AL Tech AE-L-FLIS-150 User manual
"
Specifications
Model Number
AE-L-FLIS-150
DLC #
U-IFL-150
DLC Partner
Ultron Industries
Input Wattage
150W
Replacement Wattage
600W MH
Input Voltage Range
100-277V
Delivered Lumens
18000 lm
Lumen Efficiency
120 lm/w
Color Rendering Index (CRI)
70+
Color Temperature (Kelvin)
3000K-5700K
Beam Angle
120°
Power Factor
0.99
Frequency
50/60Hz
MAX THD (%)
15
Min. Ambient Temp
-30.0°F / -34.4℃
Max. Ambient Temp
130.0°F / 48.9℃
IP Rating
IP65
Dimming Compatible
3 in 1 dimming function (1˜10Vdc or PWM signal or resistance)
Product Weight
16.5LB / 7.5KG
Product Height
2.4In / 60mm
Product Length
16.9in / 430mm
Product Width
11.6in / 295mm
Lens
Glass
Materials
Die Cast Aluminum
Finish
Black (Default)
LM70 Life Time
100,000 Hours
UL/cUL
E481056
DesignLights Consortium®
YES
CE
YES
FCC
YES
Warranty
5 Years
Dimensions - 150W
User Guide
Note:
Please read this entire manual to fully understand and safely use this fixture. The
products can be used at the voltage of 100-277V AC, 50/60HZ, suitable for indoor and
outdoor, moisture proof and dust proof applications. Specifications are subject to
change without notice. Please visit www.altechefficiency.com for the most recent
product information.
Unpacking:
1. Unpack and carefully examine the product to make sure all of the materials are
included.
2. if any part(s) were damaged during shipping, please contact us immediately and
save all packing materials
3. DO NOT ATTEMPT TO USE THE FIXTURE IF IT IS DAMAGED IN ANY WAY.
Before You install:
1. Before installing any light fixtures, carefully read and understand all of the installation
instructions and product labels as well as all advisories and warnings. Failure to do
so can result in injury and/or void the warranty.
2. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE PROPER
INSTALLATION OF ALL FIXTURES.
3. The product should be installed and operated in accordance with ALL relevant local
codes.
4. There is risk of electric shock. Ensure that main power source is off when wiring any
fixtures.
Maintenance:
1. Disconnect the product from the power supply prior to cleaning.
2. Use a dry or slightly moistened cloth for cleaning.
3. Never use any chemicals or abrasive materials on fixture or components.
Installation Instructions:
1. Connect the input and ground wires of the fixture to the power supply. Brown is live. Blue
is neutral. Green/Yellow is ground.
2. Secure the fixture to the mounting box with appropriate hardware.
3. Adjust fixture light direction.
4. This fixture is designed for years with minimum care. For optimum performance, periodically
clean the lens with a mild, non abrasive glass cleaner and soft cloth. DO NOT use solvents
or cleaners containing abrasive agents. When cleaning the fixture, make sure you have the
power turned off and do not spray liquid cleaner directly onto the LED chips, board or wiring
This manual suits for next models
1
Other AL Tech Floodlight manuals
