NOTES & TIPS
Power Switch
12V Input/
3A Output
LED Indicators
LED INDICATORS
There are 5 LED
battery-strength
indicators.
1 or 2 green lights:
Do not run the compres-
sor. Recharge battery
prior to use, or product
application will be com-
promised.
3, 4, or 5
green lights:
Sucient
charge to run
compressor.
CHARGING THE BATTERY Using the wall charger
• Connect the battery to the char-
ger and place the switch on the
battery to the ON position “I”.
• Connect the charger to the wall
outlet. A RED light indicates that
the battery is charging. When
the battery is fully charged, the
GREEN light will illuminate.
• Disconnect the charger, and switch the battery to the o
position “O” until use.
Battery must be in the ON
position when charging.
Using the car charger
Note: the car charger is supplied
with the sprayer kit but not with
replacement batteries. To obtain a
car charger, order ConidioTec part#
30116.
• Connect the battery to the charger
and place the switch on the battery
to the ON position“I”.
• When plugging the car charger into the car socket (with-
out the battery attached), the light will be GREEN.
• When the battery is attached, the charger light should
change to RED.
• When fully charged, the light will illuminate GREEN.
!
Do NOT use the compressor
AC adapter to charge the
battery. Damage to the
battery will occur.
!
• To ensure long battery life do not discharge completely.
• Recharge battery frequently.
• Recharge the battery every 3 months when not in use. Never
leave the battery in the discharged state for long periods.
• All lithium-ion rechargeable batteries are consumables and
have a limited lifespan. Capacity and performance will decline
over time. Contact us for replacement units.
• It’s a good idea to have at least one spare battery and rotate
their use to ensure your consistent work ow.
• The compressor has an auto-o feature: when the gun is
connected via the air hose, the compressor will run to reach
optimum spray pressure, then rest until the trigger button
on the gun is depressed. Battery consumption during au-
to-o rest is minimal. However, always turn the battery o
between jobs to preserve battery life.
• The battery is designed for a slow charge process (8 ~ 10
hours for full charge). An extended, uninterrupted, complete
charge extends battery life.
ON
OFF
