Aruba Networks AP-93 User manual

AP-90 Series Mounting Kit

Installation Guide

0510737-01 | June 2010 1

The AP-90 Series mounting kit provides a wall mounting option and additional ceiling mounting options

for the AP-90 Series wireless access points (AP). The mounting kit includes the following items:

zWall mounting adapter

zAdapter for 15/16-inch (2.4-cm) ceiling tile rails. Use this adapter to mount the AP on rails that are

recessed above the surface of the ceiling tile

zAdapter for 9/16-inch (1.4 cm) ceiling tile rails. Use this adapter to adapt the integrated mounting

tabs to narrower rails (recessed or flush)

For complete information about selecting the location and setting up the AP, see the AP-92 and AP-93

Wireless Access Point Installation Guide.

Using the Wall Mount Adapter

The AP-90 Series wall mount adapter allows you to securely attach your AP-90 Series access point to a

wall.

1. Begin by attaching the wall mount adapter to the wall as shown in Figure 1.

a. Install any necessary wall anchors. Wall anchors are not included in this kit.

b. Align the screw holes in the mounting bracket with the previously installed anchors or

demarcated screw points.

c. Insert the screws to secure the mounting bracket. Screws are not included in this kit.

Figure 1 Attaching the Adapter to a Wall

2. Insert the necessary cables into the ports on the AP. Optionally, you can route the cables through

the cut-out in the adapter if they are coming from below the AP.

3. Attach the AP to the secured mounting adapter as shown in Figure 2.

a. Align the AP with a mounting adapter, placing the AP so that it’s mounting tabs are at an angle of

approximately 30 degrees to the adapter.

b. Pushing toward the wall, rotate the AP counter-clockwise until it clicks into place (see Figure 2)

AP-90_001

2AP-90 Series Mounting Kit | Installation Guide

Figure 2 Attaching the AP to the Mounting Bracket

Figure 3 Completed Installation

Using the Ceiling Rail Adapter

The AP-90 Series’ enclosure provides integrated mounting tabs that are designed to snap onto a

standard, non-recessed 15/16-inch (1.4 cm) ceiling tile rail; the optional mounting kit is not required for

this installation. The mounting kit includes adapters that allow you to mount the AP-90 Series unit on a

recessed or non-recessed standard 9/16-inch (1.4 cm) rail or on a recessed standard 15/16-inch (1.4 cm)

rail

To attach either ceiling rail adapter to the AP-90 Series AP:

1. Place the adapter against the back of the AP with the adapter at an angle of approximately 30

degrees to the tabs (see Figure 4).

2. Twist the adapter clockwise until it snaps into place in the tabs (see Figure 4).

AP-90_002

AP-90_003

AP-90 Series Mounting Kit | Installation Guide 3

Figure 4 Attaching the Ceiling Mount Adapter

After the adapter is attached to the AP, mount the AP on a ceiling tile rail as follows:

1. Align the AP with a ceiling tile rail, placing the AP so that the mounting tabs on the adapter are at an

angle of approximately 30 degrees to the ceiling tile rail (see Figure 5).

Make sure that slack in connected cables is above the ceiling tiles.

2. Pushing toward the ceiling tile, rotate the AP clockwise until it clicks into place on the ceiling tile rail

(see Figure 5).

Figure 5 Mounting the AP

AP-90_004

AP-90_005

4AP-90 Series Mounting Kit | Installation Guide

Table of contents

Other Aruba Networks Wireless Access Point manuals

Aruba Networks

Aruba Networks IAP-105 User manual

Aruba Networks

Aruba Networks AP-93H User manual

Aruba Networks

Aruba Networks AP-204 User manual

Aruba Networks

Aruba Networks AP-80 MB User manual

Aruba Networks

Aruba Networks AP-210 Series User manual

Aruba Networks

Aruba Networks IAP-200 Series User manual

Aruba Networks

Aruba Networks IAP-103 User manual

Aruba Networks

Aruba Networks AP-200 Series User manual

Aruba Networks

Aruba Networks 175 series User manual

Aruba Networks

Aruba Networks AP-90 Series User manual

Aruba Networks

Aruba Networks AirMesh MST200 User manual

Aruba Networks

Aruba Networks IAP-93 User manual

Aruba Networks

Aruba Networks AP-103 User manual

Aruba Networks

Aruba Networks 277 Series User manual

Aruba Networks

Aruba Networks RAP-5 User manual

Aruba Networks

Aruba Networks Access Point Aruba AP 60/61 User manual

Aruba Networks

Aruba Networks IAP-220 Series User manual

Aruba Networks

Aruba Networks 370 Series User manual

Aruba Networks

Aruba Networks AP-324 User manual

Aruba Networks

Aruba Networks AP-220 Series User manual

Aruba Networks

Aruba Networks RAP-2WG User manual

Aruba Networks

Aruba Networks AP-270 Series User manual

Aruba Networks

Aruba Networks AP-175 User manual

Aruba Networks

Aruba Networks IAP-210 Series User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide