Page | 5
1.9 Day Change Time (DEFAULT=00:00): use to select time of the day when the clock should
switch to the next calendar day. DEFAULT is set to midnight. To make changes, press Enter,
select desired Hour using +/-buttons, then press Enter again to confirm.
1.10 Daylight Savings Time (DAYL’T SAV=ON): use to turn ON or OFF Daylight Savings Time. If
ON is selected, the clock will automatically adjust for Daylight Savings Time (begins 2nd Sunday
02:00 A.M in March and ends 1st Sunday 02:00 A.M in November). To make changes, press
Enter, select desired option using +/ -, then press Enter again to confirm
1.11 Setup Pay Cycle(PAY=WEEKLY): press Enter and use +/-to select one of the options below:
PAY=WEEKLY: select this option for weekly pay cycle. You will be able to specify Reset Day
(the day your weekly pay begins) in the next step. Select the Beginning Day of Weekly Pay Cycle
(RDATE = MON): press Enter and use +/-buttons to select SUN, MON, TUE, WED, THU, FRI, or
SAT (the week day your pay period begins). Example: if your weekly pay cycle is Monday through
Sunday, select MON and issue fresh time cards for each Monday of each week. Press Enter to
confirm your selection.
PAY=BI-WEEKLY: select this option for bi-weekly pay cycle. Select the Beginning Date of
your bi-weekly pay cycle (RDATE = SUN JAN 1): press Enter and use +/-buttons to enter Day of
the week (Date and Month) of current month for your Bi-Weekly Pay Cycle beginning date. For
example, your pay cycle started on Monday January 6th and will continue for two weeks ending
on Saturday January 14th. The clock will reset every two weeks from the chosen day. You will
need to issue fresh time cards every two weeks. Press Enter to confirm your day/date selection.
PAY=SEMI-MONTHLY: select this option for semi-monthly pay cycle that lasts half of the
month.
Select the Ending Date for Semi-Monthly pay cycle (EDATE=15th&LAST): press Enter and use +/-
buttons to select one of the following pay cycle options:
1) 16th & 1st: your pay cycle ends on the 16th and on the 1st of each month. Assign fresh time
cards for the 2nd and for the 17th day of each month.
2) 15th & LAST: your pay cycle ends on the 15th and on the last day of the month. Assign fresh
time cards for the 1st and for the 16th day of each month.
3) 14 & LAST-1: your pay cycle ends on the 14th and on 1-Day before the last day of the month
4) 13 & LAST-2: your pay cycle ends on the 13th and on 2-Days before the last day of the month
5) 12 & LAST-3: your pay cycle ends on the 12th and on 3-Days before the last day of the month
6) 11 & Last-4: your pay cycle ends on the 11th and on 4-Days before the last day of the month
7) 10 & Last-5: your pay cycle ends on the 10th and on 5-Days before the last day of the month
After you make your selection, press Enter to confirm and proceed to the next step.
