ALEXA H259964 User manual
2
Step 1: Check the contents of your box
1.1 Your tree will come in various combinations depending on
the size. (Figure 1)
1.2 A metal tree stand with 3 eyebolts. (Figure 2)
1.3 Control box and power cord with adaptor. (Figure 3)
1.4 “Ornament” with voice activated command list. (Figure 4)
1.5 Number of spare bulbs for each: 4 (5ft) /6 (6.5ft) /10 (7 ft)
/12 (9 ft) (Figure 5). These can be found in the poly bag
attached to the end of the light strand inside the tree.
5 ft 6.5 & 7.5 & 9 ft
Figure 1
Figure 2 Figure 3 Figure 4 Figure 5
3
Step 2: Stand Assembly ( Figure 6 ~ 8 )
Place the stand in your desired location as once the tree is fully assembled it may be too difficult to move and
relocate.
2.1 Open the tree stand to form an “X”. (Figure 6 and Figure 7)
2.2 Align the threaded holes to insert each eyebolt. Make only a few clockwise turns leaving room to insert bottom
section. (Figure 8)
Figure 6 Figure 7 Figure 8
4
Step 3-A Tree Assembly (Figure 9 ~ 11)
3.1 Locate the bottom section (B or C depending on
tree size) and insert into the top of tree stand.
(Figure 9).
3.2 Fully tighten the 3 pins into place. Secure the tree
base firmly to the tree stand. (Figure 10).
3.3 Insert the remaining section (A or B+A depending
on tree size) in the proper order. (Figure 11)
Figure 9 Figure 10 Figure 11
IMPORTANT TREE SET UP TIPS:
1. Shake the tree well after assembly to
ensure the branches are extended.
2. Some shaping of the tree may be
required for best appearance.
3. Spare bulbs are included in a small
bag inside the tree. Remove from the
tree and keep in case replacement is
needed.
5
Step 3-B Extend all branches and twigs and shape until the tree looks full.
Before After
6
Step 4: Connect Controller and AC Power Adapter (Figure 12).
Attach the power cord with adaptor to the control box, plug the adaptor into an AC power source.
Figure 12
7
Step 5: Connect to Alexa
1. Download the “Amazon Alexa” application from the app store on your mobile device .
2. Install and open the “Amazon Alexa” application.
3. Go to the settings menu.
4. Select “Add Device”
5. Select “Christmas Tree” and follow the on-screen instructions.
6. To set up a second tree, select “Second Christmas Tree” and follow the on-screen instructions. Alexa will ask for
clarification if a command does not target a specific tree.
Barcode Scanning & Location (Figure 13)
Note that during device setup you may be asked to
scan a device barcode. You can find this on the
back of the controller, shown in Figure 13. Figure 13
8
Step 6-A: Change your Christmas Tree LED lighting Mode using Alexa
Follow the voice commands for a list of functions to achieve up to 55 lighting functions. (Figure 14)
Color options
Command – “Set Christmas tree to” :
1. White
2. Red
3. Green
4. Yellow
5. Blue
6. Purple
7. Light blue
8. Starlight
9. Multi Color
Light functions
Command – “Set Christmas tree to” :
A. Steady
B. Fade
C. Flip
D. Sparkle
E. Twinkle
F. Trio
Brightness Settings
Command – “Set Christmas tree to” :
I. High
II. Medium
III.Low
Figure 14
9
Step 6-B: Manually change your Christmas Tree LED lighting mode
Push Button on Control Box to switch Christmas Tree LED Light Mode.
There are a total of 55 lighting modes:
10. White Fade
11. Red Fade
12. Green Fade
13. Yellow Fade
14. Blue Fade
15. Purple Fade
16. Light Blue Fade
17. Starlight Fade
18. Multi Color Fade
00. Power Off
01. White Steady
02. Red Steady
03. Green Steady
04. Yellow Steady
05. Blue Steady
06. Purple Steady
07. Light Blue Steady
08. Starlight Steady
09. Multi Color Steady
10
Demo Mode:
The Demo
mode will start and play all 54
lighting functions every 8
seconds.
28. White Sparkle
29. Red Sparkle
30. Green Sparkle
31. Yellow Sparkle
32. Blue Sparkle
33. Purple Sparkle
34. Light Blue Sparkle
35. Starlight Sparkle
36. Multi Color Sparkle
37. White Twinkle
38. Red Twinkle
39. Green Twinkle
40. Yellow Twinkle
41. Blue Twinkle
42. Purple Twinkle
43. Light Blue Twinkle
44. Starlight Twinkle
45. Multi Color Twinkle
19. White Flip
20. Red Flip
21. Green Flip
22. Yellow Flip
23. Blue Flip
24. Light Blue Flip
25. Purple Flip
26. Starlight Flip
27. Multi Color Flip
46. White Trio
47. Red Trio
48. Green Trio
49. Blue Trio
50. Yellow Trio
51. Light Blue Trio
52. Purple Trio
53. Starlight Trio
54. Multi Color Trio
55. Demo Mode
Step 6-B: Manually change your Christmas Tree LED lighting mode (cont'd)
This manual suits for next models
15
Table of contents
