Antari F-1 Fazer User manual
1
F-1 Fazer
User Manual
English Français Deutsch • • • 中文
©2018 Antari Lighting and Effects Ltd.
3
User Manual - English
Safety Information
Please read the following safety information carefully before operating the
machine. This information includes important safeguards about installation,
usage, and maintenance. Pay attention to all warning labels and instructions in
this manual and printed on the machine.
If you have questions about how to operate the machine safely, please contact your local
Antari dealer for help.
․Keep this device dry.
․Always connect to a grounded circuit to avoid risk of electrocution.
․Before connecting the machine to power, always check the voltage indicated on
the machine matches your local AC voltage. Do not use the machine if the AC
power voltage does not match.
․Disconnect the machine from AC power before servicing and when not in use.
․This product is for indoor use only! Do not expose to rain or moisture. If fluid is
spilled, disconnect AC power and clean with a damp cloth. If fluid is spilled onto
electronic parts, immediately unplug the machine and contact your local Antari
dealer for advice.
․No user serviceable and modifiable parts inside. Never try to repair this product,
an unauthorized technician may cause damage or malfunction to the machine.
․For adult use only. Never leave the machine running unattended.
․Installed the machine in a well-ventilated area. Provide at least 50 cm space
around the machine.
․Never add flammable liquid of any kind to the machine.
․Make sure there are no flammable materials close to the machine while operating.
4
․Only use Antari fluid. Other fluid may lead to heater clog or malfunction.
․If the machine fails to work, unplug the machine and stop operation immediately.
Contact your local Antari dealer for advice.
․Before transporting the machine, make sure the fluid tank is completely drained.
․Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it
securely. In case of eye contact or if fluid is swallowed, immediately seek medical
advice.
Unpacking and Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to
ensure that all parts are present and have been received in good condition. If any parts
appear damaged or mishandled from shipping, notify the shipper immediately and retain the
packing material for inspection.
What is included: 1 x F-1 Fazer
1 x Power Cord
1 x User Manual
Product Dimensions
275mm
608mm
286mm
5
Product Overview
Both Wireless Remote and Wireless DMX are Optional and not included
Optional Wireless Remote Add On Kit: WTR-10
Optional Wireless DMX Add On Kit: W-DMX-PCBR
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to a suitably rated power supply.To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Blue LCD screen, Timer
mode, Volume mode
Neutrik PowerCon
Breaker
XLR 3-Pin DMX Connector
Wireless Remote / WDMX
Wireless Solution
XLR 5-Pin DMX Connector
Power ON / OFF
6
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues.
Once the machine has reached operating temperature, the display will show Ready to
Faze. Now the machine is ready for operation.
Step 5: To start making haze, press the VOLUME button on the control panel.
Step 6: To turn off the machine, hold the STOP button for 3 seconds; the machine will
automatically run a self-cleaning process and shut off after the process is done.
Operation
Control Panel Operation
The machine can be operated with the onboard digital control interface.
Button
Function
[MENU]
Scroll through setting menu
[UP]/[TIMER]
Up/Activate Timer fucntion
[DOWN]/[VOLUME]
Down/Activate Volume function
[STOP]
Deactivate Timer/Volume function.
Or to select and memorize the setting.
Hold 3 seconds to start self-cleaning process and shut
down the machine
Control Menus
Both the Wireless Remote and W-DMX menu only function when the Optional Wireless
Remote or W-DMX Add On Kits are installed.
Antari F-1
Ready to Faze
7
Set interval time at Timer mode from 5 to 200 seconds
Set duration time at Timer mode from 1 to 200 seconds
Set output volume at Timer mode from 1 to 100 %
Set output volume at Volume mode from 1 to 100 %
Set fan speed from 20 to 100%
Set DMX/W-DMX address from 1 to 511
Turn On/Off Wireless Remote Control function
Turn On/Off Air Pump Sensor
Select DMX mode from 2ch, 1ch, and Sync mode
Turn On/Off W-DMX function
Unlink from a W-DMX transmitter
Interval Set
XXX Sec
Duration Set
XXX Sec
Timer Output
XXX %
Volume Output
XXX %
Fan Speed
XXX %
DMX-512
Address: XXX
W-DMX Power
XX
Wireless
XX
Air Pump Sensor
XX
DMX Mode
XXXX
W-DMX Reset
XXX
8
Turn On/Off run last setting function
Turn On/Off Keypad Sound
DMX Connector Pin Assignment
The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below
indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
DMX Operation
Making the DMX Connection –Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin or 5-pin XLR connector for DMX
connection, the connector is located on the front of the machine.
Run Last Setting
XX
Keypad Sound
XX
9
Address Setup –Use control menu to set DMX address. The machine occupies 2 control
channels. The starting address is defined as the first channel from which the machine will
respond to the controller. Always double check to make sure there are no overlapping
channles in order to control the machine correctly.
DMX Channel Function
Channel Mode
Channel
Value
Function
2
1
0-4
Faze off
5-255
Faze 1-100%
2
0-4
Fan 20%
5-255
Fan 21-100%
1
1
0-4
Faze off
Fan 100%
5-255
Faze 1-100%
Fan 100%
Sync
1
0-4
Faze Off
Fan 20%
5-255
Faze 1-100%
Fan 21-100%
10
Status of W-DMX connection (Optional)
Symbol on the Liquid Crystal Display
Status of W-DMX connection
●
Transmitter assigned, DMX signal received
◎
Transmitter assigned, No DMX signal
⊙
Transmitter link lost or linking to transmitter
○
Transmitter not assigned
Wireless Remote Control Operation (Optional)
The optional wireless remote control system consists of a handheld transmitter and a
receiver on the rear of the machine.
*This menu function is only available when the Optional Wireless Remote Control Add On
Kit is installed:
Turn On/Off Wireless Remote Control function
Optional Wireless Remote Control Add On Kit: WTR-10
*Handheld Transmitter
With the transmitter, it is possible to make haze output via radio signal at maximum
distance of 50 meters. Press the button “A” to produce haze output and press the button “B”
to stop hazing.
Wireless
XX
Other manuals for F-1 Fazer
1
Table of contents
Languages:
Other Antari Fog Machine manuals
Antari
Antari HZ-500 User manual
Antari
Antari Z II Series User manual
Antari
Antari ICE-100 User manual
Antari
Antari F-80ZY User manual
Antari
Antari 20210616 User manual
Antari
Antari HZ-500 Installation instructions
Antari
Antari LCU-2S User manual
Antari
Antari F-4 Fazer User manual
Antari
Antari Z-3000II User manual
Antari
Antari HZ-500 User manual
Antari
Antari W-508 User manual
Antari
Antari FT-100 Fire Training User manual
Antari
Antari M-5 User manual
Antari
Antari SFX-1000 User manual
Antari
Antari Z-1000 III User manual
Antari
Antari M-1 User manual
Antari
Antari Z-1520 RGB User manual
Antari
Antari M-7X User manual
Antari
Antari F-2 Fazer User manual
Antari
Antari Z Series User manual
