Arcelik WMA 6506 D User manual

WMA 6506 D

WMA 6508 J

WMA 6510 J

FULL AUTOMATIC

WASHING MACHINE

Part 3:

Determining location and installation

Part 4:

Program selection and washing operations.

Part 1:

Steps before operating Fullautomatic

Washing Machine and safety precautions.

Part 6:

Helpful tips on stain removal

Part 2:

Technical features.

Part 5:

Care and Maintanence.

Part 7:

Before calling service.

Dear Customer,

We wish that this product, manufactured at modern facilities with total quality notions, will

deliver you the best performance. In order to guarantee this, please read this instruction

manual thoroughly and keep it for your future reference.

CONTENTS

www.arcelik.com.tr

The current requirement in order for safe operation of this machine is 16 Ampheres. You will need to have a certified

electrician to connect a 16 Amp fuse, if there is not enough current load.

Your washing machine is set to 230 Volts.

Do not forget to check the grounding in all cases of use with or without the transformer. Our company will not be

responsible for any damages caused by operations without grounding.

In order to bring the machine to ready before use, please call your service technician or a certified plummer.

Your washing machine’s front door is designed reversible. To change the front door’s opening direction please call your

service.

Please perform the first wash with detergent and do not place clothing inside your washing machine. This will ensure that

any left over dirt from production will be cleared from inside of your machine.

The performance of the washing machine depends on the effectiveness of the cleaning agent. Stains can be permanent

if low quality detergents are used. Please take necessary effort to clean the stained clothes as described in following

pages before washing them in the machine.

Make sure the on/off switch is in the off position and always allow one to two minutes

for the door safety lock to release the lock. Pull the handle to open the door.

Steps before operating Fullautomatic

Washing Machine and safety precautions

Part 1:

To open the front door

Due to the quality control processes during production, there may be some

water left over in your machine. This does not cause any damage to your

product.

Kick plate

Kick plate opening

screw

Capacity (dry fabric)

Height

Width

Depth

Net weight

Power requirement

Nominal current

Total power

Washing speed

Spin speed (WMA 6506 D)

Spin speed (WMA 6508 J)

Spin speed (WMA 6510 J)

5 kg. (11.1 lbs)

85 cm.

60 cm.

54 cm.

60 kg.

230 V, 50 Hz.

10 A.

2350 Watts.

52 rpm.

600 rpm. (max.)

800 rpm. (max.)

1000 rpm. (max.)

Technical features

Part 2:

The appearance and specifications are subject to

change without notice to raise the unit quality.

The graphics shown in the manual are schematic

and it is possible that they not conform with your

washing machine.

Front door

Top lid

On/Off button

Auxiliary function buttons

Thermostat adjustment knob

Program selection knob

Detergent dispenser

Handle

1. Removing transport safety bolts at the rear of the machine

Determining location and installation

“C”, should be turned in a

anti clockwise direction

until the bolt can be

partially withdrawn.

Part 3:

Attention!

Please keep the safety bolts for future transportationand reinstate them before transporting your machine.

Never transport your machine without the transport bolts in position.

Never place your machine on a carpet. This prevents air circulation. The electrical components of the

machine may overheat and may cause damage.

Remove transport safety bolts

and rubber bushes by pulling

outwards. (A up/down action

and a small squirt of washing up

liquid should ease removal.)

The transport safety bolts must

be removed before any operation

of the machine. Bolt heads,

marked “C”.

Plastic plugs, supplied

inside the protective bag

and designated as “P”,

should be placed in the

safety bolt holes according

to the direction shown.

In order for quiet and stable operation, the machine should be placed properly and leveled on its feet.

Your machine comes with two adjustable feet. If the machine is unstable, loosen the plastic counternut

and screw or unscrew the adjustable foot until the machine is leveled perfectly. After positioning,

tighten the counternut for stability.

Water supply

For proper operation, the pressure of water should be between 1 and 10 atm. (1 atm corresponds to

more than 8 liters per minute flow rate at fully open tap.)

To prevent water leaks sealing washers are supplied with the water inlet hose inside the machine,

place these on each of the hose ends and tighten both ends fully.

In order to prevent any water leak damages, keep the water taps closed when not in use. Connect

the cornered end of the hose to the machine water inlet.

2. Feet adjustment

a) Water inlet hose

3. Water connections

Connect the cold water using the hose with blue printing and connect

the hot water using the hose with red printing.

b) Water drain hose

Water drain hose could be placed either at the side of the bath tub, or

directly to the drain. The hose should not be bent. Water drain hose should

be secured with the elbow so that it would not fall down on the ground.

4. Electrical connection

Connect the power cord to the appropirate electrical

system which is being supported by the maximum

voltage and current rating indicated on the rating

plate placed inside the kick plate.

Look! Page 1, Steps before operating Fullautomatic

Washing Machine and safety precautions.

Make sure that you have

grounded power outlet.

0 10 20 30 40 50 60 70 80

90 100 11

Water drain hose

could be placed

directly to the drain

water inlet.

The hose should be placed between 40 and

100 cm. from the ground.

Attention! Before any operation of the machine check the following.

Did you close the front door?

Is the tap open? Is water drain hose placed properly?

Is power connected?

On/off

switch

Quick

wash

Led indicator

Rinse

hold Temperature

adjustment

knob

Program

selection knob

WMA 6510 J

WMA 6508 J

On/off switch

Quick wash

Led indicator

Rinse hold

Spin speed selection

Temperature

adjustment

knob

Program

selection knob

On/off switch

Led indicator

Detergent drawer

WMA 6506 D

Spin speed selection

Detergent drawer

Control Panel

Choose the appropirate detergent specifically used at the full automatic washing machines. Suggested amount is given on the

detergent cover.

Do not attempt to use detergents and bleaching elements that contain chlor and sulphur. The amount of the detergent depends

on the dirt level of fabric, the amount of fabric and the softness of the water.

Sort the laundry according to the following groups and wash them seperately:

- white and resistant colored fabrics,

- colored fabrics,

- delicate fabrics (silk, rayon etc.),

- wool.

Be sure to empty pockets and remove any belts, buttons, pins, etc. from the clothing. You can place little clothing materials

(baby socks, etc) inside of pillow cases to avoid them slip into the pump and filter. For stained fabrics, refer to the “Practical

information” section of the operating manual.

Sorting laundry

Detergent and softener selection

Loading the machine

Place the fabrics uniformly inside the machine. Hand knits should be placed inside out in the machine. Make sure that there

is no clothing at the side of the door. Close the door by pushing lightly. If the door does not close completely, the machine

could not be started-a safety measure. Front door is locked untill the end of the washing program and it will not be opened

about 2 minutes following the end of the program.

Preparation

Program selection DELICATES

N: Delicate program is used for washing delicate cloths like curtain

or silk fabrics. This program is without prewash and exists of

main wash, 3 rinses and delicate spin. Rinse Hold button can be

selected during the washing program if desired.

WOOLLENS

J: With program selection, which is without pre-wash, wool fabrics

are washed throughly. Main wash, 3 rinses, woollen spin. Rinse

hold button can be selected during the washing program if desired.

K: Delicate spin program. If rinse hold button is not selected during

J program, 600 rpm delicate spin is applied after the wash cycle.

K delicate spin program will be applied if delicate program (N) is

choosen. Similarly woollen spin will be applied if woollen program

(J) is selected.If additional delicate spin is desired, the program

selection knob should be brought to K.

P: If Rinse hold button is selected during the wash programs F,

N, J and spin is not desired, water in the machine can be

discharged by bringing the program selection knob to P.

Rinse

Fabric conditioner

SYNTHETICS

F, H Programs

These programs are designed for synthetic fabrics, naylon clothing,

curtains and iron free wool fabrics. Clothing are washed with more

water delicately.

F: Program with main wash (main wash, 3 rinses; delicate spin)

H: Delicate spin program is applied automatically at the end of F

washing program if the Rinse hold button is not selected. If

additional delicate spin is desired, the program selection knob

should be brought to H.

COTTONS

A, B, C Programs

These programs are used for white and color cotton fabrics.

A: Program with pre-wash (pre-wash, main wash, 3 rinses, spin)

B: Program with main wash (main wash, 3 rinses spin)

C: Spin

Spin program is applied automatically in A and B programs. Should

an extra spin is desired, program selection knob should be brought

to C.

Warning! Before turning the program selection knob you should first turn off the machine, then make your selection,

and then turn on the machine by pushing the on/off button. Before any washing operation, make sure the power

cord is plugged and the tap is on. Also be sure that the discharge hose is placed properly and the front door is

closed.

This manual suits for next models

Table of contents

Other arcelik Washer manuals

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

arcelik WMA 6506 D User manual

Popular Washer manuals by other brands