ATCOM Rainbow1 User manual
Rainbow1 Quick Start Guide
Version 1.0
2014-03-21
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
Content
1. Installation and access ........................................................3
1.1 Connection ......................................................................3
1.2 Installation instruction.......................................................3
1.3 Check IP .........................................................................9
1.4 Login to web ....................................................................9
2. Configure phone to register SIP account.................................9
2.1 Network Configuration.......................................................9
2.2 Account Configuration .....................................................10
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1. Installation and access
1.1 Connection
Set up Rainbow1 as below:
1.2 Installation instruction
1. Desktop installation
A. Put the bottom side of the IP phone upside and press the plate
into the slot, please refer the picture as below:
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
B. Press the other plate into the slot according to the direction of
the arrow
C. It is the right picture after fixing the feet below:
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
D. Disassemble the feet:
Push the plate and pull the feet according to the direction of the
arrow. When the plate is pulled out of the slot, you can take off the
feet
2. Wall-hung Installation
A. Put the bottom side of the IP phone upside and press one-side
joints of wall-hung stand bracket into the slot, please refer the
picture as below:
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
B. Press the other side joints into the slot according to the direction
of the arrow
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
C. After install the wall-hung stand bracket, press one-side joints of
stand bracket into the slot, please refer the picture as below:
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
D. Press the other side joints into the slot according to the direction
of the arrow
E. Knock in nails or screws on the wall according to the proportion
of the distance between the hanging holes as below:
F. It is the right picture after fixing the stand bracket below:
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
G. Disassemble the stand bracket:
Push the spring joint of stand and pull the stand according to the
direction of the arrow.
Rainbow1 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1.3 Check IP
Rainbow1 use DHCP mode by default, and you can review its
current IP address by pressing key when it is powered on and
connected to the network.
1.4 Login to web
Modify your computer’s IP address to the same network as
Rainbow1. Enter Rainbow1’s IP address in the web browser and
press Enter, then you will access to Rainbow1's user webpage
without password.
Click ‘admin’ which is on the right corner to enter administrator
webpage.
2. Configure phone to register SIP account
2.1 Network Configuration
LAN Port Configuration
Enter "Network" -> "Basic" page.
There are 3 ways to connect to internet DHCP, Static and PPPoE,
please choose one according to your own situation.
Other manuals for Rainbow1
4
Table of contents
Other ATCOM IP Phone manuals
ATCOM
ATCOM AT820 series User manual
ATCOM
ATCOM AT-640 User manual
ATCOM
ATCOM AT-620 User manual
ATCOM
ATCOM A20 User manual
ATCOM
ATCOM AT-610 User manual
ATCOM
ATCOM Nimbus CQ400 User manual
ATCOM
ATCOM AT800D User manual
ATCOM
ATCOM Rainbow2 User manual
ATCOM
ATCOM A40 User manual
ATCOM
ATCOM AT800 Series User manual
ATCOM
ATCOM AT800 Series User manual
ATCOM
ATCOM AT800 Series User manual
ATCOM
ATCOM AT820 series User manual
ATCOM
ATCOM AT840 series User manual
ATCOM
ATCOM A10 User manual
ATCOM
ATCOM AT-323 User manual
ATCOM
ATCOM D2X User manual
ATCOM
ATCOM A20 User manual
ATCOM
ATCOM Rainbow1 User manual
ATCOM
ATCOM AT530 User manual
