AMATI MC6 User manual
3
11
1
10
7-9
4-6
12-14
15-16
25
26
27
28-29
29
30
31
32
33
34
35
35-36
36-37
38
39-43
16-17
17
18-21
21-24
67
44-45
45-46
46
46
.
89
The Wi-Fi indicator display will not be flashing when
connected to the Wi-Fi Network.
10 11
A programmable thermostat helps make it easy for you to save by offering
four pre-programmed settings to regulate your home's temperature
in both summer and winter - when you are home, asleep, or away.
The pre-programmed settings that come with programmable thermostats
are intended to deliver savings without sacrificing comfort. Depending on
your schedule, you can see significant savings by sticking
with those settings or adjust them as appropriate for your family.
The key is to establish a program that automatically reduces heating and
cooling in your home as your required.
There are two modes in MC6 for user to select: Thermostat mode and Timer
mode.
Benefits of Programmable Thermostats
“ ”
APP Operation 01-07
Please Enable the “Location”to MyHouse App in your mobile settings
before any operation, or else the GEO distance will not correct.
Open the MyHouse and register your account.
Press the Icon on App home screen.
Log into your account.
Press "Location Name" to add the Location, for example
Home/Office etc.
Press icon to confirm the property.
Press icon to go back to the main screen.
Press the icon on App home screen to enter the
"Add Device" screen.
Select "Smart Config" optioin on Add device screen.
Press the bottom button "Add device location to enter WiFi
configuration.
12 13
Find ”Pair to App(Smart Config)“ and press it.
Enter the Wi-Fi password (please ensure this router password must
be correct ).
Press the button"Next" on the bottom to enter "Pairing device"
screen.
Waiting for thermostat feedback on the "Pairing device" screen,
the count down time is 120 seconds, if pairing failed please check
the Wi-Fi password and pair again.
Thermostat Operation
On the MC6 Home scren , press the icon and enter
"Feature Settings".
Wait for the devices to pair,(This may take serveral minutes to
activate).
The App will display "Connected to the Wi-Fi" and will display
"App Matching Success" on the controller .
enter the setting interface.
14 15
The function has a relatively high priority, say, whatever setting you have
made, when you switch the thermostat to Hold mode, all the pre-settings
done before will be temporarily ignored, except hold temperature，which
will maintain until the end of the "hold period" you set.
count down
16 17
When user switches the thermostat to away mode, the thermostat
will still protect itself from frost after the defrost temperature is set.
When temperature is lower than the set defrost temperature,
heating will be turned on, meanwhile, the flame icon will be
displayed on the thermostat.
18 19
Table of contents
Other AMATI Thermostat manuals
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
