Alliance Laundry Systems FLW1525C Guide

Installation/Operation

www.comlaundry.com

Frontload Washers

Metered Commercial

FLW1525C

Part No. 802951R3

August 2010

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

NOTA: Para bajar una

copia de estas

instrucciones en

español, visite

www.comlaundry.com.

802951 1

NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all

possible conditions and situations that may occur. It must be understood that common sense, caution, and

carefulness are factors which cannot be built into these washers. These factors MUST BE supplied by the

person(s) installing, maintaining, or operating the washer.

Always contact the distributor, service agent, or the manufacturer about any problems or conditions you do not

understand.

Failure to install, maintain, and/or operate this machine according to the manufacturer's

instructions may result in conditions which can produce bodily injury and/or property

damage. W030

WARNING

means without the expressed written consent of the publisher.

802951

2© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Table of

Contents

Safety Information.............................................................................. 3

Explanation of Safety Messages........................................................... 3

Important Safety Instructions ............................................................... 3

Installation........................................................................................... 5

Dimensions and Specifications............................................................. 5

Before You Start................................................................................... 6

Tools ................................................................................................ 6

Installing the Washer............................................................................ 7

Step 1: Position Washer Near Installation Area .............................. 7

Step 2: Position and Level the Washer............................................ 7

Step 3: Connect Fill Hoses............................................................... 8

Step 4: (Non-Gravity Drain Models Only)

Connect Drain Hose to Drain Receptacle....................................... 10

Step 5: (Gravity Drain Models Only)

Connect Drain Outlet to Drain System........................................... 11

Step 6: Remove the Shock Sleeves and Shipping Brace ................. 12

Step 7: Wipe Out Inside of Wash Drum.......................................... 12

Step 8: (Supply Injection Models Only)

Connect External Supplies to Washer............................................ 12

Control Function Test ...................................................................... 13

Step 9: Plug In the Washer............................................................... 14

Step 10: Check Installation.............................................................. 15

Operation............................................................................................. 16

Operation Instructions .......................................................................... 16

Step 1: Load Laundry....................................................................... 16

Step 2: Close Loading Door............................................................. 16

Step 3: Add Laundry Supplies......................................................... 17

Step 4: Set Fabric Selector............................................................... 17

Step 5: Set Wash Temperature......................................................... 17

Step 6: Set Soil Level....................................................................... 18

Step 7: Insert Coin(s) or Card.......................................................... 18

Step 8: Start Washer......................................................................... 18

Indicator Lights................................................................................ 19

Maintenance........................................................................................ 20

User-Maintenance Instructions............................................................. 20

Lubrication....................................................................................... 20

Cold Weather Care........................................................................... 20

Care of Your Washer ....................................................................... 20

Cleaning Glass Sealing Area ........................................................... 20

Replacing Hoses............................................................................... 20

Filter Screens ................................................................................... 20

Vacations and Extended Non-Use................................................... 20

Reinstallation of Shipping Materials ............................................... 21

Cleaning Foreign Object Trap ......................................................... 21

Troubleshooting.................................................................................. 22

Contact Information........................................................................... 24

Installer Checklist................................................................ Back Cover

802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Safety Information

Explanation of Safety Messages

Throughout this manual and on machine decals, you

will find precautionary statements (“DANGER,”

“WARNING,” and “CAUTION”) followed by specific

instructions. These precautions are intended for the

personal safety of the operator, user, servicer, and

those maintaining the machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

Important Safety Instructions

(Save These Instructions)

1. Read all instructions before using the washer.

2. Refer to the GROUNDING INSTRUCTIONS in

the INSTALLATION manual for the proper

grounding of the washer.

3. Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry-cleaning solvents, or other

flammable or explosive substances as they give

off vapors that could ignite or explode.

4. Do not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washing machine or combination washer-dryer,

turn on all hot water faucets and let the water

flow from each for several minutes. This will

release any accumulated hydrogen gas. The gas

is flammable, do not smoke or use an open flame

during this time.

6. Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children. This is a safety

rule for all appliances.

7. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

8. Do not reach into the washer if the wash drum is

moving.

9. Do not install or store the washer where it will be

exposed to water and/or weather.

10. Do not tamper with the controls.

Indicates an imminently hazardous

situation that, if not avoided, will cause

severe personal injury or death.

DANGER

Indicates a hazardous situation that, if not

avoided, could cause severe personal

injury or death.

WARNING

Indicates a hazardous situation that, if not

avoided, may cause minor or moderate

personal injury or property damage.

CAUTION

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions: W023

WARNING

Safety Information

802951

4© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11. Do not repair or replace any part of the washer, or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that you understand and have the

skills to carry out.

12. To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to

connect the washer to the electrical power

source.

13. Use your washer only for its intended purpose,

washing clothes.

14. ALWAYS disconnect the washer from electrical

supply before attempting any service. Disconnect

the power cord by grasping the plug, not the cord.

15. Install the washer according to the

INSTALLATION INSTRUCTIONS. All

connections for water, drain, electrical power and

grounding must comply with local codes and be

made by licensed personnel when required. Do

not do it yourself unless you know how!

16. To reduce the risk of fire, clothes which have

traces of any flammable substances such as

vegetable oil, cooking oil, machine oil,

flammable chemicals, thinner, etc. or anything

containing wax or chemicals such as in mops and

cleaning cloths, must not be put into the washer.

These flammable substances may cause the

fabric to catch on fire by itself.

17. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

18. Keep your washer in good condition. Bumpingor

dropping the washer can damage safety features.

If this occurs, have your washer checked by a

qualified service person.

19. If the supply cord is damaged, it must be replaced

by a special cord or assembly available from the

manufacturer or its service agent.

20. Be sure water connections have a shut-off valve

and that fill hose connections are tight. CLOSE

the shut-off valves at the end of each wash day.

21. Loading door MUST BE CLOSED any time the

washer is to fill, tumble or spin. DO NOT bypass

the loading door switch by permitting the washer

to operate with the loading door open.

22. Always read and follow manufacturer’s

instructions on packages of laundry and cleaning

aids. Heed all warnings or precautions. To reduce

the risk of poisoning or chemical burns, keep

them out of the reach of children at all times

(preferably in a locked cabinet).

23. Always follow the fabric care instructions

supplied by the garment manufacturer.

24. Never operate the washer with any guards and/or

panels removed.

25. DO NOT operate the washer with missing or

broken parts.

26. DO NOT bypass any safety devices.

27. Failure to install, maintain, and/or operate this

washer according to the manufacturer’s

instructions may result in conditions which can

produce bodily injury and/or property damage.

NOTE: The WARNING and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining, or operating the washer.

Always contact your dealer, distributor, service agent

or the manufacturer about any problems or conditions

you do not understand.

802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Installation

Dimensions and Specifications

FLW2258N

2 in.

(5.1 cm)

42.25 in. (107.2 cm)

Stainless Steel Models

Through Serial No. 1005018719

43 in. (109.2 cm) All Other Models

29.6 in. (75.1 cm)

28 in. (71.1 cm)

24 in.

(61.0 cm)

26.9 in. (68.3 cm)

31.1 in. (79 cm)

2 in.

(5.1 cm)

36.94 in. (93.83 cm)

14.6 in.

(37.08 cm)

13.1 in.

(33.3 cm)

MODELS EQUIPPED WITH DRAIN HOSE

1.5 in.

(3.8 cm)

FLW2259N

11.5 in. (3.81 cm) Inside Diameter

1.86 in. (4.72 cm) Outside Diameter

FLW2259N

2 in.

(5.1 cm)

29.6 in. (75.1 cm)

28 in. (71.1 cm)

24 in.

(61.0 cm)

26.9 in. (68.3 cm)

31.1 in. (79 cm)

4.1 in.

(10.41 cm)

36.94 in. (93.83 cm)

14.6 in.

(37.08 cm)

13.1 in.

(33.3 cm)

MODELS WITH GRAVITY DRAIN

4.2 in.

(10.67 cm) 1

1.5 in.

(3.8 cm)

42.25 in. (107.2 cm)

Stainless Steel Models

Through Serial No. 1005018719

43 in. (109.2 cm) All Other Models

Installation

802951

6© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Before You Start

Tools

For most installations, the basic tools you will need

are:

Figure 1

NOTE: An 8 in. (20.32 cm) coin drawer is required

for coin operated models.

NOTE: If the washer is delivered on a cold day

(below freezing), or is stored in an unheated room

or area during the cold months, do not attempt to

operate it until the washer has had a chance to

warm up.

NOTE: Install dryer before washer. This allows

room for attaching exhaust duct.

NOTE: Some moisture in the wash drum is normal.

Water is used during testing at the manufacturer.

D074I

1Wrench

2Screwdriver

3Pliers

4Socket Wrench

5Level

123

Installation

802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Installing the Washer

Step 1: Position Washer Near Installation

Area

Move washer so that it is within 4 feet (1.2 meters) of

the desired area of installation.

NOTE: For best performance and to minimize

vibration or movement, install washer on a solid,

sturdy and level floor. Some floors may need to be

reinforced, especially on a second floor or over a

basement. Do not install the washer on carpeting,

soft tile, a platform or other weakly supported

structures.

Figure 2

Step 2: Position and Level the Washer

Position washer so it has sufficient clearance for

installation and servicing.

NOTE: Use of the dispenser drawer or washer door

as a handle in the transportation of the washer may

cause damage to the dispenser or door.

Place washer in position on a solid, sturdy and level

floor. Installing the washer on any type of carpeting,

soft tile, a platform or other weakly supported

structures is not recommended.

Place a level on the cabinet top and check if the

washer is level from side to side and front to back.

NOTE: Level must rest on raised portion of top

panel. Refer to Figure 3.

If washer is not level, tilt washer to access the front

and rear leveling legs. For easier access to leveling

legs, prop up washer with a wooden block. Refer to

Figure 3. Loosen 7/8 in. locknut and adjust legs until

the washer is level from side to side and front to back

(using a level). Washer should not rock.

Tighten the locknuts securely against the washer

base using the 7/8 in. wrench. If the locknuts are not

tight, washer will move out of position during

operation.

H054I

+,($

Washers elevated above floor level must

be anchored to that elevated surface,

base or platform. The material used to

elevate the washer should also be

anchored to the floor to ensure that the

washer will not walk or that the washer

can not be physically pulled, tipped or

slid from its installed position. Failure to

do so may result in conditions which can

produce serious injury, death and/or

property damage. W306

WARNING

Installation

802951

8© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

NOTE: DO NOT slide washer across floor if the

leveling legs have been extended, as legs and base

could become damaged.

Remove rubber feet from accessories bag and place on

all four leveling legs.

Verify that unit doesn’t rock.

Figure 3

Step 3: Connect Fill Hoses

Water Supply

Water supply faucets must fit standard 3/4 inch

(19.1 mm) female garden hose couplings. DO NOT

USE SLIP-ON OR CLAMP-ON CONNECTIONS.

Water supply faucets should be readily accessible to

permit turning them off when washer is not being

used.

Recommended cold water temperature is 60° to 80°

Fahrenheit (16° to 27 Celsius). Recommended

maximum hot water temperature is 125° Fahrenheit

(51°Celsius). Warm water is a mixture of hot and cold

water. Warm water temperature is dependent upon

water temperature and pressure of both the hot and

cold water supply lines.

Water pressure must be a minimum of 20 to a

maximum of 120 pounds per square inch (138 to 827

kPa) static pressure measured at the faucet.

NOTE: Water pressure under 20 pounds per

square inch (138 kPa) will cause an extended fill

time in the washer and may not properly flush out

the detergent dispenser.

FLW2114N

1Leveling Leg

2Washer Base

3Level

4Wood Block

5Locknut

6Rubber Foot

FLW2114N

Under certain conditions, hydrogen gas

may be produced in a hot water system

that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If

the hot water system has not been used

for such a period and before using the

washer, turn on all hot water faucets and

let the water flow from each for several

minutes. This will release any

accumulated hydrogen gas. The gas is

flammable. Do not smoke or use an open

flame during this time. W029

WARNING

To prevent personal injury, avoid contact

with inlet water temperatures higher than

125°Fahrenheit (51°Celsius) and hot

surfaces. W748

WARNING

Table of contents

Other Alliance Laundry Systems Washer manuals

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TV2000WN User manual

Alliance Laundry Systems

Alliance Laundry Systems LTS95A*N User manual

Alliance Laundry Systems

Alliance Laundry Systems Home Laundry Automatic Washer User manual

Alliance Laundry Systems

Alliance Laundry Systems UWH045K1L User manual

Alliance Laundry Systems

Alliance Laundry Systems HWNLX2SP111CW01 Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems CHM160C Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems BF35PV Maintenance and service guide

Alliance Laundry Systems

Alliance Laundry Systems NX18BVPA6 Guide

Alliance Laundry Systems

Alliance Laundry Systems Cabinet Hardmount SC27SN Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems LTS87A*H User manual

Alliance Laundry Systems

Alliance Laundry Systems TLW12C SVG User manual

Alliance Laundry Systems

Alliance Laundry Systems TLW22C SVG User manual

Alliance Laundry Systems

Alliance Laundry Systems AWNA11SP111TW01 Programming manual

Alliance Laundry Systems

Alliance Laundry Systems HF18VCV User manual

Alliance Laundry Systems

Alliance Laundry Systems FTS90A*N User manual

Alliance Laundry Systems

Alliance Laundry Systems 802715 User manual

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TLW24C-SVG1 User manual

Alliance Laundry Systems

Alliance Laundry Systems SA025L Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems TLW12C_SVG Guide

Alliance Laundry Systems

Alliance Laundry Systems 805413R1 Guide

Alliance Laundry Systems

Alliance Laundry Systems A Series Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems H3 User manual

Alliance Laundry Systems

Alliance Laundry Systems LWS16M series User manual

Alliance Laundry Systems

Alliance Laundry Systems LWS49N Series User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide