Assa Abloy ENTR User manual

ii ENTR™ User Manual

Table of Content

1. 5

1.1 Package Content 5

1.2 Tools Required 5

1.3 6

1.4 6

1.5 7

1.6 7

2. 9

2.1 9

2.2 9

2.3 ON/OFF Switch 10

2.3.1 Turning ENTR™ ON 10

2.3.2 Turning ENTR™ OFF 10

2.3.3 10

2.4 11

2.5 Default PIN Code 11

3. 12

3.1 Changing PIN Code 12

3.2 13

3.3 Pairing Remote Control 16

3.4 17

3.5 18

3.6 19

3.7 20

3.8 20

iii

ENTR™ User Manual

4. Touchpad Reader 21

4.1 Changing PIN Code 21

4.2 21

4.2.1 21

5. 22

5.1 22

5.2 Pairing Touchpad Reader 22

5.3 Touchpad Reader Master PIN Code 24

5.4 Menu Mode 24

5.5 Adding PIN Code 24

5.6 Open Door 25

5.7 Lock Door 25

5.8 Delete PIN Code 25

5.9 Delete all PIN Codes 25

5.10 Volume Control 26

5.11 Factory Reset 26

6. Fingerprint Reader 27

6.1 27

6.2 27

6.3 27

6.4 Pairing Fingerprint Reader 28

6.4.1 Add Master 29

6.4.2 Set Finger 29

6.4.3 Set PIN Code 29

6.5 Unlock Door 30

4ENTR™ User Manual

6.6 Lock Door 31

6.7 31

6.8 31

6.9 Add User 32

6.10 Delete User 33

6.11 Enable/Disable User 33

6.12 Delete all Users 34

6.13 Add Time Schedule 34

6.14 Edit Time Schedule 35

6.15 Volume Control 35

6.16 Double Security 36

6.17 Factory Reset 36

7. Smartphone App 37

7.1 37

7.2 Pairing Smartphone 38

8. 39

8.1 39

8.2 40

9. Sabbath Mode 41

10. ENTR™ Wire-free Charger 42

10.1 General 42

10.2 42

10.3 Door Unit Charging 42

11. 43

9.1 43

9.2 Cases 43

Limited Warranty 46

ENTR™ User Manual

1.1 Package Content

1.2 Tools Requirements

• 2mm Allen key

• 3mm Allen key

Baseplate & knob1

Electrical unit2

Cylinder screw3

Panel screw4

charger5

Magnet6

Cylinder7

M5 screw8

6ENTR™ User Manual

• Press & hold the knob (1) and turn slightly (2) the cylinder cam is no longer

protruding from the side of the cylinder body (see

• Insert the cylinder (including baseplate & knob) from the interior side of the door.

• Once the cylinder is correctly aligned within the door, secure the cylinder in place

using the M5 screw.

• Do not over the screw or use power tools to do so.

Note: Do not hammer (or use any other excessive force) on the cylinder or knob when

them into the door.

• Turn the knob back to the zero Knob marks point upwards.

Note: The knob will jump out when returned to zero

Zero

Warning: Do not to operate the unit assembled on the door.

ENTR™ User Manual

• the magnet on the front panel of the door frame, as close as possible to

the lock.

• The top point of the magnet should be approximately 20mm below the M5 screw

(see

• Use the supplied double-sided to adhere magnet.

Note: The magnet area on door frame should be clean and free from dust, peeling

paint etc. If required use alcohol to clean. Wait completely dry prior to

• Insert the key into the external side of the cylinder and turn one full turn.

• Take the key out.

Note: Verify that the gear is not pressed in.

Gear not pressed in

Note: Follow the only if the cylinder was dismantled from the door unit.

Magnet

Door frame

Cylinder screw (M5)

8ENTR™ User Manual

• Assemble the cylinder into the door unit (baseplate & knob).

• Tighten the cylinder's screw.

• Connect the data cable plug.

• Assemble electrical unit as illustrated.

• Tighten the electrical unit's panel screw.

Note: Verify that the cylinder and the knob are

engaged. Press the knob and turn. If the knob can not

be pressed or turned, disassemble the cylinder, adjust

the cylinder's rectangle and reassemble.

• Verify that the rectangle driver (cylinder) aligned with the knob's rectangle bore.

If required, turn the rectangle driver (cylinder) it is in the same (see

below).

Knob back view

• Verify the knob is in zero Knob marks point upwards (see page 6).

screw

Driver

Data cable

Knob back view

ENTR™ User Manual

Error (Red)Door not closed (Red)

OK (Green)Manual mode (Green)Mute (Green)

Knob

Touchpad

ON/OFF switch

10 ENTR™ User Manual

• Turning the ENTR™ lock ON or OFF.

2.3.1 Turning ENTR™ ON

Before turning ENTR™ ON,verify that the door is shut.

• Move the switch to the ON Make sure that

the knob is in the zero (see

• and numeric will blink all once.

• Hazard beep sound will be and error

will blink once.

• ENTR™ is now in mode.

Note:

• turning ENTR™ ON, avoid touching the front

panel beep sound ends.

• turning ENTR™ ON, the door will be shut but

not locked.

2.3.2 Turning ENTR™ OFF

• Move the switch to the OFF

red signal rapidly blinking and 2 long beeps will

be during every lock/unlock

that the is low and needs to be charged.

2.3 ON/OFF Switch

OFFON

•

Zero

Other manuals for ENTR

Table of contents

Other Assa Abloy Door Lock manuals

Assa Abloy

Assa Abloy Corbin Russwin Access 800 Series User manual

Assa Abloy

Assa Abloy effeff 118 Series User manual

Assa Abloy

Assa Abloy 1125 Series User guide

Assa Abloy

Assa Abloy Corbin Russwin CLX3361 User manual

Assa Abloy

Assa Abloy ZI IKON eCLIQ N109 User manual

Assa Abloy

Assa Abloy Code Handle Manual

Assa Abloy

Assa Abloy ABLOY EL587 User manual

Assa Abloy

Assa Abloy Securitron DSB Series User manual

Assa Abloy

Assa Abloy EMTEK LISCIO Troubleshooting guide

Assa Abloy

Assa Abloy eCLIQ User manual

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series User manual

Assa Abloy

Assa Abloy EMTEK Tubular Monolithic Entry Set User manual

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... User manual

Assa Abloy

Assa Abloy Yale Keyfree Connected Smart Lock User manual

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 Series User manual

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... User manual

Assa Abloy

Assa Abloy Valencia AJAX User manual

Assa Abloy

Assa Abloy Hes 5200 Series User manual

Assa Abloy

Assa Abloy 3090 Mounting instructions

Assa Abloy

Assa Abloy Corbin Russwin CLX3300 User manual

Assa Abloy

Assa Abloy SARGENT FM7100 Series User manual

Assa Abloy

Assa Abloy Yale Pro SL Technical specifications

Assa Abloy

Assa Abloy Corbin Russwin Access 800 Series User manual

Assa Abloy

Assa Abloy SARGENT 10X Series User manual

Popular Door Lock manuals by other brands

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Saflok

Saflok Quantum ädesē RFID installation instructions