Assa Abloy CMD User manual

Original instructions

User Manual

Curved Sliding Door System

ASSA ABLOY CMD

ASSA ABLOY Entrance Systems

ILL-00224

assaabloyentrance.com

CONTENTS - Original instructions

4Instructions for safe operation .......................................................................................................

5Congratulations on your new automatic door! ........................................................................

5Electronic equipment reception interference ...........................................................................

5Environmental requirements ..........................................................................................................

5Product liability ...................................................................................................................................

6Warranty ................................................................................................................................................

6Service .....................................................................................................................................................

7Intended use .........................................................................................................................................

7.........................................................................................................................................

7Technical specification ......................................................................................................................

7How the ASSA ABLOY CMD works .................................................................................................

7Programme selectors .........................................................................................................................

8Programme selector functions .............................................................................

8Locking ....................................................................................................................................................

8Unlocking ...............................................................................................................................................

9Standard safety ....................................................................................................................................

9Microprocessor for precise control ....................................................................

9Safety system with presence sensors ..........................................................................................

10Optional safety .....................................................................................................................................

10Emergency escape ..............................................................................................................................

10Electrical emergency unit .......................................................................................

11Regular safety checks .........................................................................................................................

14Safety accessories ................................................................................................................................

14General accessories ............................................................................................................................

14Cover .............................................................................................................................

14Motion sensor and presence sensors .................................................................

14Programme selectors ...............................................................................................

14Electrical locks ............................................................................................................

14Micro switch kit, LSK/LIS .........................................................................................

14Electrical emergency unit with batteries ..........................................................

14Emergency closing with repeated closing ........................................................

14Mechanical emergency unit with elastic cord ................................................

15Interlocking .................................................................................................................

15Synchronization ........................................................................................................

1006492-en-3.0Issue 2018-03-092

15Convenience battery UPS .......................................................................................

15External error indication .........................................................................................

15Key switches (flush and/or surface mounted) .................................................

15Push button ................................................................................................................

15Emergency open impulse .......................................................................................

15Open / Close function ..............................................................................................

16Troubleshooting ..................................................................................................................................

16Service/Maintenance .........................................................................................................................

17Other products from ASSA ABLOY Entrance Systems ............................................................

ASSA ABLOY as word and logo are trademarks owned by the ASSA ABLOY Group

©ASSA ABLOY Entrance Systems, 2018

Technical data subject to change without notice.

Backtrack information: folder:Workspace Main, version:a448, Date:2018-03-09 time:13:53:09, state: Frozen

3Issue 2018-03-091006492-en-3.0

Instructions for safe operation

•Failure to observe the information in this manual may

result in personal injury or damage to equipment.

•To reduce the risk of injury of persons - use this oper-

ator only with pedestrian doors.

•Do not use the equipment if repair or adjustment is

necessary.

•Disconnect supply when cleaning or other mainten-

ance is to be carried out.

•The operator can be used by children over 8 years of

age if they have been instructed by a person in charge

of their safety.

•The operator can be used by children 8 years of age

or younger if they are supervised by a person respons-

ible for their safety.

•The operator can be used by persons with impaired

physical, sensory or mental capacity if they have been

instructed by a person in charge of their safety.

•Cleaning and user maintenance shall not be made by

children.

•Do not let anyone climb on or play with the door or

the fixed/remote controls.

•The doorset can be operated automatically by sensors

or manually by activators.

1006492-en-3.0Issue 2018-03-094

Congratulations on your new automatic door!

ASSA ABLOY Entrance Systems has developed automatic doors for more than 50 years. State-of-the-

art technology and carefully tested materials and components provide you with a superior product.

As with all other technical products, your automatic door requires periodic maintenance and service.

It is essential that you know your automatic door (system) and that you recognize the importance

of maintaining it in compliance with applicable standards for safety.

Your local ASSA ABLOY Entrance Systems-authorized representative is familiar with these standards,

as well as all applicable local codes and ASSA ABLOY Entrance Systems recommendations for power-

operated pedestrian doors. Service and adjustments performed by your

ASSA ABLOY Entrance Systems-authorized representative, will ensure safe and proper operation of

your automatic door unit.

Electronic equipment reception interference

The equipment may generate and use radio frequency energy and if not installed and used properly,

it may cause interference to radio, television reception or other radio frequency type systems.

If other equipment does not fully comply with immunity requirements interference may occur.

There is no guarantee that interference will not occur in a particular installation. If this equipment

does cause interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•Re-orient the receiving antenna.

•Relocate the receiver with respect to the equipment.

•Move the receiver away from the equipment.

•Plug the receiver into a different outlet so that equipment and receiver are on different branch

circuits.

•Check that protective earth (PE) is connected.

If necessary, the user should consult the dealer or an experienced electronics technician for additional

suggestions.

Environmental requirements

ASSA ABLOY Entrance Systems products are equipped with electronics and may also be equipped

with batteries containing materials which are hazardous to the environment. Disconnect power

before removing electronics and battery and make sure it is disposed of properly according to local

regulations (how and where) as was done with the packaging material.

Product liability

According to regulations, the following are the responsibility of the owner or caretaker of the

equipment

•that the equipment operates correctly, so that it gives sufficient protection in regard to safety

and health

•that the equipment is operated and regularly maintained, inspected and serviced by someone

with documented competence in the equipment and in applicable regulations

•that the provided “Service Log Book”and “Site Acceptance Test and Risk Assessment”documents

(PRA-0005) are kept available for maintenance and service records

•that inspection covers the emergency opening function (when applicable)

•that the closing force is appropriate for the door size on fire-approved door systems (when ap-

plicable)

5Issue 2018-03-091006492-en-3.0

Warranty

ASSA ABLOY Entrance Systems warrants its products to be free from defects in material and work-

manship under intended use and service for a warranty time of 12 months, beginning at time of

delivery. This warranty extends only to the original buyer of the equipment.

ASSA ABLOY Entrance Systems warrants that the software will operate substantially in accordance

with its functional descriptions and that it has been recorded on non-defective media.

The ASSA ABLOY Entrance Systems warranty does not apply to

•That the software will be error-free or operate without interruption

•General wear and tear on the system

•Fuse, disposable batteries and glass damage

•System deviations caused by installer other than ASSA ABLOY Entrance Systems

•System that has been altered or damaged by vandalism or misuse

•System that has been additionally equipped with non-ASSA ABLOY Entrance Systems original

branded parts and/or spare parts

•Unrequired visits due to poor client communication (door working when our technician arrives,

reset, power discontinuation)

•Adjustments (closing and opening speed and also detection field radars) due to customer re-

quests (excludes operational adjustments thought to create a hazard)

•Water damage

•Adverse weather conditions

•Any damage caused, directly or indirectly, by a circumstance beyond the control of the applicable

company within ASSA ABLOY Entrance Systems, such as industrial dispute, fire, natural disaster,

war, extensive military mobilization, insurrection, requisition, seizure, embargo, restrictions in

the use of power and defects or delays in deliveries by sub-contractors caused by any such cir-

cumstances

Please note:

•Non-compliance with manufacturers care and maintenance recommendations may void the

warranty.

•ASSA ABLOY Entrance Systems-authorized resellers shall extend this warranty to end-users only,

but have no authority to extend a greater or different warranty on behalf of

ASSA ABLOY Entrance Systems.

•A service agreement with ASSA ABLOY Entrance Systems will help secure the availability of a

fully operational system and will give priority at call-out, thus minimizing the time that the

equipment is unusable.

Service

Inspections should be done regularly by a trained and qualified person. The frequency of these

inspections should be according to national regulations (or according to industry standard if

there are no national regulations). This is especially important when the installation concerns

a fire-approved door or a door with an emergency-opening function. To extend the life of your

investment and ensure safe and reliable operation of the door, we recommend a minimum

of 2 visits per year or more, depending on usage and operating conditions. Environmental as-

pects shall also be considered.

1006492-en-3.0Issue 2018-03-096

As your entrances are part of your business flow, there’s every reason to keep

them working well. ASSA ABLOY Entrance Systems offers you a maintenance and

modernization expertise to rely on. Our Maintenance Programs and Modernization

Services for entrance automation is backed by a extensive expertise for all types

of pedestrian- and industrial door and docking systems, independent of brand.

At your disposal is a team of dedicated expert technicians, proven through decades

of maintenance, service and satisfied customers.

Intended use

The ASSA ABLOY CMD is an automatic sliding door operator developed to facilitate entrances to

buildings and within buildings.

The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The

system is self-adjusting to the effects caused by normal variations in the weather conditions and to

minor friction changes caused by e.g. dust and dirt.

The ASSA ABLOY CMD sliding door makes it possible to design the entrance in three dimensions,

width, depth and height in addition to the normal width and height. This gives the entrance an elegant

and decorative appearance while it remains extremely functional. A curved sliding door gives a wider

opening than a flat sliding door.

Ensure that the lock is only activated when there are no persons in the room.

For installation and maintenance see Installation and Service manual 1006491.

Save these instructions for future reference.

Technical specification

ASSA ABLOY Entrance Systems ABManufacturer:

Lodjursgatan 10, SE-261 44 Landskrona, SwedenAddress:

ASSA ABLOY CMDType:

120 - 240 V AC 50/60 Hz, mains fuse max 10AMains power supply:

Max. 250 WPower consumption:

IP20Degree of protection:

Third party approvals from established certification organizations valid

for safety in use, see Declaration of Conformity.

Approvals:

How the ASSA ABLOY CMD works

The ASSA ABLOY CMD sliding door system works electromechanically. The drive unit, control unit,

transmission, optional emergency unit and electromechanical locking device are all assembled in a

support beam with an integrated cover. The motor and gear box transmit movement to the door

leaves by means of a tooth belt. The door leaf is fitted to a door adapter/carriage and hangs on a

sliding track. The active leaf travel is directed by a floor guide.

When an opening impulse (e.g. from a motion sensor) is received by the control unit, the drive unit

starts and transmits movement to the door leaves to open.

The closing starts when no OPENING IMPULSE is received, the HOLD OPEN TIME has ended and no

PRESENCE IMPULSE is activated.

Programme selectors

The ASSA ABLOY CMD user can select different modes of operation if a programme selector is installed.

See the table below.

•PSMB-5, for control of one operator only.

7Issue 2018-03-091006492-en-3.0

•PS-5M, for central control of an optional number of operators. In setting AUTO every connected

operator are individually controlled by its own programme selector. Reset is not available on

PS-5M.

•PSK-6U, surface mounted on the side screen or on the wall close to the door.

Programme selector functions

This function is only used on emergency escape doors after it is certain

that all people have left the building.

The door cannot be opened with inner and outer activation units. The

door is locked if an electromechanical locking device has been fitted. The

door can be opened partially with a key switch (if fitted). With an emer-

gency push-button (if fitted) the door opens fully.

OFF

Passage from inside only. The door is normally locked if an electromech-

anical locking device has been fitted. The door can only be opened with

the inner activation unit or with a key switch/emergency push-button (if

fitted).

EXIT

Two-way traffic, normal operation of the door. The door can be opened

with the inner and outer activation units and with a key switch/emergency

push-button (if fitted).

AUTO

Two-way traffic, AUTO PARTIAL is obtained. The door can be opened

partially with the inner and outer activation units and with a key switch

(if fitted). With an emergency push-button the door opens fully.

AUTO

PARTIAL

The door is permanently open. The door can be moved by hand e.g. for

window cleaning. All activation units except for the emergency push

button (if fitted) are disconnected.

OPEN

Set the programme selector to AUTO. Insert a narrow object in the small

hole on the programme selector and push briefly. The operator makes a

system test of the emergency unit (if selected), electromechanical lock,

watchdog relay and closed door position. The operator is after closing

reset and ready for normal operation.

RESET

PSO-5R

PSO-5T

PSMB-5

Note! The RESET is not available on programme selector PS-5M.

Turn the key clockwise to the position “R”(six o’clock) and insert a narrow

object in the small hole on the programme selector and push briefly. Then

turn the key counter-clockwise back to the requested setting. The oper-

ator makes a system test of the emergency unit (if selected), electromech-

anical lock, watchdog relay and closed door position. The operator is after

closing reset and ready for normal operation.

RESET

PSK-6U

Note! The key cannot be removed in the "R" position.

Note! If monitored emergency unit is a demand, a test of the emergency unit is performed when

the programme selector is turned from OFF or OPEN to any other position.

Locking

Doors used for emergency escape in buildings such as hospitals and homes for elderly people may

not be locked or put in programme selection OFF mode. In other buildings emergency escape doors

may be locked or put in programme selection OFF mode after it has been secured and all people

have left the building.

Unlocking

Unlock all the mechanical locks before activating the operator.

1006492-en-3.0Issue 2018-03-098

Note that more than one lock may be fitted.

ILL-00116

assaabloyentrance.com

Standard safety

To permit a safe passage between closing doors, the doors reverse immediately if an obstruction is

detected. They then resume their interrupted movement at low speed to check whether the obstruc-

tion has disappeared or not.

ILL-00209

If an obstruction is detected while the door is opening, the doors stop immediately, and then close

after a time delay.

ILL-00210

Microprocessor for precise control

The microprocessor has a routine for self-monitoring, which detects any interference or faulty signals

in door operation. If an input signal does not correspond to the preprogramming, the microprocessor

automatically takes necessary actions to ensure a safe operation.

Safety system with presence sensors

Usually the safety system incorporates presence sensors installed above the door opening. A presence

sensor detects an object in the doorway, while the doors are closing, the doors reverse immediately.

The doors will start to close when the object is removed.

9Issue 2018-03-091006492-en-3.0

Optional safety

Two or four extra safety presence sensors can be included. The number of extra sensors are depending

on the opening width. The distance between the photocells is 400 mm.

ILL-00247

Emergency escape

The ASSA ABLOY CMD can be combined with an emergency unit that automatically opens or closes¹

the doors in the event of a power failure and can also be interfaced with the fire alarm or smoke

detector. For further information, see General accessories on page 14.

Doors used for emergency escape in buildings such as hospitals and homes for elderly people may

not be locked or put in programme selection OFF.

¹ Electrical emergency unit only

Electrical emergency unit

The door is opened by means of a rechargeable battery unit in the event of a power failure. The door

remains in this position until the power is restored. The operator will then resume the function set

by the programme selector. The emergency unit is monitored by the operator control unit. A mon-

itoring error means that the door opens and remains open until the error is cleared.

For further information, see General accessories on page 14.

The electrical emergency function can also be used to close the door in the event of power failure.

The fire authorities make this a requirement to stop fire or smoke from spreading throughout the

building.

1006492-en-3.0Issue 2018-03-0910

Table of contents

Languages:

Other Assa Abloy Door Opening System manuals

Assa Abloy

Assa Abloy G-CO-FMS User manual

Assa Abloy

Assa Abloy G-CO-C User manual

Assa Abloy

Assa Abloy SW60 User manual

Assa Abloy

Assa Abloy Norton SafeZone 7110SZ Quick guide

Assa Abloy

Assa Abloy Norton 9500 Series User manual

Assa Abloy

Assa Abloy NORTON RIXSON 5200 Series User manual

Assa Abloy

Assa Abloy Crawford MCS-R User manual

Assa Abloy

Assa Abloy Norton LEO 5700 Series User manual

Assa Abloy

Assa Abloy Besam SW300 User manual

Assa Abloy

Assa Abloy Besam VersaMax ICU User manual

Assa Abloy

Assa Abloy Lockwood 724 Series User manual

Assa Abloy

Assa Abloy Sargent 2409 Series User manual

Assa Abloy

Assa Abloy Rockwood OH200 Series User manual

Assa Abloy

Assa Abloy Corbin Russwin PED159 User manual

Assa Abloy

Assa Abloy Norton 6011 Series User manual

Assa Abloy

Assa Abloy Corbin Russwin ED8200A Series User manual

Assa Abloy

Assa Abloy DC3210 User manual

Assa Abloy

Assa Abloy King 70 Series User manual

Assa Abloy

Assa Abloy Norton PR1601 User manual

Assa Abloy

Assa Abloy G-FMS User manual

Assa Abloy

Assa Abloy DC340DA User manual

Assa Abloy

Assa Abloy ABLOY DA401 User manual

Assa Abloy

Assa Abloy RIXSON W50 User manual

Assa Abloy

Assa Abloy Sargent 281 Series User manual

Popular Door Opening System manuals by other brands

Pamex

Pamex KT-INP35 Installation instruction

Label

Label NEPTIS/LE installation manual

Cal-Royal

Cal-Royal N-F77CVR Installation instruction

Scrigno

Scrigno OPEN1000 Assembly manual

TriMark

TriMark UM 34 instructions

BFT

BFT WIND RMB 130B 200 installation manual

Alecto

Alecto ADI-250 user manual

Besam

Besam Swingmaster MP Installation, adjustment and maintenance instructions

CRL

CRL SENIOR PRIMA manual

GAL

GAL MOVFR Quick setup

Olide

Olide 120B installation manual

Normstahl

Normstahl IDO7 installation manual

Häfele

Häfele Finetta T 70 VF manual

AGS

AGS D-PL Instructions for fitting, operating and maintenance

Stanley

Stanley MA900ñ Installation and owner's manual

WITTUR

WITTUR Hydra Plus UD300 Instruction handbook

Alutech

Alutech TR-3019-230E-ICU Assembly and operation manual

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and OPERATING AND INSTALLATION Manual