ausdom SM199 User manual
User’s Manual
Wireless Earphone
MODEL: SM199
1. Introduction
2. Package Contents
3. Product Overview
Thank you for purchasing the AUSDOM SM199 wireless
earphone. The earphone provides light-weight rich sound,
wraps around the ear for increased stability that are ideals for
the sport user. The feature friendly buttons design that makes
it easy to operate the play, stop and skip audio functions and
answer a call with hands-free. Built-in rechargeable battery
provides more music playing and standby time. Through
Bluetooth V4.1 to communicate with your Bluetooth-enabled
device till 10 meters range, SM199 brings you a powerful bass
sound and amazing audio enjoyment.
Note: Please read the user’s manual carefully before using,
and keep it properly for future reference.
- Wireless earphone*1
- Micro USB charging cable*1
- Ear buds*2 sets
- Multi-functional packaging*1
- User’s manual*1
EN-1
Ear Buds
Ear Bud
Shirt Clips
LED
Volume-/Next Track
Function Button (Power On/Off/Pause/Play)
Volume+/Previous Track
Micro USB Charging Port
Mic
EN-2
4. Features
- Wireless communication through Bluetooth 4.1 technology.
- Power bass for an enhanced music experience.
- Optimized comfort for an active life style.
- Comfortable lightweight in-ear design with soft ear buds for
added support.
- Built-in rechargeable battery with up to 9 hours of talking
time, 8 hours of music playing time.
- With high-tech silicone materials to avoid the sweat permeate.
- Features play/pause, answer/end, volume up/down and skip
track buttons.
5. Charging the Battery
Open the plastic plug of USB connector. Connect the micro
USB charging cable to any power source and the USB
connector of your earphone for charging. The earphone LED
turns to solid red during charging. It takes about 1.5 hours for
the charge. When the battery is fully charged，the Red LED
turns off.
You can also use the Bluetooth function during charging but
will extend the charging time.
When the battery is low, the LED flashes red. At the same time
the earphone also provides a low battery warning tone.
Note: It is strongly recommended fully charging for the first
use.
Multi-Functional PackagingMicro USB Charging Cable
EN-3
6. Pairing with Bluetooth Devices
6-1 Pairing the earphone with a computer
Before pairing the earphone with your computer, please make
sure your computer or laptop has the built-in Bluetooth feature.
If not, you must purchase a Bluetooth dongle, preferably
version 2.1 or above.
1. Make sure the earphone is off.
2. Start the Bluetooth program in the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than one meter away from
each other.
5. Press the function button for 5-6 seconds until the LED
flashes blue and red alternately to enter pairing mode. You will
hear “ready to pair".
6. As soon as the system detects the new device and select “
AUSDOM SM199".
7. If your computer ask you to enter the PIN code, please enter
0000 (4 zero). Once successfully paired, the blue LED is
always on. You will hear "pairing completed".
6-2 Pairing the earphone with a phone
1. Make sure the earphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press the function button for 5-6 seconds until the LED
flashes blue and red alternately to enter the pairing mode. You
will hear “ready to pair".
4. Start Bluetooth function on your phone and search for new
devices.
5. Select the “AUSDOM SM199” to pair. Once successfully
Laptop for Power Supply
Micro USB Charging Cable
EN-4
7. Making and Answering a Call
8. LED Indicator
7-1 Making a call
1. Make sure the earphone is pairing to the mobile phone. Dial
through the mobile phone and press the call button on the
phone.
2. To end a call, press the function button once again or also
end the call directly by the phone.
7-2 Answering a call
Make sure the earphone is pairing with your phone. Please
refer to chapter 6. Pairing with Bluetooth devices.
1. When a call incoming, the earphone will sound the prompt
voice.
2. Press the function button on your earphone or the answer
key on your phone to answer the call.
3. To end a call, press the function button once again or also
end the call directly by the phone.
Bluetooth Connection
Hallo
Incoming Call
Hello
paired, the blue LED is always on, You will hear "pairing
completed".
Note: The earphone will power off if not paired within 10-12
minutes.
6-3 Connecting to paired devices
The earphone will pair with the last paired device automatically
when powered on. But for some computers or laptops you will
need to manually pair every time.
EN-5
DescriptionStatus
Flashing Blue
No Light
Solid Red
Solid Blue
Blue and Red Alternately
Flashing Red
Power on/Standby
Power off
Charging
Pairing completed
Pairing mode
Low battery
9. Control Instructions
Play media Press the function button
Skip to next track press and hold next track (+) button.
Switch the call
between a phone
and earphone
Press and hold the function button for
2 seconds to switch the on-line call
between a phone and earphone.
Redial the last
number
Press and hold the function button 2
seconds during standby or playing
music mode.
Pause/restart
media playback Press the function button
Function Operation
Press and hold the multi-function
button 3 seconds. And the LED flashes
blue 2 seconds and sounds “Power
on”. Then flashes blue for standby.
Press and hold the function button 4
seconds. And the LED flashes red for
2 seconds and sounds “Power off”.
Increase volume
Power off
Power on
Decrease volume
Press the function button to answer
the call.
Reject a call
Answer a call
Press and hold the function button for
2 seconds
End a call Press the function button during
on-line call.
Press the volume up (+) button.
Press the volume down (-) button.
EN-6
Note:
- There will be a prompt tone when the volume reaches the
maximum level.
- You can only pair and connect one device every time. To
switch Bluetooth device, disconnect the earphone from the
current device (disable the Bluetooth feature) before connecting
to another.
- Store the earphone with power off and in a dry environment.
- If you don’t use the earphone for a long period, charging the
battery every 2 months for 1-2 hours.
- Don’t charge the battery beyond the rating.
- Keep the temperature at 0˚C-40˚C during charging.
- Don’t put the earphone on combustible substances (bed and
carpet) during charging.
- Don’t disassemble and replace the built-in battery on
yourself, this will cause damage the earphone.
- Use a dry cloth for cleaning if needed.
- Avoid dropping the earphone from high places or on hard
surfaces.
- Avoid exposing the earphone to extreme temperature.
(Recommended Storage temperature is -40˚C-70˚C.)
- The earphone is NOT waterproof. Avoid exposing the
earphone to rain or getting liquids into any button port or other
openings.
- Please don’t twist or bend the earphone. This may cause
permanent deformation.
10. Take Care Your Earphone
Skip to previous
track press and hold previous track (-)
button.
Pairing mode
Press and hold the function button to
enter pairing mode after sounding
power on. (LED flashes blue and red
alternately when entering the pairing
mode.)
EN-7
11. Protecting your Hearing
The earphone is held close to your ears, so loud sounds pose
a potential hearing risk.It is highly recommended that setting
low volume level before putting on the earphone and avoiding
exposing yourself continuously to high volumes.
12. Troubleshooting
Q: The earphone cannot be powered on.
A: The battery may be flat. Please recharge the battery and try
again. Refer to chapter 5. Charging the Battery.
Q: Why doesn’t the earphone pair with the mobile phone?
A: Please check the followings.
- Check that the earphone is charged and is in pairing mode.
- Make sure that the mobile phone's Bluetooth function is on.
- Make sure that the two devices are in the effective pairing
range. (10 meters)
- Make sure that there is no obstacle between the earphone
and the mobile phone, such as electronic equipment and a
wall.
- Furthermore, you can try restarting the earphone and pairing
it with the mobile phone again.
Q: There is some noise.
A: Bluetooth is a radio technology, so it is sensitive to
obstacles between the earphone and the pairing device.
Please make sure that there is no obstacle between the two
devices and is within the range. (10 meters)
EN-8
The SM199 is covered by a 1-year manufacturer warranty.
For more information, visit: www.ausdom.com/warranty.
14. Specifications
13.Warranty
Q: I can't hear sound.
A: Please check the followings.
- Try increase the volume.
- Make sure that the Bluetooth function is on and whether the
two devices are connecting and in the range. (10 meters)
- Make sure the earphones are close enough to your device,
and there is no obstacle between them.
Q: My mobile phone or computer cannot find the earphone.
A: Please check that the earphone is in pairing mode. Refer to
chapter 5. Pairing with Bluetooth devices. Sometimes when
the earphone is connected too many Bluetooth devices, it
cannot search and pair effectively. Or your mobile phone and
computer are already connected to many other devices. Try
removing some connections before searching the earphone.
EN-9
Microphone
Spec.
Microphone Unit Φ4.0*1.5mm
Directivity Omni-directional
S.P.L -42±3dB S.P.L at 1KHz
Operating Voltage 1-10V
Impedance < 2.2KΩ
Frequency Response 100Hz-10KHz
Speaker Diameter Φ10±0.3mm
Impedance 16Ω±15%
S.P.L 82dB±3dB
THD ＜3%
(200Hz-10KHz,1m W）
Frequency Response 100Hz-10KHz
Bluetooth Version 4.1
Bluetooth Distance 8m(outdoor) 15m(indoor)
Transmission Range
(Hz) 2.402GHz-2.48GHz
Sensitivity -82dBm
Support Profile HSP/HFP/A2DP/AVRCP
Built-in 120mah
rechargeable lithium
battery
Pairing Name
Battery Type
AUSDOM SM199
Charging Port Micro USB 5V/1A
Speaker
Spec.
Bluetooth
Spec.
About 9 hours
talking/About 8 hours
music playing
Running Time
More than 4000 hoursStandby Time
About 1.5 hours
Charging Time
-20˚C-60˚C
Operating
Temperature
Storage Temperature -40˚C-70˚C
Battery Spec.
Note: Features and technical specifications are subject to
change without notice, we apologize for any inconvenience.
Table of contents
Languages:
Other ausdom Headphones manuals
