Arenti VBELL 1 User manual
Compatible with Amazon Alexa & Google Assistant
EN Wire-free Battery Powered Video Doorbell
FR Sonnette vidéo à piles sans fil
NL Draadloze video-deurbel op batterijen
ES Timbre con video sin cables a batería
PT Campainha de vídeo alimentada por bateria sem fio
DE Kabellose batteriebetriebene Video-Türklingel
IT Campanello video alimentato a batteria senza fili
RU Беспроводной видеодомофон с питанием от батареи
TU Telsiz Akülü Video Kapı Zili
QUICK GUIDE
VBELL 1
EN
Quick start guide
1. Packing list
2. Product description
3. Installation
4. Product configuration
5. Legal notice
1. Packing list
EN
Camera 1X Power adaptor 1X USB cable 1X
Chime 1X Screws 3X
Warning sticker 1X
Bracket 1X*
Quick guide 1X
Screwdriver 1X
3M sticker 2X
* The bracket is attached to the camera.
2. Product description
1. Microphone
2. Lens
3. PIR
4. Doorbell button
5. Speaker
6. LED indicator
7. SD card slot
8. Reset
9. DC5V USB
10. Device ON/OFF
1. Fix the bracket to the wall with the mounting screws.
2. Install the camera in the bracket and lock it with the screw.
1. LED indicator
2. Speaker
3. Ringtone
4. Volume
5. Function button
6. Micro USB
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is complete.
LED indicator of camera:
Flashing red light (slow)
Flashing red light (fast)
Fixed red light
Fixed blue light
Wait for network config
Connecting the network
Network is malfunctional
Camera is working correctly
3. Installation
Installation with screws
EN
EN
LED indicator of chime:
Flashing red light
Fixed blue light
Wait for pairing
Succeed to pair
EN
EN
1. Lock the bracket to camera with the screw at the bottom.
2. Stick the adhensive tapes to the barcket.
3. Stick the other side of adhensive tapes to the wall.
Installation with 3M stickers
4. Product configuration
Step 1 Turn on your camera.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or
Google Play depending on your device.
Step 4 Launch the App and sign up for the first use.
Step 5 Follow the on-screen instructions to add your
camera.
For more information, scan the QR code.
If you have multiple cameras, please follow step 5 again
to add devices one by one.
To change Wi-Fi network, please restore the camera to
factory settings and follow step 5 to add the camera.
Notice
EN
EN
1. Short press " " (within 2 seconds), the status light flashes
red slowly and the chime will be in pairing mode.
2. Press the doorbell button to pair, when the chime status
light turns off, and the song will play automatically, the
chime pairing is successful at this time.
Description:
1. The chime can connect to maximum eight doorbells.
2. When the chime is in pairing mode, press the " " again
(within 2 seconds), the chime will automatically exit the
pairing mode.
3. After adding the chime successfully, the volume will be
adjusted to the maximum automatically. When it is at the
minimum volume, it will return to the maximum volume
after pressing " ".
4. Each press " ", will play the next song along with blinking
blue light.
During pairing mode, it will blink red
When playing ringtone,it will blink blue
Chime Pairing
Sensor type
Min. brightness
Resolution
Lens
Shutter
Infrared
Infrared distance
FOV
Video compression
Bit rate
Max resolution
Framerate
Picture settings
Storage
Audio
Protocols
WiFi standard
Frequency
WiFi encryption
Security
Working temperature
Power
Consumption
Size(mm)
Battery
Standby consumption
Work consumption
Standby time
Working time
PIR Detection Rangle
PIR Detection Angle
1/2.8" CMOS
Color [email protected]
3 Mega pixels
3.2 mm F2.0
1/25-1/100,000 per second
High power LED with ICR
5 meters
130°
H.264
32Kbps - 2Mbps
2304 x 1296
1-25 per second
Support HD/SD; support flip
SD card (Max 256GB)
Two-way audio
HTTP, DHCP, DNS
IEEE802.11b/g/n
2.4 GHz - 2.4835 GHz
WPA-PSK/WPA2-PSK
AES128
-20℃~50℃
DC5V,1A
4.5W MAX
143x57x36
6700mAh
200µA (average)
220mA (IR off)
10 months
3 months (10 times wake up per day)
7m (Max.)
100°
Specifications
EN
EN
EN
EN
Support
5. Legal notice
www.arenti.com
Symbols
Direct current (DC)
Don't throw batteries or out of order products with
the household waste (garbage). The dangerous
substances that they are likely to include may harm
health or the environment. Make your retailer take
back these products or use the selective collect of
garbage proposed by your city.
Hereby, Arenti, declares that the radio equipment
type ‘VBell 1' is in compliance with the
Directive 2014/53/EU
The full test of the EU declaration of conformity is
available at the following Internet address:
www.arenti.com
For indoor use only
EN
Guide de démarrage rapide
1. Liste de colisage
2. Description du produit
3. Installation
4. Configuration de l'appareil
5. Mention légale
FR
Caméra 1X Adaptateur secteur 1X Câble USB 1X
Carillon 1X Vis 3X
Autocollant
d'avertissement 1X
Support 1X*
Manuel d'utilisation 1X
Tournevis 1X
Autocollant 3M 2X
* Le support est fixé à la caméra.
2. Description du produit
1. Liste de colisag
1. Microphone
2. Lentille
3. PIR
4. Bouton de sonnette
5. Orateur
6. Indicateur LED
7. Fente pour carte SD
8. Réinitialisation
9. USB DC5V
10. Dispositif ON/OFF
1. Indicateur LED
2. Orateur
3. Sonnerie
4. Volume
5. Bouton de fonction
6. Micro USB
Remarquer
Pour réinitialiser l'appareil, maintenez le bouton de
réinitialisation enfoncé pendant 5 secondes.
Caméra émet un bip lorsque l'opération est terminée.
Indicateur LED de la caméra:
Lumière rouge clignotant (lent)
Lumière rouge clignotant (rapide)
Lumière rouge fixe
Lumière bleue fixe
Attendez la configuration du réseau
Connexion au réseau
Le réseau est défectueux
La caméra fonctionne correctement
3. Installation
EN
FR
1. Fixez le support au mur avec les vis de montage.
2. Installez la caméra dans le support et verrouillez-la avec la vis.
Installation avec des vis
Indicateur LED du carillon:
Lumière rouge clignotante
Lumière bleue fixe
Attendez l'appairage
Réussir à jumeler
Other manuals for VBELL 1
3
Table of contents
Languages:
Other Arenti Accessories manuals
