Asus GX-D1051 User manual

English

Quick Start Guide

GX-D1051

GX-D1081

QE4028

10/100/1000Mbps Gigabit Ethernet Switch

2 Quick Start Guide

English

Introduction

Thank you for purchasing the ASUS GX-D1051 / GX-D1081 Gigabit Ethernet

Switch! The GX-D1051 / GX-D1081 feature dedicated 10/100/1000Mbps

connection, auto-negotiation and auto-MDI/MDIX capabilities, and

store-and-forward switching architecture.

Features

• 5 x 10/100/1000Mbps Gigabit Ethernet ports for GX-D1051

• 8 x 10/100/1000Mbps Gigabit Ethernet ports for GX-D1081

• Auto-MDI/MDIX and auto-negotiation on all ports

• Full or half duplex mode at 10/100Mbps transmit speed

• Full duplex mode at 1000Mbps transmit speed

• Full wire speed reception and transmission

• Jumbo frame up to 12KB for GX-D1051 and 16KB for GX-D1081

• 1K for GX-D1051 and 4K for GX-D1081 MAC address with automatic address

learning and aging

• Fanless design for quiet operation

• IEEE802.3xowcontrolinfullduplexmode,backpressureinhalfduplex

mode

• Desktop placement or wall mounting

• Supports ASUS Green Network feature, link down, and cable length detection.

Package contents

Before installing the GX-D1051 / GX-D1081 Switch, check your package for the

following items.

• ASUS GX-D1051 / GX-D1081 Switch x 1

• Power adapter x 1

• Support CD x 1

• Mounting screws x 2; screw size: M3*19mm (B) W-NI 2#

Contact your retailer if any of the items is damaged or missing.

Support VIP port: Port 1 has higher priority over the other ports.

Quick Start Guide 3

English

Technical specications

Data transmission rates 10/100/1000Mbps

Ports 5 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for

GX-D1051

8 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for

GX-D1081

Protocol IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3ab 1000Base-T

IEEE802.3xFullduplexowcontrol

Jumbo frame support: 12KB for GX-D1051, 16KB

for GX-D1081

Performance Bandwidth: 10Gbps for GX-D1051, 16Gbps for

GX-D1081

Forward rate: 14,800 packets/sec. (10Mbps),

148,000 packets/sec. (100Mbps),

1,488,000 packets/sec. (1000Mbps)

Packet buffer memory: 832K bits for GX-D1051,

1M bits for GX-D1081

MAC address table: 1K for GX-D1051,

4K for GX-D1081

Switching mode Store-and-forward

Environmental

specications

Operating temperature: 0ºC-40ºC

Operating humidity: 5%-95% (non-condensing)

Storage temperature: 0ºC-70ºC

LED indicators POWER, Link/Act

Power adapter 12W, DC external: 12V 1A

Dimensions 158mm (L) x 98mm (W) x 30mm (H)

Placement options Desktop placement, wall mounting

Safety & EMI CE, FCC, LVD, C-Tick, VCCI

4 Quick Start Guide

English

Hardware

Front panel

The front panel of GX-D1051 / GX-D1081 includes LED indicators that show

realtime status of the switch.

LED indicators

LED Color Status Description

POWER Green ON The switch is ON.

OFF The switch is OFF.

Link/Act

Green

ON The corresponding port is connected and a

valid link is established at 1000Mbps.

Blinking A valid link is established and data is being

transmitted or received at 1000Mbps.

OFF No valid link is established.

Amber

ON The corresponding port is connected and a

valid link is established at 10/100Mbps.

Blinking A valid link is established and data is being

transmitted or received at 10/100Mbps.

OFF No valid link is established.

GX-D1081 front panel

GX-D1051 front panel

Quick Start Guide 5

English

Rear panel

The rear panel of GX-D1051 / GX-D1081 includes Gigabit Ethernet ports and the

DC IN input port.

GX-D1051 rear panel

DC 12V

5 4 3 2 VIP

DC 12V

8 7 6 5 4 3 2 VIP

GX-D1081 rear panel

6 Quick Start Guide

English

Wall mounting

Mount the switch on a wall with the supplied mounting screws.

To mount the switch on a wall:

1. Secure the two supplied screws into the wall.

2. Latch the hooks of the switch onto the screws.

Placement options

Desktop placement

Puttheswitchonaatandstablesurface.

• DO NOT place any device on top of the switch.

• Leave enough space around the switch for adequate ventilation. Ensure

that the switch is placed in a location that meets the environmental

specications.Seepage3fordetails.

Wall mounting

Bottom Side

Secure two screws on the wall Latch the switch

onto the screws.

117.0mm

18.75mm

2mm

2.95mm

5.3mm

Quick Start Guide 7

English

Connecting to network devices

• Use either cross-over or straight-through cables to connect other

network devices such as PCs, bridges, switches, hubs, and repeaters.

• The length of the network cables should not exceed 100 meters (328 feet).

Connecting to end nodes

The GX-D1051 / GX-D1081 Switch is used as a standalone switch to connect end

nodes such as PCs and printers and form a small workgroup. With auto MDI/MDIX

capability, each Ethernet port on this switch automatically detects the type of cable

plugged to it and adjusts itself to the speed and duplex of the device to which it is

connected.

The Link/Act LED lights green / amber or blinks green / amber when a valid link is

established on the corresponding port.

Connecting to switches or hubs

The Gigabit Ethernet ports on this switch act as uplink ports to connect other

switches or hubs and form a bigger switched network.

The Link/Act LED lights green / amber or blinks green / amber when a valid link is

established on the corresponding port.

Powering on

To power on the GX-D1051 / GX-D1081 Switch:

1. Connect the AC power cord to the AC adapter.

2. Connect the DC output plug on the AC adapter to the DC IN input port on the

rear panel of the switch.

3. Plug the AC power cord into a power outlet.

8 Quick Start Guide

English

This manual suits for next models

Table of contents

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview