Apogee ONE User manual
QuickStart Guide
support.apogeedigital.com
ONE Quickstart Guide 3
Contents
4Package Contents
5Introducing ONE
6System Requirements
6-14 Getting Started
6Install Apogee Software
7Connect USB
8Choose ONE for Mac sound I/O
8Connect Headphones or Speakers
9Open iTunes and Play
9Adjust Volume
10-11 ConguringanInput
12-13 Set up GarageBand
14 Set the Input Level
14 Record!
Introduction
This QuickStart guide describes how to set up ONE with your Mac, connect speakers
or headphones to play back music with iTunes, and connect mics and instruments
to record your own creations with GarageBand.
ForacompletedescriptionofONEandApogee’sMaestrosoftware,plusadditional
information on how to use ONE with a wide array of hardware and software, please
consultthecompleteUser’sGuide,foundontheincludedsoftwareCD.
Youcanalsondthemostup-to-dateinformationatourwebsite:
http://support.apogeedigital.com
ONE Quickstart Guide
4
support.apogeedigital.com
Package Contents
ONE
USB Cable
QuickStart Guide SoftwareCD
Breakout Cable
ONE Quickstart Guide 5
support.apogeedigital.com
Introducing ONE
Internal
Microphone
Encoder
Breakout Cable Port
Encoder
Function
Indicators
Input/Output
Meter
USB Port
Headphone/
Speaker Out
48V Indicator
ONE Quickstart Guide
6
support.apogeedigital.com
System Requirements
YourMacshouldmeetthefollowingrequirements:
Intel or PPC G5 processor, OS X 10.5.7 or greater
1 GB minimum of installed RAM, 2 GB recommended
Getting Started
Install Apogee Software
InserttheincludedCDintoyourMac,double-clickthe“ONESoftwareInstaller”
icon,andfollowon-screeninstructions.Whentheinstallationiscompleteyou
will be required to restart your Mac.
Please check support.apogeedigital.com for updated ONE software.
ONE Quickstart Guide 7
support.apogeedigital.com
Connect the USB Cable
AfterrestartingyourMac,connectONE’s
(USB) port to a USB port on your Mac
using the provided cable.
As ONE is powered through the USB
connection, the LEDwilllight,
indicating that ONE is now powered on.
ONE Quickstart Guide
8
support.apogeedigital.com
Choose ONE for Mac Sound I/O
After connecting ONE to your Mac,
a dialog box will prompt you to
choose ONE for Mac sound output
and input. Click Yes.
Connect Headphones or Speakers
ConnectheadphonestoONE’sfrontpanel
jack.
It’salsopossibletoconnectapairof
powered speakers to the jack using an
adapter cable. The cable should have an
1/8”stereojacktoconnecttoONEand
two suitable jacks for connection to the
speakers.
ONE Quickstart Guide 9
support.apogeedigital.com
Open iTunes and Play
ToverifyONE’soutput,openiTunes(foundinyourMac’sApplicationsfolder),
choose a selection, and click Play.
Adjust Volume
IfthetoppanelLEDislit,turnthe
encoder clockwise to raise the output
volume. You should now hear the iTunes
selection playing through your headphones
or speakers.
IfanotherEncoderFunctionLEDislit,click
theencoderuntiltheLEDlights,then
turn the encoder.
ONE Quickstart Guide
10
support.apogeedigital.com
Congure ONE’s Input
Connect the supplied breakout cable to
ONE’sbackpanelconnector.
Connect a microphone to the breakout
cable’s (XLR) input
or an instrument to the (1/4”)input.
Other manuals for ONE
5
Table of contents
Other Apogee Accessories manuals
Apogee
Apogee ONE User manual
Apogee
Apogee SQ-421X User manual
Apogee
Apogee ensemble User manual
Apogee
Apogee S2-141 User manual
Apogee
Apogee Apogee Duet User manual
Apogee
Apogee ensemble User manual
Apogee
Apogee SQ-512 User manual
Apogee
Apogee SQ-520 User manual
Apogee
Apogee S2-131-SS User manual
Apogee
Apogee Apogee Duet User manual
Apogee
Apogee Apogee Duet User manual
Apogee
Apogee ensemble User manual
Apogee
Apogee SQ-222 User manual
Apogee
Apogee SQ-618 User manual
Apogee
Apogee SP-214 User manual
Apogee
Apogee SQ Series User manual
Apogee
Apogee SP-522 User manual
Apogee
Apogee SQ-646 User manual
Apogee
Apogee Symphony Mobile User manual
Apogee
Apogee SQ-614 User manual
