Asus K013C User manual

User Guide

E10063

ASUS Tablet

First Edition / January 2015

Charging your device

Ensure to fully charge your ASUS Tablet before using it in

battery mode for extended periods. Remember that the power

adapter charges your ASUS Tablet as long as it is plugged into

an AC power source. Be aware that it takes much longer to

charge the ASUS Tablet when it is in use.

IMPORTANT! Do not leave the ASUS Tablet connected to

the power supply once it is fully charged. ASUS Tablet is not

designed to be left connected to the power supply for extended

periods of time.

Airplane precautions

Contact your airline provider to learn about related inight

services that can be used and restrictions that must be followed

when using your ASUS Tablet in-ight.

IMPORTANT! You can send your ASUS Tablet through x-ray

machines (used on items placed on conveyor belts), but do not

expose them from magnetic detectors and wands.

Safety precautions

This ASUS Tablet should only be used in enviroments with

ambient temperatures between 0°C to 35°C (32°F to 95°F).

Long time exposure to extremely high or low temperature

may quickly deplete and shorten the battery life. To ensure the

battery’s optimal performance, ensure that it is exposed within

the recommended environment temperature.

ASUS Tablet

Package contents

NOTES:

• If any of the items is damaged or missing, contact your

retailer.

• The bundled power adapter varies with country or region.

ASUS Tablet Power adapter

ASUS Tablet

Micro USB cable Technical documentations and

warranty card

ASUS Tablet

Your ASUS Tablet

Front camera

Touch screen panel

Front view

ASUS Tablet

Rear view

* The microSD card slot supports microSD, microSDHC, and microSDXC card formats.

Micro USB 2.0 port

MicroSD card slot*

Speaker/Headset port

Microphone

Audio speaker

Rear camera

NFC

Power button

Volume button

ASUS Tablet

Charging your ASUS Tablet

To charge your ASUS Tablet:

Connect the micro USB cable to the power adapter.

Plug the micro USB connector into your ASUS Tablet.

Plug the power adapter into a grounded power outlet.

Charge your ASUS Tablet for eight (8) hours before

using it in battery mode for the rst time.

ASUS Tablet

IMPORTANT!

• Use only the bundled power adapter and micro USB cable

to charge your ASUS Tablet. Using a dierent power adapter

may damage your ASUS Tablet.

• Peel the protective lm o from the power adapter and micro

USB cable before charging the ASUS Tablet to prevent risk or

injury.

• Ensure that you plug the power adapter to the correct power

outlet with the correct input rating. The output voltage of this

adapter is DC 5.2 V, 1.35 A.

• When using your ASUS Tablet while plugged-in to a power

outlet, the grounded power outlet must be near the unit and

easily accessible.

• Do not place objects on top of your ASUS Tablet.

NOTES:

• Your ASUS Tablet can be charged via the USB port on the

computer only when it is in sleep mode (screen o) or turned

o.

• Charging through the USB port of a computer may take

longer time to complete.

• If your computer does not provide enough power for

charging your ASUS Tablet, charge your ASUS Tablet via the

grounded power outlet instead.

ASUS Tablet

Appendices

Federal Communications Commission

Statement

This device complies with FCC Rules Part 15. Operation is

subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to Part 15 of the

Federal Communications Commission (FCC) rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment causes harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by doing one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

ASUS Tablet

• Consult the dealer or an experienced radio/TV technician for

help.

Changes or modications not expressly approved by the party

responsible for compliance could void the user‘s authority to

operate the equipment.

The antenna(s) used for this transmitter must not be co-

located or operating in conjunction with any other antenna or

transmitter.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure

to radio waves. This device is designed and manufactured not

to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of

the U.S. Government.

The exposure standard employs a unit of measurement

known as the Specic Absorption Rate, or SAR. The SAR limit

set by the FCC is 1.6W/kg. Tests for SAR are conducted using

standard operating positions accepted by the FCC with the EUT

transmitting at the specied power level in dierent channels.

The highest SAR value for the device as reported to the FCC is

1.14W/kg when placed next to the body.

Note: The country code selection is for non-US model only

and is not available to all US model. Per FCC regulation, all WiFi

product marketed in US must xed to US operation channels

only.

ASUS Tablet

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003,

RSS-210, and CAN ICES-3(B)/NMB-3(B).

This device complies with Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference

that may cause undesired operation of the device. The IC ID for

this device is 3568A-K013.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below

the Industry Canada (IC) radio frequency exposure limits. The

Wireless Device should be used in such a manner such that

the potential for human contact during normal operation is

minimized.

This device has been evaluated for and shown compliant with

the IC Specic Absorption Rate (“SAR”) limits when installed

in specic host products operated in portable exposure

conditions.

The FCC has granted an Equipment Authorization for this device

with all reported SAR levels evaluated as in compliance with the

FCC RF exposure guidelines. SAR information on this device is

on le with the FCC and can be found under the Display Grant

section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:

MSQK013.

This manual suits for next models

Table of contents

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

DT Research

DT Research DT365CT Basic operation guide