Audiovox HR7008PKG User manual

OPERATION

MANUAL

128-8312

HR7008PKG

Two Specific Vehicle Headrests

With 7" LCD Monitors Touch Screen control

and Built-In

DVD Player for Rear Seat Entertainment

Licensed under one or more of the following patents,

Patent NOS. 5,775,762 and 5,927,784

IMPORTANT

Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them.

Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets). Damage to air bag wiring can

result in personal injury to vehicle occupants. If you have any questions regarding wire routing or installation in a vehicle, please contact

Audiovox Technical Support at 1-800-225-6074.

When connecting power and ground in a mobile video installation, insure that the ACC wire is fused at the point where it is connected to

the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point

and the mobile video product.

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used

for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television

reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is

in "park" or when the vehicle s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the

parking is not applied must be installed to the rear of the driver s seat where it will not be visible, directly or indirectly, to the operator of the

motor vehicle.

HR7008PKG

The HR7008PKG contains two vehicle specific head-rests. Each has a 7" Monitor with touch screen control and built-in DVD Player. This

system allows the users to either watch individual DVD s or watch the same DVD on both monitors. Both users can also share others program.

The full function remote control can operate either unit by selecting MI or M2 on the remote.

Quick Start Guide

1. Turn on the M1 monitor, push the center tab at the top of the screen, screen down.

2. Insert a DVD, CD or MP3 disc into the slot, disc label toward driver.

3. The disc will start playing.

4. Tilt the monitor to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable

viewing position).

5. Each wireless headphone has a CH A/CH B switch. When sitting in front of the M1 screen, use the CH A switch setting. When sitting

sitting in front of the M2 screen, use the CH B switch setting. Set the headphone to the proper channel and press the Power

On/Off switch. The power indicator will light up red. Turn the volume down to its lowest setting before putting them on your head.

6. When the DVD menu appears, select the menu item using the cursor keys and touch the OK or Play button.

7. If audio playback through the vehicle radio is preferred, use the FM transmitter On/Off button on the remote control. Set the vehicle

radio to the channel selected on the M1 monitor. If interference with a local radio station occurs, set the FM modulator to one of the

other 16 radio frequencies using the CHANNEL SELECT button on the remote control.

8. Turn on the M2 Monitor using the power button on the front of the screen or remote control.

9. Tilt the screen to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing position).

10. Touch the screen and touch on M1 or use remote control to press SOURCE to view program from M1 or select from the other

available sources DVD, MEMORY CARD, USB, A/V IN or SMART PORT AUX for M2 Monitor.

NOTE: To operate the M1 screen, press M1 on the remote control.

To operate the M2 screen, press M2 on the remote control.

1) The HR7008PKG SYSTEM is a versatile audio / video system with built-in DVD player HR7008M1/M2 which includes two touch screen monitors,

that can accept an Audio / Video input and independent AUX input. A separate audio output is provided for connecting an optional FM Modulator

to the vehicle's radio.

2) The M1 Monitor (HR7008M1) is comprised of a 7" touch screen TFT LCD monitor with built-in DVD player that allows the user to select from the

DVD/SD/USB, Source from M2, AV input, Smart Port/AUX, and the Game source. The M1 monitor has a built-in infrared audio transmitter (CH A)

for use with the optional two-channel wireless headphones (CH A).

3) The M2 Monitor (HR7008M2) is comprised of a 7" touch screen TFT LCD monitor with build in DVD Player that allows the user to select from the

DVD /SD/USB, Source from M1, AV input and Smart Port. The M2 monitor has a built-in infrared audio transmitter (CH B) for use with the optional

two channel wireless headphones (CH B).

4) The monitors will show all of the functions with the comprehensive OSD and touch screen UI OSD.

5) The optional two-channel wireless Headphone sets have an A-B switch that allow the user to select the audio from either M1 (HR7008M1, CH A)

or M2 (HR7008M2,CH B).

6) Using different IR codes, the M1 Monitor will only respond to the remote control unit when the Monitor Select (M1) button on remote control is

pressed. The M2 Monitor will only respond to the Remote Control unit when the Monitor Select (M2) button on remote control is pressed.

7) The wired headphones allow the user to listen to audio from the system.

8) The M1 (HR7008M1) and M2 (HR7008M2) Monitor will accept an audio / video input through the 1/8" jack located on the front of the unit. The

audio / video device could be a video game system, video camera, or other input device.

HR7008PKG SYSTEM OVERVIEW

SMART PORT

HR7008M1/HR7008M2

WIRED HEADPHONE

USBSMART

PORT

TOUCH SCREEN UI OSD

9) Pivot the screen until a comfortable viewing angle reached. The internal lock limits the screen to a maximum adjustment of 19 degrees from closed

position, the headrest itself can be tilted forward to help achieve a comfortable viewing position.

10) Insert/Eject disc and SD Card

19 degrees

Insert/Eject disc

Insert/Eject

SD Card

shaft angle

Inner Ring

Hook

Closed Position

SMART

PORT

PULL UP

USB

JACK

WIRED HEADPHONE

JACK

PUSH UP

19 degrees

Control Function Descriptions for M1 and M2 Monitor

CONTROLS AND INDICATORS DIAGRAM

M1 / M2 Panel Control

1. DVD disc insertion slot

2. EJECT Button - Press this button to eject the disc.

3. SD Card

4. MENU/POWER Button with Power Indicator LED

5. Smart Port

6. IR Transmitter LEDS

7. USB

8. Wired Headphone Jack

9. IR Senser

10. OSD Type Touch Screen

SMART PORT

5 6 7 8

OSD Touch Screen for HR7008 M1/M2

Main page

To turn on the unit by pressing

the power button at left

bottom.

i) Touch the panel to call the

MENU display or press

power button again.

ii) Screen turn on in blue

screen with

M1 unit:

DVD, M2, PICTURE

CONTROL, MEMORY

CARD, A/V IN, SCREEN

MODE, USB, SMART

PORT AUX, MUTE, GAME

& FM MODULATOR.

M2 unit:

DVD, M1, PICTURE

CONTROL, MEMORY

CARD, A/V IN, SCREEN

MODE, USB, SMART

PORT AUX & MUTE.

DVD

Touch the DVD icon to call the DVD display then insert DVD into

slot with label face toward front. The disc will load and read

automatically.

MAIN PAGE

MEMORY CARD

Insert Memory Card / SD Card into SD CARD slot.

Touch the screen or MENU to select the MEMORY CARD display.

Touch the screen or MENU to select M2 display and link with M2

unit display for sharing video & audio.

USB

Plug the devices to USB interface.

Touch the screen or MENU to select the USB display.

A/V IN

Touch the screen or MENU to select A/V IN display and link to

external audio & video supply.

SMART PORT AUX

Touch the screen or MENU to select SMART PORT AUX display.

Touch the screen or MENU to select M1 display and link with M1

unit display for sharing video & audio.

GAME

Touch the screen or MENU to select GAME display. (For M1 only)

The GAME selection is controlled by wireless game controller.

PICTURE CONTROL

Touch the screen or MENU to

select PICTURE CONTROL display.

The contents are selecting BRIGHTNESS, CONTRAST, COLOR,

TINT, RESET & OK.

For adjustment at bottom key by touching +(higher) or

- (lower) then touch OK to exit page.

SCREEN MODE

Touch the screen or MENU to select SCREEN MODE display.

Select and touch the screen WIDE(16:9), NORMAL(4:3) or

SCREEN OFF then touch OK to exit page.

MUTE

Touch the screen or MENU and touch MUTE to attenuate audio

and turn on audio back to normal by touching MUTE again.

FUNCTION KEY CONTROL

Touch the screen to appear function key as shown.

i) Left side key for volume control by touching speaker icon at

above to tone up and bottom to tone down.

ii) Right side key for title/subject selection by touching UP,

RIGHT, LEFT & DOWN then touch "OK".

iii) Bottom key for playback

control by touching

PLAY/PAUSE, FAST

BACKWARD, FAST

FORWARD, BACK, NEXT &

STOP.

touching UP, RIGHT, LEFT

& DOWN then touch "OK".

RESET

BRIGHTNESS CONTRAST COLO

RTINT

BRIGHT NE SS 1 6

FM MODULATOR

Touch the screen or MENU to

select FM MODULATOR display.

(For M1 only)

To turn on FM Modulator by

touching FMM MOD ON then select frequency transmission by

touching -(lower) or +(higher) [88.1MHz ~ 91.1MHz] then touch

OK.

To turn off FM Modulator function by touching FMM MOD OFF

then touch OK to exit page.

REMOTE CONTROL WITH

WIRELESS GAME CONTROLLER OPERATION

Battery Installation

Before attempting to operate your Remote Control, install the

batteries as described below.

1) Turn the Remote Control face down. Using your finger, slide

the battery cover off in the direction of the arrow.

2) Install Three "AAA" batteries. Make sure that proper polarity

(+ or -) is observed.

3) Align the cover tabs with the remote control and slide the

cover until it locks.

The remote control will operate the HR7008M1/HR7008M2. It is not

a universal remote control and will not control equipment from other

manufacturers.

Battery Cover

WIRELESS

1. Use the GAME/REMOTE selector switch to Game position.

2. Use the Select button (page up & page down) to display the

games (1-32). Then use the direction buttons to move the

arrow to the desired game. Press Start to select the game.

3. Press Start to begin the game. Press Start again at any time

to pause the game.

4. Press RESET to return to the game menu.

5. P1/P2 selector switch is use for playing 2 player games. P1

is for M1 player, P2 is for M2 player.

6. M1/M2 selector switch to M1 position is for M1 & M2 player.

7. Use the GAME/REMOTE selector switch to Remote position

after use

GAME CONTROLLER FUNCTIONAL

DESCRIPTION

DIRECTION KEYS

P1/P2

RESET

SELECT

START

GAME/REMOTE

SELECTOR SWITCH

Back View

M1/M2

Function control is available on the unit or touch screen and the

remote control.

Function not available in this model.

POWER Button*

Press this button to turn the unit ON and OFF.

MONITOR SELECT

M1 Button - Change the remote control code to enable the control

of HR7008M1 Monitor.

M2 Button - Change the remote control code to enable the control

of HR7008M2 Monitor.

TV Mode Select Button**

Switches certain function keys on the remote control for TV

functions.

DVD Mode Select Button

Switches certain function keys on the remote control for DVD

functions.

SYSTEM MENU Button**

Allow the user to access the system menu. Press cursor (pq)

buttons to select desired screen mode, OSD language and source

default on power up.

SOURCE Button*

For M1: Each time the button is pressed, the audio /video source will

change in the following sequence: DVD > M2 > AV IN >

SMART PORT / AUX > GAME

For M2: Each time the button is pressed, the audio /video source will

change in the following sequence: DVD > M1 > AV IN >

MAIN FUNCTION DESCRIPTION

POWER

FMM

ON/OFF

SUBTITLE

DVD

SOURCE

DVD

MUTE

SYSTEM

RETURN

IRT

ON/OFF

SOURCE

AUTO

MEMORY

SKIP/

ERASEL

WRITE

123

456

78 9

EJECT

CHANNEL

SELECT

DAY

NIGHT PIX

AUDIO

REPEAT ZOOM A-B

MENU SETUP

M1 M2

DISPLAY

VOLUME

Other manuals for HR7008PKG

Table of contents

Audiovox HR7008PKG User manual

Popular Car Video System manuals by other brands