Akaso Keychain User manual
USER MANUAL
AKASO Keychain Camera
V1
What's in the Box
Your Keychain Camera
Getting Started
Standalone Use
Download the AKASO GO App
Connecting to the App
Customizing Your Keychain Camera in the “AKASO GO” App
Accessories Introduction
Updating Your Camera’s Software
Q&A
Contact Us
1
2
3
4
5
5
7
11
12
12
13
CONTENTS
WHAT'S IN THE BOX
AKASO Keychain
Camera * 1
Type-C Charging
Cable * 1
Easy Clip * 1
Pivot Stand and Pivot
Stand Base * 1
Carry-on Camera
Case * 1
Magnet Base * 1
Quick Start Guide * 1
Quick Start Guide
1
YOUR KEYCHAIN CAMERA
Fill Light Charging Indicator,
Power On/Off,
Wi-Fi On/Off
Status Indicator,
Fill Light On/Off,
Quick Capture
Video On/Off
Lens
Microphone
MicroSD Card Slot
Reset Button
Type-C Port
2
GETTING STARTED
1. CHARGING THE BATTERY
To make the most of your new camera, we recommend fully charging the battery
before first use.
2. INSERTING/REMOVING MICROSD CARDS
• Insert the card (not included) at a downward angle with the label facing down.
• To remove the card, press it into the slot with your fingernail and it will pop out.
Step1: Open the door.
Step2: Charge the battery using the USB-C cable included.
Note: The battery cannot be removed from the camera.
The camera status light turns red during charging. When charging with a computer,
be sure that the computer is connected to a power source. If the camera status light
does not turn on, use a different USB port.
3
Please use brand name memory cards that meet these requirements:
• microSD, microSDHC or microSDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note: Handle memory cards with care. Avoid contact with liquids, dust, and debris.
As a precaution, power off the camera before inserting or removing the card.
Check manufacturer guidelines regarding use in acceptable temperature ranges.
STANDALONE USE
Power On/Off
Press and hold the Power on/off Button for at least 2 seconds to power on/off the
Keychain camera, indicated by two short vibrations and a blue status indicator.
Tips: If you turn on auto shut down (1/3/5 Mins) and your Keychain camera stays in
standby mode for over 1/3/5 Mins, it will shut down automatically.
Fill Light On/Off
Firstly make sure the camera is on, press and hold the Fill Light button for at least
2 seconds to turn on or turn off the fill light.
Power On/Off
Wifi On/Off
Fill Light On/Off
Quick Capture
Video On/Off
4
The AKASO GO app is available on the App Store© and Google Play™.
DOWNLOAD THE AKASO GO APP
The AKASO GO app lets you control your camera remotely using a smartphone or
tablet.
Features include camera control, live preview, playback, download, and settings.
① Turn on the camera. Press the Power button to turn on Wifi on the camera.
② Turn on Wifi on your phone, select the Wifi named SNKCXXXX and enter the
password: 1234567890 on your smartphone WLAN setting.
③ Open the AKASO GO app. Tap the “+” icon on the upper right corner.
Add “KeyChain” and click the “Live Preview”.
CONNECTING TO THE APP
Quick Capture On/Off
Firstly make sure the camera is on. Press the Quick Capture button and you will see
the blue indicator flash showing that your Keychain camera has started video
capture. Press again to stop capturing the video.
Tips: Default setting is Normal Video. The camera will also remember the video
shooting mode you selected in the app last time.
AKASO GO
5
6
④Having successfully connected to your Keychain, you can capture photos or
videos via the app.
1. Video Setup
CUSTOMIZING YOUR KEYCHAIN CAMERA IN THE “AKASO GO” APP
Video Setting
Record Video
Loop Recording
Slow Motion Video
Time-Lapse Video
4k30fps, 2.7k30fps, 2.7k60fps, 1080P60fps,
1080P30fps, 720P120fps, 720P60fps
4k30fps, 2.7k30fps, 2.7k60fps, 1080P60fps,
1080P30fps, 720P120fps, 720P60fps
4k30fps, 2.7k30fps, 2.7k60fps, 1080P60fps,
1080P30fps, 720P120fps, 720P60fps
1080P60fps, 720P120fps, 720P60fps
Video Resolution
Video/Photo
Toggle Button
Playback Full-Screen
Shutter Button
Video/Photo Setting
Setting
7
Note: The interface for default Video mode shown here is for illustrative purposes
only.
• Record Video
Default setting is Record Video. Press the Shutter button and the camera will record
a slow motion video.
Note: When capturing videos in high resolution or high frame rate in warm ambient
temperatures, the camera may become warm and use more power.
• Loop Recording
Loop recording time:1 Min/3 Min/5 Min
Default setting is 1 Min.
Loop recording allows your camera to overwrite old files with new files. Once the
microSD card becomes full, the camera will delete the first video file to make room
for the latest file. For example, if the setting for loop recording is “1 Minute”, then
the camera will create video clips of 1 minute in length. A 1 minute clip will be
deleted when memory is full.
• Time-Lapse Video
Time Lapse: 1 Sec/3 Sec/5 Sec/10 Sec/30 Sec/1 Min
Default setting is 1 Sec.
In Time Lapse Video mode, press the Shutter button and the camera will record a
video from frames captured at specific intervals.
Note: Time Lapse Video is captured without audio.
• Slow Motion Video
In Slow Motion Video mode, press the shutter button and the camera will record a
slow motion video.
• Wind Noise Reduction: Off/On
Default setting is Off.
Turn on Wind Noise Reduction to lower noise as required.
8
Other manuals for Keychain
1
This manual suits for next models
1
Table of contents
Other Akaso Action Camera manuals
Akaso
Akaso Brave 7 User manual
Akaso
Akaso V50 Pro SE User manual
Akaso
Akaso V50 Pro SE User manual
Akaso
Akaso Brave 8 User manual
Akaso
Akaso EK7000 User manual
Akaso
Akaso V50 Elite User manual
Akaso
Akaso BRAVE 4 PRO User manual
Akaso
Akaso Brave 4 User manual
Akaso
Akaso EK7000 User manual
Akaso
Akaso EK7000 Pro User manual
