ausdom ANC1 User manual
ANC1
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
English
1 - 11
Čeština
12 - 22
Slovenčina
23 - 33
Magyar
34 - 44
Deutsch
45 - 55
1
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
2
Package Contents
•Wireless headphones
•Micro-USB charging cable
•3.5mm audio cable
•Compact carrying bag
Product Overview
1. Next track / volume+
2. Power button
3. Previous track / volume-
4. 3.5mm line-in port
5. Microphone
6. Micro-USB interface for charging
7. LED indicator / charging LED /
ANC LED indicator
8. ANC slider
9. Micro USB charging cable
10. 3.5mm audio cable
Charging the Headphones
Use the supplied micro-USB charging cable to recharge the headphones. It takes
approximately 2.5 hours for the first charge, and only 2 hours for subsequent recharges.
The headphones LED turns to solid red during charging. When the battery is fully
charged, the LED turns off. In order to not affect the charging time, please turn off the
wireless function during charging, but you can use the headphones with the audio cable.
When the battery is low, the LED indicator lights up red. At the same time, the headset
also provides a low battery warning tone.
Note: It is strongly recommended to fully charge before the first use. Playtime varies
according to the volume level and audio content.
3
Pairing with Wireless Devices
Pairing the Headphones with a Computer
Before pairing your headset with your computer, make sure your computer or laptop
has Bluetooth wireless capabilities. If not, you must purchase a Bluetooth wireless
dongle, preferably of version 2.1 and higher.
First, make sure the headphones are off. Then, turn on the wireless capability on the
computer. The “Search new device” screen will be displayed. Do not place both devices
more than one meter away from each other. Then, press and hold the power button on
the headphones until it powers on, but don’t let go just yet. Continue holding down on
the power button until you see the LED indicator flash blue and red alternately, which
means your headphones are in the pairing mode, waiting to be paired with your device.
You will hear a prompt. As soon as the computer system detects the new device, select
“AUSDOM ANC1” to pair. Once successfully paired, the LED turns to solid blue and you
will hear a prompt.
Pairing the Headphones with a Phone
First, make sure the headphones are off. Do not place both devices more than one
meter away from each other. Then, press and hold the power button on the
headphones until it powers on, but don’t let go just yet. Continue holding down on the
power button until you see the LED indicator flash blue and red alternately, which
means your headphones are in the pairing mode, waiting to be paired with your device.
You will hear a prompt. Turn on the wireless capability of your phone and search for
new devices, then select “AUSDOM ANC1” to pair. Once successfully paired, the LED
turns to solid blue and you will hear a prompt.
Connecting to Paired Devices
AUSDOM ANC1 will pair with the last paired device automatically when turned on.
Because of different systems, some computes or laptops may need to be manually
connected every time.
Micro-USB
charging cable
USB charging adapter
Laptop for power supply
4
Active Noise Cancelling
AUSDOM ANC1 contains a noise cancelling circuit. This means that noise produced by
airplanes, buses or trains is effectively reduced. The noise cancelling effect may not take
effect in a very quiet environment and some ambient noises still may be heard. It also
depends on how you wear the headphones. The noise cancelling function works for
noise in the low frequency band primarily. Although noise is reduced, it is not cancelled
out completely.
Making and Answering a Call
Making a Call
Make sure the headphones are paired with the mobile phone. Dial through the mobile
phone and press the call button on the phone. To end the call, press the power button
once or end the call directly on the phone.
Answering a Call
Make sure the headphones are paired with the mobile phone. Press the power button
on your headphones to answer the call using headphones. If you are listening to music,
it will pause automatically. To end a call, press the button once again or end the call
directly on the phone. As soon as the call is ended, the music will continue to play
automatically.
Used as a Wired Headphones
There is a 3.5mm audio port in the right side of the ear cup in which you can pug the
included audio cable. It enables you to connect ANC1 to other devices via 3.5mm audio
cable. When the headphones’battery is low, you can still enjoy the music without
worrying about battery drain.
Note: The microphone doesn’t work when used as wired headphones.
5
Caution
•Store the headphones in a dry place when it powers off.
•If you don’t use the headphones for a longer period of time, charge the battery at
least every two months for one hour.
•Use a dry cloth for cleaning if needed.
•Avoid dropping the headphones from high places or on hard surfaces.
•Avoid exposing the headphones to extreme temperature.
•Recommended storage temperature is between -40 °C to 80 °C.
•The headphones are not waterproof. Avoid exposing the headphones to rain or
getting liquids into any button port or other openings.
•Please don’t twist or bend the headphones. This may cause permanent
deformation.
•The built-in battery can’t be disposed in the fire to avoid explosion.
Protecting Your Hearing
The headphones are held close to your ears, so loud sounds pose a potential hearing
risk. It is highly recommended that you set a low volume level before putting on the
headphones and avoid exposing yourself continuously to high volumes. If you need to
use the headphones for a long period of time, rest ten minutes per half hour using.
6
Control Instructions
Power ON
When the headphones are off, press and hold the
power button for three seconds, you will see the blue
light and hear “power on”.
Power OFF
When the headphones are on, press and hold the
power button for three seconds, you will hear “power
off”.
Pairing
Press and hold the power button for about five
seconds until the red and blue light flash alternately.
You will hear “pairing”.
Increase volume
Press the volume up button.
Decrease volume
Press the volume down button.
Play music/video
Press the power button.
Pause/restart music/video
Press the power button.
Skip to next track
Press and hold the volume up button for one to two
seconds.
Skip to previous track
Press and hold the volume down button for one to
two seconds.
Answer the call
When the call rings, press the power button.
End the call
To end the call, press the power button.
Noise cancelling ON
Push the ANC switch to ON, blue light is on.
Noise cancelling OFF
Push the ANC switch to OFF, blue light is off.
Note: There will be an alert tone when the volume reaches the maximum level.
7
Troubleshooting
Q: The headphones cannot be turned on.
A: The battery may be discharged. Please recharge the battery and try again.
Q: Why don’t the headphones pair with the mobile phone?
A: Please, check the following:
•Check that the headphones are on a full charge.
•Make sure that the mobile phone’s wireless function is on.
•Make sure the device is not connected to another wireless audio devices.
•Make sure the two devices are in the effective pairing range (10 meters).
•Make sure that there are no obstacles between the headphones and the mobile
phone, such as electronic equipment and a wall.
•Furthermore, make sure that the headphones are in a pairing mode and pair
them with your device again.
Q: There is no sound.
A: Please check the following:
•Try increasing the volume.
•Make sure that the wireless function is on and whether the two devices are
connected and within 10 meters with no obstacles.
Q: My device cannot find the headphones.
A: Please check that the headphones are in pairing mode. Refer to the “Pairing with
Wireless Devices” chapter. Sometimes when the headphones are connected to too many
wireless devices, it cannot search and pair effectively to other devices. Or maybe your
device is connected to too many wireless devices already. Try removing some
connections before searching the headphones.
8
Specifications
Microphone
Microphone unit size
4×1.5mm
Directivity
Omni-directional
Operating voltage
2V
Speakers
Speaker diameter
Ø40mm
Frequency response
20Hz-20KHz
Wireless
technology
Wireless version
V5.0
Wireless distance
10 meters
Support profile
HSP/HFP/A2DP/AVRCP
Pairing name
AUSDOM ANC1
Battery
Battery type
Built-in 500mAh rechargeable lithium
battery (fast charging supported)
Charging port
Micro-USB 5V/1A
Playtime
~30 hours (ANC OFF)
~22 hours (ANC ON)
Stand-by time
2500 hours
Charging time
~1 hour
Operating temperature
-10°C-45°C
Note: Features and technical specifications are a subject to change without prior notice.
We apologize for any inconvenience.
Table of contents
Languages:
Other ausdom Wireless Headphones manuals
ausdom
ausdom AH862 User manual
ausdom
ausdom M06 User manual
ausdom
ausdom AH861 User manual
ausdom
ausdom AH2 User manual
ausdom
ausdom AH850S User manual
ausdom
ausdom Bass One User manual
ausdom
ausdom ANC8 User manual
ausdom
ausdom ANC10 User manual
ausdom
ausdom M04S User manual
ausdom
ausdom Mixcder E9 PRO User manual
