alarm, press the ALARM button
once. The bell (19) disappears.
Information: The ring lasts for approximately 1
minute.
AUTOMATIC TIME SETTING
To launch the automatic time setting for the station,
press the UP button once. The LED (10) ashes
(the backlight is switched o temporarily). The
station switches to radio reception (for 7 minutes)
and attempts to pick up the DCF77 time signal to
automatically update the time and date.
Information: the time zone must be set correctly for
a correct display. If reception is insucient, bring the
station near to a window.
Ensure that you leave a gap of 2.5 m between the
station and any source of interference (television,
WiFi, microwave, etc.)
COLOUR WIRELESS WEATHER STATION