ARTHUR HOLM AH17 NTTHD User manual
AH17 NTTHD
AH19 NTT16
AH22 NTT16
Desktop monitors
User manual
Table of contents
EC REGULATIONS & SECURITY 4
SAFETY INSTRUCTIONS 5
FEATURES 6
BOX CONTENTS 6
CONTROLS 7
OSD MENU 8
INPUT SIGNALS 11
PRODUCT WARRANTY 15
Welcome
Thank you for purchasing an ARTHUR HOLM product.
Our product range has been designed to create the perfect meeting room,
where the screens are a part of the interior design as well as essential
communication tools.
Please, read this installation and operating instructions carefully and keep
them in a safe place for a future consultation.
We remain at your entire disposal if you have any suggestions
that would help us to improve our products.
Henrik Holm
General Manager
4
EC Regulations and Security
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated voltages
inside some of the components, of sufficient magnitude to expose people
to risk of electronic shock.
This symbol draws attention to important use and maintenance instructions
in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
Safety instructions
PLUGS
– Do not dismantle any part of the monitor power connector.
– Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indefinite period of time.
5
Safety instructions
POWER AND EXTENSIONS CORDS
– Use the appropriate power cord with the correct plug type
– Do not overload wall outlets or power cords
– Make sure the total ampere passed through a extension cord does not
exceed the maximum allowed by the cable used
– Do not place anything on the power cord
– Do not locate this product where a person may walk or trip over the cord
Wiring connected to hazardous voltage requires installation by
qualified personnel or the use of ready-made flexible cables.
For your security, your equipment must be connected to an electrical
outlet with grounding connection protection.
The operating electrical outlet must be in an easily accessed place.
ENVIRONMENT
– Install the equipment on an elevated, flat surface
– Install the equipment in a ventilated area
– Avoid exposing the equipment to:
Rain or water
Excessive heat, cold or humidity
Areas exposed to direct sunlight
Dirty areas
Equipment generating strong magnetic fields
– Avoid placing open containers of liquid, near the equipment
– Keep a minimum distance of 30mm in order to have good ventilation
– Never place any sources of flames, such as lighted candles, etc above the
device
– If you are using the device in extreme weather conditions and / or tropical
climates, the equipment should be installed in a room which ensures a
reasonable level of temperature and humidity
– To prevent damage, the equipment must be firmly anchored to the surface
as the installation instructions
6
System Description
FEATURES
- Signal input: DVI-I
- Regulable desktop monitor
BOX CONTENTS
Before the installation of your monitor, please check the contents of the
shipping box, it must contain the following items:
- Monitor
- Power cord
- AC/DC adapter
- User Manual
Use high quality DVI cables with 2m maximum length
7
Controls
OSD MONITOR CONTROL
The OSD buttons, to control or configure the monitor, are located on the
lower body housing of the system
POWER Monitor power on/off
LED Indicates operation status
SOURCE Signal input selection
RIGHT Cursor control right on OSD menu
LEFT Cursor control left on OSD menu
UP Cursor control up on OSD menu
DOWN Cursor control down on OSD menu
SEL Selects the OSD menu function. When the OSD menu is not
active, auto adjust function for ARGB (analogue) input signal
MENU Activate OSD menu. Exits OSD menu when is active
POWER LED SOURCE RIGHT LEFT UP DOWN SELECT MENU
8
OSD menu
ACCESSING THE MENU SYSTEM
– With the OSD off, push the MENU button to activate the main OSD menu
– Press the UP and DOWN button to move from one function to another.
As you move from one icon to another, the function name changes
to reflect the function or group of functions represented by that icon.
Please refer to the following sections below to view a complete list of
all the functions available for the monitor
– Press the OK button to enable the item
– When a function is selected, press the LEFT and RIGHT buttons in order to
change the parameter of the function
Press the Menu button to access to the main menu
PICTURE
CSM Configuration of the image colour
Cool
Normal
Warm
User (manually adjustment of red, green and blue colours)
PSM Configuration of the bright image
Dynamic
Standard
Mild
Game
User (manually adjustment of brightness and contrast)
Contrast Image contrast adjustment
Brightness Image brightness adjustment
9
OSD menu
SCREEN
Input Input signal selection
DVI-A
DVI 1
DVI 2
ARC Aspect image on screen
Full The image is showed on full screen
16:9 Shows the image on screen with 16:9 aspect
Aspect Shows the image on full screen but keeps
the original aspect ratio of the input image
4:3 Shows the image on screen with 4:3 aspect
1:1 Shows the image on screen with the
original resolution
Backlight Adjust the backlight of the screen
Flip Flip the image on screen
Off: Image with no flip
1 Vertical flip
2 Horizontal flip
3 Rotate
OSD-Flip Flip the menu on screen (OSD)
Off Image with no flip
1 Vertical flip
2 Horizontal flip
3 Rotate
10
OSD menu
SETUP
Language OSD language selection
PC Control Adjust the image on screen. Only on ARGB (analogue) input
H-Pos Adjust the image on screen horizontally
V-Pos Adjust the image on screen vertically
Phase Adjust the phase
Clock Adjust the clock
Auto Adjust Auto adjust the image on screen
Reset PC image control reset
1050 Selection of the exact input resolution. Only for ARGB
(analogue) input
1400 x 1050
1680 x 1050
WXGA Selection of the exact input resolution. Only for ARGB
(analogue) input
1024 x 768
1280 x 768
1360 x 768
BG Color Background colour of the screen when there is no input
signal. The monitor only goes to stand by mode when black
colour is selected
BLACK
RED
GREEN
BLUE
This manual suits for next models
2
Table of contents
Other ARTHUR HOLM Monitor manuals
ARTHUR HOLM
ARTHUR HOLM DynamicX2 AH22DX216GA User manual
ARTHUR HOLM
ARTHUR HOLM Dynamic3Talk User manual
ARTHUR HOLM
ARTHUR HOLM AH24DB2 User manual
ARTHUR HOLM
ARTHUR HOLM AH10 DA User manual
ARTHUR HOLM
ARTHUR HOLM Dynamic3Reverse User manual
ARTHUR HOLM
ARTHUR HOLM AH12D1HGA User manual
ARTHUR HOLM
ARTHUR HOLM AH15D3 HDGA User manual
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDGA User manual
ARTHUR HOLM
ARTHUR HOLM AH17D X2HDGA User manual
ARTHUR HOLM
ARTHUR HOLM DynamicX2 AH22DX216DGA User manual
ARTHUR HOLM
ARTHUR HOLM AH1 Series User manual
ARTHUR HOLM
ARTHUR HOLM AH12D 2A User manual
ARTHUR HOLM
ARTHUR HOLM Dynamic 3 User manual
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDA User manual
ARTHUR HOLM
ARTHUR HOLM DB2Share User manual
ARTHUR HOLM
ARTHUR HOLM Gooseneck AH22NTT16 User manual
ARTHUR HOLM
ARTHUR HOLM RISE AH12RI Wide User manual
ARTHUR HOLM
ARTHUR HOLM DB2Share User manual
ARTHUR HOLM
ARTHUR HOLM AH17D1HDA2F User manual
ARTHUR HOLM
ARTHUR HOLM AH12D 216A User manual
