Andatech AlcoSense SOBERPOINT 3 User manual
USER’S MANUAL
Andatech®
SOBERPOINT 3
Wall Mounted Breathalyser
2
Thank you for purchasing an Andatech®Soberpoint 3 breathalyser.
The Andatech®Soberpoint 3 is a Fuel Sensor type coin or button-operated
breathalyser. It can help prevent alcohol-related incidents on industrial
sites, in gaming venues, restaurants and bars. The device is easy and
convenient to use, with clear on-screen instructions and indicator lights to
inform users of their BAC level.
We hope you enjoy owning your Andatech®Soberpoint 3 breathalyser. If
you have any questions regarding the unit or want to speak with us further,
please visit andatech.com.au or call 1300 800 200 (between 9am and
5:30pm Monday to Friday).
Components
• LCD display: Displays instructions for use and the test results.
• Bulls eye: This is where the user places the straw to blow into the
machine. The sampling time is 3 seconds.
• Coin Slot / Button: Located on the right side of the machine. The
coin slot only accepts the coin denomination specified. Others are
returned.
• Straw outlet (separate / optional): This is where the straws used
to perform the test emerge from the machine.
• Good / Warning / Danger Light: Illuminates depending on the test
result (refer to page 5).
LCD Display
Coin Slot / Button
Good Light
Warning Light
Danger Light
Bulls Eye
3
Specifications
Indication of BAC 0.000 to 0.250 %BAC
Warm up time Within 30 seconds
Response time Within 6 seconds at 0.100 %BAC
Accuracy ±0.005 %BAC at 0.100 %BAC
Ambient conditions Operation: 5 °C to 40 °C
Storage: 5 °C to 50 °C
Sensor Replaceable fuel cell sensor
Display LCD module
Result Reading Good: Less than 0.02%BAC
(0.00~0.20‰ or 0.00~0.10mg/l)
Warning: 0.02 ~ 0.05%BAC
(0.20~0.50‰ or 0.10~0.20mg/l)
Danger: More than 0.05%BAC
(More than 0.50‰ or 00.25mg/l)
Calibration Unlimited tests, every 6 months
Mouthpieces Cylindrical straw
Power supply AC 110 ~ 220, 50/60 Hz, 1.0A input
DC 12V, 3.0A output
Coin mechanism /
button
Specify denomination of single coin /
Push button to activate
Weight 3.5kg (including DC power supply)
Dimensions (mm) 330 (height) x 255 (width) x 90 (thickness)
4
Set up functions
1. Buzzer
You can turn the buzzer sound on or off by using ‘On’ or ‘Off’.
2. Low Pass Level
The default number can be set from 0.000 to 0.040%BAC.
Test results higher than this setting but lower than "High Pass Level"
will trigger the yellow "Warning" indicator.
3. Hi Pass Level
The default number can be set from 0.050 to 0.100%BAC.
Results above this setting will trigger the red "Danger" indicator. This
should normally be set to the legal driving limit.
Connect power cable
1. Open up the back of the machine.
2. Connect the power cable to power inlet located at
the bottom right (see diagram) of the circuit board.
3. Plug in the power cable to a power source and
switch it on. The machine will start up.
To enter the settings menu, at the top right corner of the circuit board,
press the two buttons labelled “SW1” and “SW2” together at the same
time and hold them down for at least four seconds, then release.
You will see the message “To enter the set up mode”
Setting Up
ON OFF
0.000%BAC
Enter Set Up Mode
SW2
SW2 SW2
SW1
SW1+SW2
SW2S W2
SW2
0.040%BAC0.010 ... 0.030%BAC
0.050%BAC
Exit
0.100%BAC0.060 ... 0.090%BAC
SW2S W2
SW1
SW1
SW1
SW2
5
Operating Instructions
The following instructions will be displayed on the LCD screen.
1. KNOW YOUR LIMIT. CHECK YOUR ALCOHOL LEVEL.
WAIT 10 MINUTES AFTER LAST DRINK BEFORE TESTING.
PUSH BUTTON OR INSERT COIN(S), AND TAKE A STRAW.
2. WARMING UP, PLEASE WAIT ...
3. BLOW STEADILY UNTIL TONE ENDS
If you stop blowing before the tone ends or do not blow hard enough throughout
the test, "Flow Error" will be displayed on the LCD screen.
Please wait until "Blow steadily" message is displayed and try again.
4. SAMPLING IS COMPLETED.
"ANALYZING"
5. The test result is displayed.
When the measurement is complete, the blood alcohol concentration result will
appear on the LCD screen. Then the guide will indicate whether or not you can
drive, aided by the face lamp lights. The message for each level is:
Good
Very little of no alcohol has been detected.
Don't drink and drive!
Warning
A moderate amount of alcohol has been detected.
Don't drink and drive!
Danger
A high level of alcohol has been detected.
Don't drink and drive!
1. Blood alcohol concentration can continue to rise for up to 2 hours after the
cessation of drinking.
2. It can take 10 hours or more for the blood alcohol level to return to zero after a
high blood alcohol level has been reached and in such cases, further test should be
carried out later in the day.
3. During testing, any alcohol traces left in your mouth will increase the value of the
blood alcohol concentration level. Remove these traces before testing. Highest
accuracy is achieved 30 minutes after drinking.
4. Cigarette smoke may also increase the blood alcohol concentration value displayed.
Allow one minute after smoking before testing.
Precautions
6
Materials Needed
1. Soberpoint 3 (Not applicable
for Lite versions)
2. Android phone or tablet
a. Normal
Operation
1. Wifi Status LED 2. Mode Control Switches
a. Top LED solid
green
Device is connected
to the internet and
ready to use.
b. Top and bottom
LED solid green
Device is in setup
mode.
Setup Software for Android Phone
1. On your android device, navigate to
resources.andatech.com.au/software/soberlive-setup-app.apk
2. Download and install the setup software to your android device.
b. Setup
Mode
Soberpoint Component Location
3. Setup software for Android phone
4. Wi-fi router with internet
connection
WIFI Setup
7
Setting Wi-Fi Settings
1. Put the Soberpoint in “Setup Mode”
a. Ensure the Soberpoint is unplugged
and powered down
b. Adjust the “Mode Control Switches”
to the setup mode position (see
component location section)
c. Power on the Soberpoint unit
d. Check status LED’s to ensure
Soberpoint is in Setup Mode
2. Connect Android device to the
Soberpoint
a. Open the Android device Wi-Fi
settings menu
b. Locate and select “LimitedAP” from
the list of available Wi-Fi signals
c. Use password “1234567890” to
complete connection.
d. Write Wi-Fi settings to the
Soberpoint
3. Open setup software on the Android
device
a. Press the connect button
b. AP SSID: Enter the SSID of your
Wi-Fi router
c. AP Security: Enter the security
setting of your Wi-Fi router
d. AP Password: Enter the password of
your Wi-Fi router (Case Sensitive)
8
e. If no password is required, check “None”
f. Device ID: Enter your Soberpoint device ID (See sticker inside
Soberpoint)
g. Device Password: Enter your Soberpoint device PW here (See sticker
inside Soberpoint)
h. Verify all entries are correct
i. Press “Write” button
j. Press “Disconnect” button
4. Restore Soberpoint to normal operation
a. Ensure the Soberpoint is unplugged and powered down
b. Adjust the “Mode Control Switches” to the “Normal Operation”
position (see component location section)
c. Power on the Soberpoint unit
d. Check status LED’s to ensure Soberpoint is in “Normal Operation”
Mode
5. Verify operation
a. Take a breath test with the Soberpoint
b. On your computer, log in to your account at my.andatech.com.au
c. In the same browser, go to hub.andatech.com.au/ui/soberlive
d. Click “View Data” next to the Soberpoint you have set up
e. Your previous test will show
f. If the test is not showing up on the list, ensure that you are logged
in with the correct username (the Soberpoint should show up under
your registered products list). If the test still does not show up,
contact Andatech to address the issue.
6. View uploaded results
a. Follow steps b, c and d from "Verify Operation" above.
9
The product software is easy to maintain and can be changed without any
special skills. It will automatically check and adjust the accuracy rate of
measurement.
SW1. Total Count
SW2. Set the coin number
SW3. Testing mode
1. To check the total amount of tests, press SW1 and the display window will
show the test.
Press SW1 for 2 seconds and the count will be reset to 0, automatically
returning to normal operation mode. Wait a few seconds after testing.
2. When you adjust the number of coins for each test, press SW2 for 2
seconds.
The display window will show “set the coin number”, then press SW2
again. It will allow from 0 to 10 coins per test.
Example: If number 2 is entered, two coins are required. The default
number is set to 1.
This should only be changed for mechanical coin acceptors. For digital
multiple coin acceptors, leave coin number at 1 and program price using
coin mechanism.
Maintenance
10
Replace the sensor only with those provided by the manufacturer.
Please refer to the following diagram and instructions for sensor
replacement:
A. Verify existing settings
Enter menu and document current settings
a. Press SW1 and SW2 simultaneously, hold until setup screen displays
b. Press SW1, document buzzer on/off: _____________________________
c. Press SW1, document low pass setting: __________________________
d. Press SW1, document high pass level: ___________________________
B. Replace sensor
Please refer to the diagram below and the Troubleshooting Section (page
14) for replacement issues.
1. Turn the power off. (Very Important!!)
Replacing Sensors
234
5
Disconnect the unit from the power source.
a.
b.
c.
d.
To Enter Set Up Mode
Exit
Low Pass Level
0.010 %BAC
Buzzer
ON
High Pass Level
0.050 %BAC
Table of contents
Other Andatech Test Equipment manuals
Andatech
Andatech AkcoSense User manual
Andatech
Andatech AlcoSense NEXUS User manual
Andatech
Andatech Sentry User manual
Andatech
Andatech PRODIGY 3 User manual
Andatech
Andatech PRODIGY User manual
Andatech
Andatech Zenith User manual
Andatech
Andatech SOBERLIVE FRX User manual
Andatech
Andatech AlcoSense PRO User manual
Andatech
Andatech SOBERMATE S3 User manual
Andatech
Andatech ALX3000 User manual
Andatech
Andatech Alcosense Zenith Breathalyser User manual
Andatech
Andatech AlcoSense SURETY User manual
Andatech
Andatech DrugSense Orascan User manual
Andatech
Andatech AlcoSense PRODIGY II User manual
Andatech
Andatech SOBERLIVE User manual
Andatech
Andatech SOBERLIVE FR User manual
Andatech
Andatech AlcoSense AccessPoint User manual
