AMP Lighting InfusePro Step Light Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP®InfusePro Step Light

ASL-601X-4-B-BZ

AMP®InfusePro Step Light

ASL-601X-4-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-

age lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Cut Hole

Package Contents

A. (1) Housing

B. (1) Luminaire Cover with

Gasket

C. (2) Lock Screws

Before Starting:

1. Desired location for each luminaire should be determined before

construction of the wall is started.

2. If access to the back of the wall is limited, the cable/conduit should

be run prior to construction.

Open Face Step Light Hooded Step Light Louvered Step Light

8.25”

7” 2.75”

3.25”

3”

3.5”

Using the luminaire housing as a

template, mark the location of the

housing on the wall or deck. Cut

the hole from the mark.

Housing

Hole

Installation in Wall or Stair, Refer to Step 1 to Step 2.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Install Bulb

Install Housing in Wall or Deck

AMP®InfusePro Step Light

ASL-601X-4-B-BZ

Install Housing in Brick Wall

Pass the supply wires through the

cut holes and insert the housing

into the hole. Secure with screws.

Continue from Step 4 to complete

all installations.

Housing

Hole

Screw

Main Low Voltage

Supply Cable

Installation in Brick Wall, Refer to Step 3.

Mortar housing into place as if it

were a brick.

Continue the following steps to

complete all installations.

Housing

Brick

Main Low Voltage

Supply Cable

Insert the bulb with the correct

wattage and type marked on the

luminaire label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle lamp.

Bulb

Socket

[email protected] • 813.978.3900

INSTALLATION & MAINTENANCE GUIDE

AMP®InfusePro Step Light

ASL-601X-4-B-BZ

Install/Replace Bulb

Install Fixture Faceplate with Gasket

Place the luminaire faceplate with

gasket onto housing and secure with

lock screws.

Lock Screw Fixture Faceplate

with Gasket

Housing

Wire Connection

Strip both leads from the luminaire

pigtail. Using two wire connectors

(sold separately), connect the

leads from the luminaire to the

main supply cable leads.

Wire Connectors

Pigtail

Luminaire

Main Low Voltage

Supply Cable

Reverse Step 4 - Step 5 to expose the bulb and replace it with the correct

wattage and type marked on the luminaire label. Reinstall the luminaire

cover.

IMPORTANT: Halogen lamps must be protected from moisture and dust at all

times. Always reinstall luminaire cover when moved.

–6–

www.amplighting.com

–6–

–6––6–

[email protected] • 813.978.3900

–7–

IS-ASL-601X-$-B-BZ.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

This manual suits for next models

Table of contents

Other AMP Lighting Landscape Lighting manuals

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AAL-1012 Series Operating and safety instructions

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting FoundationPro Paver Light Operating and safety instructions

AMP Lighting

AMP Lighting PolynesianPro Operating and safety instructions

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Operating and safety instructions

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Operating and safety instructions

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting 3602 Series Operating and safety instructions

AMP Lighting

AMP Lighting AviatorPro Operating and safety instructions

AMP Lighting

AMP Lighting Sol Top Solar LED Post-Top Light Operating and safety instructions

AMP Lighting

AMP Lighting AFL-4012-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Operating and safety instructions

AMP Lighting

AMP Lighting 3601 Series Operating and safety instructions

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting OrchardPro APL-3018-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Operating and safety instructions

AMP Lighting

AMP Lighting VAL-91 Series Operating and safety instructions

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Operating and safety instructions

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Volt

Volt 2-in-1 Tiki-Brass Torch Light installation instructions

Malibu Boats

Malibu Boats CM110P instructions