ATCOM AT840 series User manual

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

Version 1. 0

201 3 - 01 - 15

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

1、Installation and access

......................................................................................................

Ø Installation

...............................................................................................................................

Ø Feet installation instruction

...............................................................................................

Ø Check IP

...................................................................................................................................

Ø Login to AT840's webpage

................................................................................................

2、Configure AT840 to make VoIP calls

............................................................................

Ø Network

....................................................................................................................................

Ø Set password

..........................................................................................................................

Ø SIP Settings

............................................................................................................................

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

Installation

Installation and

and

and access

access

�

Installation

Set up AT840 as below:

�

Feet

Feet installation

installation

installation instruction

instruction

1) Desktop position:

A. Put the bottom side of the IP phone upside and press the plate with letter

“ PUSH ” into the slot, please refer the picture as below:

B. Press the other plate into the slot in accordance with the direction of the

arrow

C. Repeat A and B. It is the right picture of putting on desk after fixing the

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

two feet below:

D. Disassemble the feet:

Press the plate with word “ PUSH ” and pull the feet with the direction of

arrow. When the plate is pull out of the slot (there will be a sound of “ pa ” )

you can take off the feet

2) On wall position

A. Put the bottom side of the IP phone upside and push the plate with letter

“ PUSH ” into the slot, please refer the picture as below:

B. Push the other plate into the slot in accordance with the direction of the

arrow

C. Repeat A and B. It is the picture of wall mounting after fixing the two feet

below:

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

D. Disassemble the feet way:

Press the plate with word “ PUSH ” and pull the feet with the direction of

arrow. When the plate is pull out of the slot (there will be a sound of “ pa ” )

you can take off the feet

�

Check

Check IP

If AT840 is connect to your network. AT840 WAN default to use DHCP, and after

connect WAN to Switch, it will obtain IP automatically. Press "Menu"->

"9.Network" you will see AT840 's current

IP.

�

to AT840's

AT840's

AT840's webpage

webpage

Modify your computer

’

s IP address to the same network as AT840 . Enter AT840

IP addresses in the web browser to go to the log in page, then you will access

AT840 's user web page.

Click "admin" which is on the right corner to enter administrator webpage.

Attention: Please rotate the hook to the position as in

picture with a coin or other tools

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

Configure

Configure AT840

AT840

AT840 to

to make

make

make VoIP

VoIP

VoIP calls

calls

�

Network

Enter "Network" -> "Basic" page.

There are 3 ways to connect to the internet DHCP, Static and PPPoE, please

choose one according to your own situation.

�

Network mode: you can choose DHCP, Static and PPPoE

�

DHCP: AT840 default to use DHCP to obtain dynamic

IP.

�

Static: If you want to set your ip as static, you should fill ip, netmask,

gateway and DNS information.

�

PPPoE: If connect AT840 to modem, you should fill ADSL account and the

password which assigned by your network service provider.

�

Set

Set password

password

Enter "Network" -> "Advance" page.

There are 2 models to set the authority of web accessing and command line:

User model and Admin model. All the parameters can be visible and changed in

Admin mode while part of them can be visible in User mode .

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

�

Enable Web Server: enable or disable web access. If choose "no", you can

not access AT840 webpage.

�

Admin password: set admin webpage access password.(username:admin)

�

User password: set user webpage access password.(username:user)

�

SIP

SIP Settings

Settings

Enter "Account" -> "SIP" page.

�

Enable : whether enable this sip register.

�

Display Name: This name will display on your screen. It will show the User

ID instead if leave display name as blank.

�

User ID: Username of sip account.

�

Authenticate ID : normally is the same with User ID, can also leave it as

blank if there is no special requirement form your sip server.

�

Password: Password of sip account.

�

S ip Server : SIP server address , support both IP address and domain name.

�

S ip Port: SIP server port , default is 5060.

�

Use Outbound Proxy : Whether to use outbound proxy.

�Outbound Proxy Server ：Normally the Proxy server is the same as SIP server.

If they are different then fill in the correct information that provided by ISP.

�

Outbound Proxy Port: Set your proxy server port.

AT840

AT840 Quick

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

�

auto configure this expire time to the server recommended setting if it is

different from the SIP server.

�

Subscribe Expires: The Expires value in SUBSCRIBE message, default is

3600 seconds.

�

Transport Type: UDP/TCP/TLS.

�

SIP 100Rel Require : Require 100rel or not, default is no. If set to yes, the

INVITE message sent will contain the

require:100rel

header field.

After configured and enabled register this account, please check the status of

this account in System Status page.

Other manuals for AT840 series

Table of contents

Popular IP Phone manuals by other brands

Alcatel

Alcatel 4028 manual

Polycom

Polycom Polycom VVX 600 quick reference

Polycom

Polycom SoundPoint IP 450 datasheet

Cisco

Cisco SPA-500 Series user guide

Polycom

Polycom SoundPoint IP 650 user guide

Proximus

Proximus Maestro 3016 IP quick start guide

Fanvil

Fanvil X4 user manual

Cisco

Cisco 7962 user guide

Snom

Snom 320 quick start guide

Yealink

Yealink Yealink SIP-T46G Guide

Avaya

Avaya 4625SW user guide

Yealink

Yealink SIP-T52S quick start guide

Nortel

Nortel 1140E Getting started

Nexotek

Nexotek NT-P500 user manual

Avaya

Avaya Integral 5 R3.0 user guide

GE 28320EE2 - Dect 6.0 InfoLink 2 user guide

Avaya

Avaya 4600 Series Administrator's guide

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP user guide