Akuvox R23X User manual

R23X Door Phone User Manual
WWW.ACTIVEONLINE.COM.AU 1300 816 742

About This Manual
Thank you for choosing Akuvox’s products. In user manual, we provides all functions and
configurations you want to know about R23X. Please verify the packaging content and
network status before setting. This manual applies to firmware 26.0.0.96 or lower version.
Note: The old firmware may be a little different from 26.0.0.96 about some configuration.
Please consult your administrator for more information.

Content
1. Overview..................................................................................................1
1.1. Product Description.............................................................................................................1
1.2. Feature................................................................................................................................. 3
1.3. Panel Description.................................................................................................................4
2. Configuration...........................................................................................5
2.1. Web login............................................................................................................................. 5
2.1.1 Obtain the IP address.................................................................................................5
2.1.2 Login the web.............................................................................................................5
2.2. Status....................................................................................................................................6
2.2.1 Basic............................................................................................................................6
2.3. Intercom...............................................................................................................................7
2.3.1 Basic............................................................................................................................7
2.3.2 LED Setting................................................................................................................. 8
2.3.3 Relay&Input................................................................................................................9
2.3.4 AEC Setting............................................................................................................... 11
2.3.5 Multicast...................................................................................................................12
2.3.6 Card Setting(R23C only)........................................................................................... 13
2.4. Account.............................................................................................................................. 14
2.4.1 Basic..........................................................................................................................14
2.4.2 Account-Advanced................................................................................................... 16
2.5. Network............................................................................................................................. 19
2.5.1 Basic..........................................................................................................................19
2.5.2 Advance....................................................................................................................20
2.6. Phone................................................................................................................................. 22
2.6.1 Time/Lang.................................................................................................................22
2.6.2 Call Feature.............................................................................................................. 23
2.6.3 Voice.........................................................................................................................24
2.6.4 Phone-Multicast.......................................................................................................25
2.6.5 Phone-Call Log..........................................................................................................26
2.7. Upgrade..............................................................................................................................27
2.7.1 Basic..........................................................................................................................27
2.7.2 Advance....................................................................................................................28
2.8. Security.............................................................................................................................. 30
2.8.1 Basic..........................................................................................................................30

1
1.Overview
1.1. Product Description
R23C R23P
Akuvox's Audio Doorphone R23X is an open, non-proprietary and IP-based door
station for two-way communication and remote entry control. It is a perfect
complement to any SIP system and offers new possibilities of effectively control entry
to your premises.It’s applicable in villas, office and so on.

2
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum value.
Before a new product is a available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the FCC,
tests for each phone are performed in positions and locations as required by the FCC.
For headset, this part has been tested and meets the FCC RF exposure guidelines
when used with an accessory designated for this product or when used with an
accessory that contains no metal.
For baseband, this equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment .This equipment should be installed and operated
with minimum distance 20cm between the radiator& your body.

3
1.2. Feature
Highlight
Vandal resistant body, with a flush button
POE(IEEE802.3af, Power-over-Ethernet)
Two-way audio communication over IP network with Echo cancel feature
Complied with SIP Standard for easy integration in each SIP PBXes
Physical&Power
Body material: all-aluminum
Button: 1 call button
Output Relay: 2 output relays for door opener
802.3af Power-Over-Ethernet
12 DC connector(if not using POE)
RF Card Reader:13.56MHz Supported (R23C only)
Power consumption: less than 12w
Water proof&Dust proof: IP65
Installation: Wall-mounted
Dimension: 190x110x35mm
SIP Endpoint
SIP v1(RFC2543), SIP v2(RFC3261)
Audio codecs: G.711a, G.711μ, G.722, G.729
Speech Quality: 7kHz Audio
Echo Cancellation
Voice Activation Detection
Comfort Noise Generator
Door opened via DTMF post-dial

4
Network Features
1x10/100Mbps Ethernet Port
Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP,
ICMP, DHCP, ARP
Application Scenarios
Office door phone with on-site or hosted IP-PBX
Remote site entry over Internet
Villa intercom with door access control
1.3. Panel Description
R23C R23P

5
2.Configuration
2.1. Web login
2.1.1 Obtain the IP address
The Akuvox R23X uses Static IP by default, the default IP address is 192.168.1.100. If
the IP address is unknown, press and hold the call button for a short period of
time(about 5s) after LED light turns blue, the phone will announce its IP.
2.1.2 Login the web
Open a Web Browser, enter the corresponding IP address. Then, type the default
user name and password as below to log in:
User name: admin
Password: admin

6
2.2. Status
2.2.1 Basic
Status can be viewed from “Status -> Basic”,including the information of product,
network and account.
Sections
Description
Product Information
To display the device’s information such as Model name,
MAC address (IP device’s physical address), Firmware version
and Hardware version.
Network Information
To display the device’s Networking status(LAN Port),such as
Port Type(which could be DHCP/Static/PPPoE), Link Status, IP
Address, Subnet Mask, Gateway, Primary DNS server,
Secondary DNS server, Primary NTP server and Secondary
NTP server(NTP server is used to synchronize time from
INTERNET automatically).
Account Information
To display device’s Account information and Registration
status (account’s username, registered server’s address,
Register result).

7
2.3. Intercom
2.3.1 Basic
Go to the path: Intercom-Basic
Sections
Description
Basic
Select Account: R23X supports 2 accounts. You can
choose one account or Auto mode for the following
Intercom basic settings.
No Answer Call :R23X will call to the No answer call
number in order when the ringtone is time out without
answer of the push button number. Disable by default.
Push Button
Push Button: To configure the destination number or IP
you want to contact with.
No Answer Call 1&2: To setup two no answer call
numbers or one no answer call number.
Web Call
To dial out or answer the phone from website.
Table of contents
Other Akuvox Intercom System manuals

Akuvox
Akuvox E21 Series User manual

Akuvox
Akuvox C313X User manual

Akuvox
Akuvox R29 Series User manual

Akuvox
Akuvox R20A Manual

Akuvox
Akuvox R26B User manual

Akuvox
Akuvox IT83W Manual

Akuvox
Akuvox R27A User manual

Akuvox
Akuvox R26X User manual

Akuvox
Akuvox E18 User manual

Akuvox
Akuvox C319 Series User manual

Akuvox
Akuvox R20A Manual

Akuvox
Akuvox E16 Series Service manual

Akuvox
Akuvox R29C-L Assembly instructions

Akuvox
Akuvox C312 Series User manual

Akuvox
Akuvox R29 Series Manual

Akuvox
Akuvox E18C Service manual

Akuvox
Akuvox R29C Assembly instructions

Akuvox
Akuvox C312X User manual

Akuvox
Akuvox C317A User manual

Akuvox
Akuvox A01X User manual





















