AVer AVerVision F70W User manual

Note: Please referto the F70WV2 support

page FAQs formore advance Wireless

setup.

www.averusa.com/support

Plug-in the WiFi dongle to PC/laptop.

P2P connection via Wi-Fi Dongle(Windows)

Equipment needed: F70WV2 w/power adapter, PC/w Wi-Fi Dongle and Sphere 2 installed

21 3 4

Run Sphere2 on your laptop.

7 8

Open menu.

Install AVer Sphere2 application

on laptop.

Enable WiFi function.

Go to the WiFi setup tab > AP Mode.

Wi-Fi Dongle Laptop

AVer Sphere2

Laptop

Note: Download Sphere2 application from

bleow URL.

www.averusa.com/education/support/aplus-suite

Select F70WV2 to connect.

Then, WiFi will be connected.

Connect F70WV2 to HDMI display

and plug in power adapter.

LCD/DCP projector HDMI monitor

Connect the WiFi dongle to MacBook.

P2P connection via Wi-Fi Dongle(MAC)

Equipment needed:F70WV2 w/power adapter, MacBook/w Wi-Fi Dongle and Sphere 2 installed

21 3 4

6 7 8

Open menu. Open Network Preference.

Install AVer Sphere2 application

on MacBook.

Enable WiFi function.

Wi-Fi Dongle MacBook MacBook

Note:

■Download Sphere2 application from

bleow URL.

www.averusa.com/education/support/aplus-suite

■Unzip the ﬁle and install Wi-Fi dongle drive

and Sphere2 on your MacBook.

AVer Sphere2

Wi-Fi Dongle drive

MacBook connects to F70WV2 Wi-Fi.

Go to the WiFi setup tab > AP Mode.

Note:The default password is “AVeradmin”.

Connect F70WV2 to HDMI display

and plug in power adapter.

LCD/DCP projector HDMI monitor

Select Set Service Order to set Wi-Fi as

1st network service.

109 11 12

Drag Wi-Fi to top of list. Click Apply to save the changes.

Note: Please referto the F70WV2 support

page FAQs formore advance Wireless

setup.

www.averusa.com/support

Run Sphere2 on your MacBook.

Then, select F70WV2 to connect.

Note: Click OK to save the changes.

AVerVision F70WV2

Note: Referto the “Connecting to

HDMI” instructions to connect the F70WV2

to an HDMI display. This only needs to

be done once forthe initial WiFi setup.

Note: after connecting the F70WV2 to your

network, you no longerneedto use an

HDMI display or repeat these steps. Just

remember to toggle the “WiFi” button

every time you want to stream video

wirelessly (insteadof USB).

Note: Please referto the F70WV2 support

page FAQs formore advance Wireless

setupandaccess if you are having diﬃculty

setting the camera from the camera drop

down box.

www.averusa.com/support

Connect F70WV2 to HDMI display

and insert WiFi Dongle.

Enable WiFi function. Open menu. Go to the WiFi setup tab.

Connecting to WiFi

Equipment needed: F70WV2 w/power adapter, PC/Mac w/A+ Suite installed, access to WiFi network

1 2 3 4

Select SSID and password. Connect. WiFi successfully connected. Open Sphere2, select F70WV2.

5 6 7 8

WiFi Dongle HDMI monitor

AVerVision F70WV2

Note: After connecting the F70WV2 to the

either the AVer IFP or Dongle, the WiFi LED

will ﬂash

Insert WiFi Dongle to F70WV2. Enable WiFi function. Open menu. Run the “Screen Share” app on the

AVer Interactive Flat Panel. If you do

not have an AVer IFP, you can also

connect to a commercial Miracast

Dongle such as the one from

Microsoft (Wireless Adapter).

Connecting via Miracast

Equipment needed: F70WV2 w/power adapter, AVer interactive ﬂat panel, access to WiFi network

1 2 3 4

Select “Miracast” mode and go to

“setup”.

Select the device “AVerBoard_xxxxxx”

(if you have an AVer IFP) or the

Wireless Dongle name as presented

on the screen. Then hit “Connect”.

When connection is successful.

You will see the F70WV2 video being

streamed live on the display.

To disconnect the session, hit the

“Freeze/Stop” button on the camera

once. To reconnect, press and hold

the “WiFi” button until the WiFi LED

blinks. Connection to the either the

AVer IFP or Dongle should take place

after that.

5 6 7 8

WiFi Dongle

Note: Please make sure the panel is

connected to the local WiFi network.

Or if you are connecting to a Wireless Dongle,

please make sure the dongle is plugged into a

display and turned on. Please note down the

IFP name or Dongle name.

Note: You would need to connect the F70WV2

to another monitor display to set this up.

This setup would need to be performed

only once to connect to the

AVer “Screen Share” app.

Insert WiFi Dongle. Connect F70WV2 to HDMI display

and plug in power adapter.

1 sec.

LCD/DCP projector HDMI monitor

Turn on F70WV2. Auto focus camera.

Connecting to HDMI

Equipment needed: F70WV2 w/power adapter, HDMI display, HDMI cable

Note:

Adjust the video input on your

HDMI display andselect the HDMI input

the F70WV2 is connectedto.

Note: F70WV2 defaults to 1280x720 upon

ﬁrst use, change to 1080p in the on-screen

display menu if your display supports it.

1 2 3 4

POWER POWER

WiFi Dongle

Desktop Laptop

Note: if this is the ﬁrst time you are

connecting the F70WV2 to yourPC/Mac,

please wait forthe USB driver to ﬁnish

installing. You can downloadthe

software forfree at

www.averusa.com/support

Note: be sure the WiFi function on the

F70WV2 is disabled (LED indicatorshould

be completely oﬀ– not orange/blue).

Connecting to PC/Mac via USB

Equipment needed: F70WV2 w/power adapter, PC/Mac w/A+ Suite installed, mini USB cable

1 2 3 4

Auto focus camera.Plug in power adapter and

Turn on F70WV2.

Connect F70WV2 to PC/Mac

via mini USB cable.

Open Sphere2, select F70WV2.

1 sec.

POWER POWER

AVerVision F70WV2

1. POWER

2. CAMERA

3. RECORDING

4. CAPTURE

5. ROTATE

6. MENU

AUTO FOCUS

8. ZOOM +/-

9. ENTER

10. LAMP

Remote Control

The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are installed properly before use.

For User Manual and Software, please visit the link below.

http://averusa.com/classroom-technology/support/

Contact Information

AVer Information Inc. USA

668 Mission Court,

Fremont, California 94539 USA

Toll Free: (877) 528-7824

Email: support.usa@aver.com P/N:300AP0DW-???

Other manuals for AVerVision F70W

Table of contents

AVer AVerVision F70W User manual

Popular Document Camera manuals by other brands