ausdom X1 Pro User manual
X1 Pro
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
English
1 - 9
Čeština
10 - 17
Slovenčina
18 - 26
Magyar
27 –35
Deutsch
36 –44
1
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
2
Note: The UV sterilization light will turn on automatically when the charging case is
closed and turn off automatically when the charging case is opened.
Overview
Initial Use
The earbuds will be activated automatically once the lid is opened.
Note: Both earbuds will be charging after putting them into the charging case and
closing the lid. If the earbuds cannot be charged, please charge the charging case by
inserting the type-C cable at the same time.
Eartip (L)
Eartip (M)
Eartip (S)
UV sterilizer
Indicator light /
Microphone
Multifuncion
button
Charging contacts
Power indicator
Wireless charge
Charging jack
3
Pairing and Connection with the Cell Phone
Open the lid to activate the earbuds automatically, both earbuds will be automatically
ready to pair. Search for “Mixcder X1 Pro” in the cell phone and connect them.
Restoring the Factory Settings
Press and hold the multifunction buttons on both earbuds for eight seconds in power
off mode. Don’t release your fingers until red and purple lights flash alternately. At this
moment, both earbuds will be automatically paired with each other, the red and purple
lights will turn off. Put the earbuds into the charging case, they will automatically be
ready to pair again. Search for “Mixcder X1 Pro” in the cell phone and connect them.
Wearing the Earbuds
Put the earbuds in your ear so the microphone is upwards (see the picture).
4
Charging
Put both earbuds into the charging case and ensure the pins are in contact with the
earbuds. The earbuds will automatically power off and begin charging when the lid is
closed.
Charging the Charging Case
Plug the USB-C cable into the USB-C charging port on the earbuds’ case. Check the
battery indicator. If the battery indicator shows nothing, check whether the charging
cable is connected well. The charging case supports wireless charging as well.
Operating Instructions
Bellow are the instructions for using the earphones.
Powering On
Either open the lid of the charging case or press and hold the multifunction button for
three seconds.
Powering Off
Either put the earbuds back into the charging case and close the lid or press and hold
the multifunction button for three seconds.
Answering/Rejecting the Incoming Phone Call
Press the multifunction button to answer incoming call and press again to hang up.
Reject the Incoming Call
Press the multifunction button for one to two seconds to reject the incoming call.
Automatically Connect with the Last Device
Open the lid, the earbuds will automatically connect with the device which has been
used with the earbuds for the last time.
Next Track
When music is playing, press and hold the multifunction button of the right earbud for
two seconds to switch to the next track.
5
Last Track
When music is playing, press and hold the multifunction button of the left earbud for
two seconds to switch to the next track.
Play/Stop
When music is playing, press the multifunction button of either earbud to stop or play
the current song.
Volume Down
When music is playing, double press the multifunction button of the left earbud to turn
down the volume.
Volume Up
When music is playing, double press the multifunction button of the right earbud to turn
up the volume.
Specifications
Model
Mixcder X1 Pro
Bluetooth version
5.1
Bluetooth profiles
HSP, HFP, A2DP, AVRCP
Frequency
2.4GHz-2.48GHz
Charge current of earbuds
40mA
Charge time
~1.5 hours
Input voltage of the charging case
DC 5V/500mA
Output voltage of the charging case
DC 5V
Transmission power
Class II
Wireless range
>10m
Talk time
~10 hours
Play time
~10 hours
Impedance
16Ω
Microphone
Silicon microphone
Single earbud weight
3.9g
Charging case weight (without earbuds)
41.8g
6
Safety Precautions
Mixcder X1 Pro are of excellent quality, and in order to extend lifespan, please refer to
the instructions below:
•Please keep the earphones out of extreme heat, humidity and corrosion
environment.
•Please prevent the earphones from being struck, fell, warped, soaked etc.
•Please don't dismantle the earphones or the charging case.
•Please don't overcharge the earphones for quite a long time, otherwise, it will
decrease lifespan.
•Please use DC 5V/500mA chargers/adapters certified by a regulated
manufacturer.
•Please stop using the earphones if it causes any discomfort or pain.
•Keep out of reach of children, risk of swallowing small parts or suffocation.
Protecting Your Hearing
The headphones are held close to your ears, so loud sounds pose a potential hearing
risk. It is highly recommended that you set a low volume level before putting on the
headphones and avoid exposing yourself continuously to high volumes. If you need to
use the headphones for a long period of time, rest ten minutes per half hour using.
7
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
8
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Wireless headphones
Model / Type: Mixcder X1 Pro
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 23.8.2021
Table of contents
Languages:
Other ausdom Headphones manuals
