Avery Dennison FRESHMARX 9415 User manual
Operator's
Handbook
®
FRESHMARX
9415™
Labeling System
©2007 Avery Dennison Corp. All rights reserved.
28028 28028
0 0
TC9415OH Rev. AG 1/10
R
Each product and program carries a respective written
warranty, the only warranty on which the customer can
rely. Avery Dennison reserves the right to make changes in
the product, the programs, and their availability at any time
and without notice. Although Avery Dennison has made
every effort to provide complete and accurate information
in this manual, Avery Dennison shall not be liable for any
omissions or inaccuracies. Any update will be incorporated
in a later edition of this manual.
©2007 Avery Dennison Corporation. All rights reserved. No
part of this publication may be reproduced, transmitted,
stored in a retrieval system, or translated into any
language in any form by any means, without the prior
written permission of Avery Dennison.
WARNING
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
CANADIAN D.O.C. WARNING
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications. Le présent appareil numérique n’émet pas de
bruits radioélectriques dépassant les limites applicables aux appareils numériques
de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte
par le ministère des Communications du Canada.
Trademarks
FreshMarx® and 9415 are trademarks of Avery Dennison Retail Information
Services, LLC.
Avery Dennison® is a trademark of Avery Dennison Corp.
Avery Dennison Printer Systems Division
170 Monarch Lane
Miamisburg, OH 45342
i
TABLE OF CONTENTS
GETTING STARTED..........................................................1-1
Using This Manual.......................................................1-1
Audience ....................................................................1-1
Unpacking the Printer...................................................1-2
Installing the Printer.....................................................1-3
Connecting the Printer’s Power Supply ..........................1-4
Loading Labels............................................................1-5
PRINTING LABELS...........................................................2-1
About the Printer .........................................................2-2
Calibrating the Touch Screen........................................2-2
Calibrating the Touch Screen........................................2-3
Printing Freshness Labels ............................................2-4
Reprinting a Label .......................................................2-6
Printing Use First Labels ..............................................2-8
Sleep Mode.................................................................2-8
Future Upgrades..........................................................2-8
CARE & MAINTENANCE....................................................3-1
Clearing Label Jams ....................................................3-2
Cleaning the Printhead.................................................3-3
Cleaning the Touch Screen Display ...............................3-4
Cleaning the Printer.....................................................3-4
TROUBLESHOOTING........................................................4-1
Technical Support........................................................4-3
Printing a Diagnostics Label .........................................4-4
ii Operator’s Handbook
LABEL FORMATS ............................................................A-1
Format 1 .................................................................... A-1
Format 2 .................................................................... A-2
Format 3 .................................................................... A-3
Format 4 .................................................................... A-4
Format 5 .................................................................... A-5
Format 6 .................................................................... A-6
SPECIFICATIONS ............................................................B-1
Printer Specifications .................................................. B-1
Supply Specifications .................................................. B-1
Getting Started 1-1
GETTING STARTED
Use the FreshMarx® 9415™ Labeling System
for product freshness and to label inventory. This
system is available as a single or dual printer.
Information in this document supercedes information
in previous versions. Check our Web site for the latest
documentation and release information.
Using This Manual
Following is a summary of the contents of this manual:
Chapter Contents
1 Getting Started Unpacking and installing the
printer and loading supplies.
2 Printing Labels Selecting and printing freshness
labels.
3 Care &
Maintenance Clearing supply jams and
cleaning the printer.
4 Troubleshooting Common problems and their
solutions.
A Label Formats Format sizes and content fields.
B Specifications Printer and supply
specifications.
Audience
The Operator's Handbook is for the person who prints
and applies labels.
1
1-2 Operator’s Handbook
Unpacking the Printer
After you unpack the printer, you should have the
following:
9415 printer
power supply and cord
4 wall anchors
wall mount template
Keep all packaging material in case you need to move
or return the printer.
Caution: Do not touch the electrical connectors
while setting up the printer. Static
electricity can damage or destroy the
electronic components.
Getting Started 1-3
Installing the Printer
To install the printer on the wall:
1. Select a suitable location for the printer on a wall.
2. Tape the wall mount template to the wall in the
selected location.
Caution: The template must be level or the printer
will not install correctly.
3. Install the four wall anchors according to the four
outside holes indicated on the template.
4. Remove the template.
5. Lower the supply door on the printer so you can
see the mounting holes on the back of the printer.
6. Attach the printer to the wall anchors using the
corresponding holes on the back of the printer.
7. Press down firmly on the printer to lock it in place.
8. Close the supply door.
Mounting holes in back of printer
1-4 Operator’s Handbook
Connecting the Printer’s Power Supply
To connect the power supply to the printer:
1. Turn off the printer. Press the power switch on
the side of the printer to the off (O) position.
2. Place the power supply in a suitable location,
preferably on a table, near an electrical outlet.
3. Plug the three-hole end of the AC adapter cable
into the three-pronged outlet in the printer’s power
supply.
4. Plug the L-shaped end of the power supply cable
into the socket on the side of the printer.
5. Plug the three-pronged end of the AC adapter
cord into a grounded electrical outlet.
Warning: The printer and power supply should
never be operated in a location where
either one can get wet. Personal injury
could result.
Power socket
L-Shaped
Connector
Getting Started 1-5
Loading Labels
Dual printer: Printer 1 is located on the left and
Printer 2 is located on the right. Printer 1 is the
default printer for all categories and formats.
Single printer: Printer 1 (located on the left) is the
only available printer. There is no option to assign a
format to a printer.
The first time you load the printer after receiving it you
must remove and discard the thermal paper from the
printer slots.
1. Turn on the printer. Press the power switch on the
side of the printer to the on (I) position.
2. Press to remove the thermal paper from the
printer, if necessary.
3. Remove and discard the tape from a new roll of
labels.
4. Lower the supply door.
5. Slide a roll of labels onto the supply holder.
If necessary, adjust the supply holder guide so it
touches the roll.
6. Feed the labels, printing side up, into the supply
slots in the supply door.
Note: Make sure no label adhesive is exposed when
loading labels. This causes jams.
1-6 Operator’s Handbook
7. Make sure the supply clip is in the correct position
to touch the edge of the supply. This clip guides
the labels through the supply slot so they do not
shift while printing.
8. Close the supply door.
The printer calibrates the labels automatically.
Supply Holder
Guide
Dual printer shown
Supply clip
Printer 2
Printer 1
Supply slot
Other manuals for FRESHMARX 9415
3
Table of contents
Other Avery Dennison Label Maker manuals
Avery Dennison
Avery Dennison FRESHMARX 9415 User manual
Avery Dennison
Avery Dennison TTX 450 Troubleshooting guide
Avery Dennison
Avery Dennison ALS 330/430 User manual
Avery Dennison
Avery Dennison 64 Series User manual
Avery Dennison
Avery Dennison ALS 430 User manual
Avery Dennison
Avery Dennison 64-Series User manual
Avery Dennison
Avery Dennison ALX 92x User manual
Avery Dennison
Avery Dennison ALS 230 User manual
Avery Dennison
Avery Dennison FRESHMARX 9415 Service manual
Avery Dennison
Avery Dennison ALS 450 User manual
Avery Dennison
Avery Dennison ALS 341 User manual
Avery Dennison
Avery Dennison SNAP 700 User manual
Avery Dennison
Avery Dennison ALX 92x User manual
Avery Dennison
Avery Dennison ALS 421 User manual
Avery Dennison
Avery Dennison Monarch 1115 User manual
Avery Dennison
Avery Dennison 221 RH User manual
Avery Dennison
Avery Dennison ALX 92x User manual
Avery Dennison
Avery Dennison Pathfinder 6057 Instruction Manual
Avery Dennison
Avery Dennison AP5.4 Gen II Troubleshooting guide
Avery Dennison
Avery Dennison AP4.4 User manual
