American Standard 2050 User manual

T050.111

2050.111

2050.210

6-11/16"

9-1/8"

1-11/16" to 2-1/2"

TRIM KIT for CENTRAL

THERMOSTAT with VOLUME CONTROL

Installation

Instructions

M968417 REV 1.1

Thank you for selecting American-Standard...the benchmark

of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M

ASSE 1016

ROUGHING-IN DIMENSIONS

Recommended Tools

Flat Blade Screwdriver Phillips Screwdriver

Remove as much surface dirt and film using clear

water and soft cotton cloth (as described above).

Use any of the following to remove tough surface

film and build-up:

Mild liquid detergents

Clear ammonia free liquid glass cleaners

Non-acidic, non-abrasive gentle liquid or fully

dissolved powder cleansers mixed according to

manufacturers directions.

Non-abrasive liquid polishers

Once clean, rinse faucet again with clear water to

thoroughly remove cleaner or polish and blot dry with

a soft cotton cloth.

To keep your new faucet looking new, please follow

these simple care instructions:

DO: Simply rinse the faucet clean with clear water.

Dry the faucet with a soft cotton cloth.

DO NOT:

Do not use any abrasive cleaners, cloths, or

paper towels.

Do not use any cleaning agents containing

acids, polish abrasives, or harsh cleaners or

soaps.

Regular and routine cleaning will reduce the need for

heavy cleaning and polishing. If heavy cleaning is

required, the following procedures are recommended:

CARE INSTRUCTIONS:

Failure to follow these care instructions may

damage the Faucet's finish.

FINISHED

WALL

100

TOP/ OPEN

TEMPERATURE CALIBRATION

SET HOT LIMIT STOP

Check that arrow marking B points vertically upwards. If not, push the BLACK

CLAMP (1) on the SECURING RING (2) to the right, pull off KNOB MOUNT (3)

and reinstall KNOB MOUNT (3) with arrow "B" pointing upwards.

For 100 F adjustment, turn the water supply on. Turn KNOB MOUNT (3) until the spout

temperature is 100 F. Check that arrow marking A on the KNOB MOUNT (3) still points

upward after adjusting the thermostat to 100 F. If not, pull out the RED LOCKING DEVICE (5).

Remove KNOB MOUNT (3) without turning by sliding out as indicated by the arrow.

Reinstall the KNOB MOUNT (3) so that the arrow marking A points upwards.

The maximum mixed water temperature is set at 109 F at the factory.

This setting can be changed if desired.

Remove the TEMPERATURE LIMIT STOP (4) (H shaped Black Plastic part).

Reinstall it at the desired notch as indicated in the diagram to limit the maximum

mixed water temperature to 104 F or 112 F.

Reinstall RED LOCKING DEVICE (5).

ARROW

"A"

ARROW

"B"

104

109

112

OPERATING THE VALVE

Push CAPS (1) over the O-RING SEALS (2).

TRIM INSTALLATION

Push on ESCUTCHEON (5) and attach with (60mm)

SCREWS (6) to valve body.

100

If a temperature over 100 F is desired, pull the RED STOP BUTTON (1) away from the body

of the MIXER UNIT and turn the TEMPERATURE KNOB.

If the system is delivering all Hot or all Cold and no mixed water the pipes are probably transposed.

This will increase the mixed water temperature up to the maximum limit previously

selected in step 4.

Push ESCUTCHEON HOLDER (3) with lightly greased

O-RING SEAL (4) over CAP (1).

HANDLE INSTALLATION

Push TEMPERATURE-CONTROL KNOB (1) with the red stop onto KNOB

MOUNT (2). Push RING (3) onto TEMPERATURE-CONTROL KNOB (1) and

attach with SCREW (4).

Push VOLUME-CONTROL KNOB (6) onto HANDLE ADAPTER (8). Push RING (3)

onto VOLUME-CONTROL KNOB (6) and and attach with SCREW (7).

Press on KNOB CAPS (5).

345

Should the hot and cold water supply pipes have been transposed making

adjustment impossible, proceed as follows:

TRANSPOSED SUPPLY PIPING OR BACK TO BACK INSTALLATION

Remove check stops and re-install them transposed.

Shut off water supply.

Remove handle and rim

CHECK STOP

(RED TO BLUE)

Important note: RED CHECK STOP is now on the right of the mixer body and the BLUE

CHECK STOP is now on the left.

Turn the water supply back on and perform the temperature adjustment in step 4.

CHECK STOP

(BLUE TO RED)

M968417 REV 1.1

MODEL NUMBER

CHROME

POLISHED BRASS

SATIN

CHR/POL. BRASS (MIXAGE)

002

099

295

299

Replace the "YYY" with

appropriate finish code

TRIM KIT for CENTRAL

THERMOSTAT

WITH VOLUME CONTROL

T050.111

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1-800 442-1902

Weekdays 8:00 a.m. to 8:00 p.m. EST

IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

Product names listed herein are trademarks of American Standard Inc.

918416-0070A

TEMPERATURE SCREW

909750-YYY0A

HANDLE RING

918428-0070A

VOLUME CONTROL SCREW

907065-YYY0A

HANDLE CAP

909750-YYY0A

HANDLE RING

051313-YYY0A

VOLUME CONTROL

HANDLE

953976-YYY0A

TEMPERATURE

CONTROL HANDLE BASE

953961-0070A

ESCUTCHEON

CARRIER

918378-YYY0A

ESCUTCHEON SCREWS

954026-YYY0A

VOLUME CONTROL HANDLE BASE

953946-YYY0A

ESCUTCHEON

907090-YYY0A

CAP

918327-0070A

ESCUTCHEON

CARRIER SCREWS

060441-YYY0A

TEMPERATURE

CONTROL HANDLE

TOP/ OPEN

M968417 REV 1.1

This manual suits for next models

Other American Standard Thermostat manuals

American Standard

American Standard ACONT600AF11MA User manual

American Standard

American Standard AZON1050AC52ZB User manual

American Standard

American Standard ASYSTAT 340 User manual

American Standard

American Standard ACONT200AN11AA Assembly instructions

American Standard

American Standard asystat 570 User manual

American Standard

American Standard Town Square T555730 User manual

American Standard

American Standard Moments R510 Operating and safety instructions

American Standard

American Standard ACONT800 Series User manual

American Standard

American Standard CERATHERM T050110 User manual

American Standard

American Standard M968983 User manual

American Standard

American Standard Copeland T005740 User manual

American Standard

American Standard ASYSTAT500C User manual

American Standard

American Standard NEXIA Silver 724 Instruction Manual

American Standard

American Standard ACONT802AS32DA User manual

American Standard

American Standard Gold 824 User manual

American Standard

American Standard T010.730 User manual

American Standard

American Standard Enfield T373.730 Operating and safety instructions

American Standard

American Standard ACONT202AS11MA User manual

American Standard

American Standard Ceratherm T050.541 User manual

American Standard

American Standard ACONT203AS42MA User manual

American Standard

American Standard AccuLink Platinum 850 User manual

American Standard

American Standard One T064.740 Operating and safety instructions

American Standard

American Standard Ceratherm T203.730 User manual

American Standard

American Standard Schlage Link AZEMT500BB32MAA Guide

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide