AireRyder FN75539 Technical manual

INSTRUCTIONS FOR INSTALLATION AND USE

Ceiling Fan Model Ursa (FN75539/FN75537)

BEFORE YOU START

Proper use:

-This product is intended exclusively for non-commercial use as ceiling fan.

-The product has to be installed and used in accordance with these instructions.

-Any use of this product that is not in accordance with these instructions will void the

legal warranty of the manufacturer.

Please keep the original carton and packaging material as the warranty will only be honored if

product is returned in complete original packaging.

FOR YOUR OWN SAFETY

General safety instructions:

-For the safe use of this product, you need to have read and understood these instructions

before installing or using the product.

-Please follow all safety instructions! If you ignore these safety instructions, you will endanger

yourself and others.

-Keep these instructions for future reference.

-All parts of this product have to be installed properly in order to ensure safe operation.

-Modification of the product and use of non-approved parts are prohibited.

-This product is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning the use of the product by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the product.

Electrical safety:

-The electrical installation must be performed by a qualified electrician and must be in

accordance with national and local regulations.

-Use a fault-current circuit breaker with a rated residual current of no more than 30 mA.

-Make sure to install an all-pole disconnection switch having a contact separation of at least

3mm between poles in the supply wiring to the ceiling fan.

-Before connecting the appliance to the electrical grid, make sure that it will only be

operated within the specified parameters.

-The fan must be properly grounded to avoid the risk of electric shocks.

-Switch off the power before connecting, repairing or cleaning the fan.

-Install only bulbs of the type intended for your fan.

Storage and transport:

-Always store the fan in a dry environment.

-Protect the fan from damages during transport.

F A N

C O

171117

Safety instructions specific to this fan:

- Attach the fan only directly to ceiling structure.

- The carrying capacity of the ceiling structure from which the fan is hung must be at least

three times the weight of the fan.

- The minimum distance between the blades of the fan and the floor must be 2.3m.

- Never mount the fan outside or in a humid or wet enviroment. The fan can not be

installed within proximity of water (e.g bath tub, swimming pool, water connection).

- The fan can be installed on ceilings with a slope of up to 23 degrees.

- Switch off the power before connecting, replairing or cleaning the fan.

- The rotor area has to be kept clear of any objects at all times.

- Be careful when working near the rotating blades.

FAN OVERVIEW

1. Canopy

2. Downrod

Motor Housing

Fan Blade

5. Fan Light

UNPACK THE FAN

- Unpack the fan and check that contents of packaging are complete.

- Dispose of packaging –see also “Disposal”.

Contents of packaging:

Instructions for installation and use

Fan Blades (5 PCS)

Hanger Bracket

Motor Housing

Canopy

Fan Light

Downrod Set (Includes Ball Joint, 6”

Assembly Kit

Downrod, Hanger Pin & Lock Pin)

Downrod Stand Cover

Remote Control

Note: In case of damage or missing parts, please contact your retailer.

INSTALLATION

Risk of electric shock: Switch off the electricity using the switch at the circuit breaker box

before installing the fan.

Risk of electric shock: The electrical installation must be performed by a qualfied electrcian and

must be in accordance with national and local regulations.

Risk of injury:In case you need to drill holes for mounting the fan, make sure that the drills

have sufficient distance to in-ceiling wiring.

F A N

C O

171117

Fig.1

Turn off the electric circuit at the

main fuse or circuit breaker box.

Hanger

Bracket

Flat Washer

Spring Washer

Guide Pin

Fig.2

Attach the hanger bracket to the ceiling

with spring washers, flat washers and 2

mounting screws.

Note: For sloped ceiling installation, make

sure that the hanger bracket is installed so

that the guide pin is facing upward.

Fig.3

Fig.4

Fig.5

Housing Screw

Screw Plate

Top Housing

Motor Wires

Top Housing

Blade Screw W/

Rubber Washer

Collar Screw

Center Band

Blade

Slot

Remove the Hanger Ball screw, then

slide the Hanger Ball downwards.

Remove three Housing Screws and two

Collar Screws. Take care not to drop the

screws or washers into the fan housing. Push

the Screw Plate and the Top Housing upward,

and slide them down the Motor Wiring until

they are out of the way.

Insert the Blade through the slot on the Center

Band. Align holes and fasten Blade to the motor

with Blade Screws and rubber washers. Repeat

for remaining Blades. After all Blades are

fastened securely to the motor, restore the Top

Housing and Screw Plate onto the motor and

fasten it with the three Housing Screws.

Fig.6 Support Pin

Ball Joint

Screw

Lock Pin

Hanger Pin

Slide the support pin out. Remove the

Ground Wire screw. Remove the

Lock Pin and take off the Hanger Pin.

Remove the Hanger Ball.

Fig.7

Downrod

Motor Wires

Thread the Motor Wires through the

Downrod.

Fig.8

Downrod

Collar

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

F A N

C O

171117

1. Make house wire connections. Follow diagram on the right and make sure that all exposed wires are

tightened by screw on terminal block.

Note:

a.) The terminal block shown in right graph is pre-installed on the mounting bracket.

b.) After wiring is completed, gently push wires into hanger bracket with terminal block facing upward (if applicable).

2. a.) Slide receiver through hanger bracket as shown.

b.) Plug the male connection of receiver wires into the female connector of motor wires.

c.) Insert the infra-red sensor into the hole on the canopy

d.) Make fixture wire connection. Plug the male connector into female connector and plug the male

terminal into female terminal.(Do not force it into wrong receptacle as it will cause damage.)

F A N

C O

171117

Fig.16

Fig.15

Fig.17

Fig.15

AAA

Battery

Push the Glass

1. Install the battery (AAA) to the transmitter.

2. OPERATING TRANSMITTER:

* Press "HI" to turn on the fan at high speed.

* Press "MED" button to turn the fan in medium speed.

* Press "LOW" button to turn the fan in low speed.

* Press "OFF" button to turn off the fan.

* Press and release the "ON/OFF" button quickly to turn

on or turn off the light.

* Press and hold the "DIMMER" button to dim or brighten lights

to the desired level and release.

Battery Cover

F A N

C O

171117

CLEANING

Risk of injury: Before cleaning the fan, always switch off the power at the main circuit breaker and wait until

the fan has come to a complete stop.

Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.

DISPOSAL

Disposal of the fan: You are required to dispose of electric and electronic appliances separately from your

household waste. Please inquire at your municipality regarding proper ways of disposal.

By separately disposing of your electric and electronic appliances, you are participating in recycling and you are

helping to prevent potentially toxic substances from polluting the environment.

Disposal of the packaging: The packaging consists of cardboard and marked plastic and Styrofoam which can be

recycled. Please recycle.

MALFUNCTIONS –TROUBLE SHOOTING

Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a hazard for

yourself and your environment.

Please check the following table before contacting your retailer.

Malfunction

Underlying cause (error)

Solution

Fan does not turn.

Fan switched off?

Switch on fan.

No mains voltage?

Check circuit breaker.

Wiring connected incorrectly?

Check step 5 to ensure wiring

connected correctly.

Fan vibrates.

Fan not installed properly?

Install fan thoroughly according to

installation instructions.

Light does not work.

Lamp defective?

Exchange lamp.

If you can not resolve the malfunction yourself, please ask your retailer directly.

Please note that the warranty will be voided by inappropriate repairs.

MANUFACTURER

Vaxcel International Co., Ltd.

121 E North Avenue, Carol Stream, IL, USA

www.vaxcel.com

F A N

C O

171117

This manual suits for next models

Table of contents

Other aireRyder Fan manuals

aireRyder

aireRyder F0003 User manual

aireRyder

aireRyder FN66636 User manual

aireRyder

aireRyder FN52317 User manual

aireRyder

aireRyder F0061 User manual

aireRyder

aireRyder FN44322 User manual

aireRyder

aireRyder F0069 User manual

aireRyder

aireRyder FN52307 User manual

aireRyder

aireRyder F0028 User manual

aireRyder

aireRyder Zephyr User manual

aireRyder

aireRyder F0050 User manual

aireRyder

aireRyder FN433 series User manual

aireRyder

aireRyder F0049 User manual

aireRyder

aireRyder Cyrus User manual

aireRyder

aireRyder FN52265 User manual

aireRyder

aireRyder F0063 User manual

aireRyder

aireRyder FN72238 User manual

aireRyder

aireRyder FN73335 User manual

aireRyder

aireRyder eFan FN4113 Series User manual

aireRyder

aireRyder F0018 User manual

aireRyder

aireRyder F0029 User manual

aireRyder

aireRyder FN44417 User manual

aireRyder

aireRyder F0048 Instruction Manual

aireRyder

aireRyder Cosmos User manual

aireRyder

aireRyder FN52998 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

aireRyder FN75539 Technical manual

Popular Fan manuals by other brands