AireRyder Cyrus User manual

INSTRUCTIONS FOR INSTALLATION AND USE

Ceiling Fan Model Cyrus (FN44444)

BEFORE YOU START

Proper use:

-This product is intended exclusively for non-commercial use as ceiling fan.

-The product has to be installed and used in accordance with these instructions.

-Any use of this product that is not in accordance with these instructions will void the legal

warranty of the manufacturer.

Please keep the original carton and packaging material as the warranty will only be honored if product

is returned in complete original packaging.

FOR YOUR OWN SAFETY

General safety instructions:

-For the safe use of this product, you need to have read and understood these instructions

before installing or using the product.

-Please follow all safety instructions! If you ignore these safety instructions, you will endanger

yourself and others.

-Keep these instructions for future reference.

-All parts of this product have to be installed properly in order to ensure safe operation.

-Modification of the product and use of non-approved parts are prohibited.

-This product is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning the use of the product by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the product.

Electrical safety:

-The electrical installation must be performed by a qualified electrician and must be in

accordance with national and local regulations.

-Use a fault-current circuit breaker with a rated residual current of no more than 30 mA.

-Make sure to install an all-pole disconnection switch having a contact separation of at least

3mm between poles in the supply wiring to the ceiling fan.

-Before connecting the appliance to the electrical grid, make sure that it will only be operated

within the specified parameters.

-The fan must be properly grounded to avoid the risk of electric shocks.

-Switch off the power before connecting, repairing or cleaning the fan.

-Install only bulbs of the type intended for your fan.

Storage and transport:

-Always store the fan in a dry environment.

-Protect the fan from damages during transport.

F A N C O

161031

Safety instructions specific tothis fan:

-Attach the fan only directly toceiling structure.

-The carrying capacity of the ceiling structure from which the fan is hung must be at least three

times the weight of the fan.

-The minimum distance between the blades of the fan and the floor must be 2.3m.

-Never mount the fan outside or in a humid or wet enviroment. The fan can not be installed

within proximity of water (e.g bath tub, swimming pool, water connection).

- The fan can be installed with downrod mount or slope ceiling mount (up to 23 degrees).

-Switch off the power before connecting, replairing or cleaning the fan.

-The rotor area has to be kept clear of any objects at all times.

-Be careful when working near the rotating blades.

FAN OVERVIEW

UNPACK THE FAN

INSTALLATION

Contents of packaging:

Instructions for installation and use

Canopy

Hanger Bracket

Downrod Set (Includes Ball Joint, 4”

Downrod, Hanger Pin & Lock Pin)

Risk of electric shock:

1. Canopy

2. Downrod

3. Motor Housing

4. Fan Blade

5. Fan Switch Box

6. Fan Light

Note: Incase of damage or missing parts, please contact your retailer.

Switch off the electricity using the switch at the circuit breaker box before

installing the fan.

Risk of electric shock:

The electrical installation must be performed by a qualfied electrcian and must

be in accordance with national and local regulations.

Risk ofinjury:

In case you need to drill holes for mounting the fan, make sure that the drills have

sufficient distance to in-ceiling wiring.

-Unpack the fan and check that contents of packaging are complete.

-Dispose of packaging – see also “Disposal”.

F A N C O

161031

Downrod Stand Cover

Blade Brackets (3 PCS)

Fan Blades (3 PCS)

Motor Housing

Switch Box Cover

Fan Light

Assembly Kit

Suction Cup

Pull Chains

Fig.1

Turn off the electric circuit at the

main fuse or circuit breaker box.

Thread the motor wires through the

downrod stand cover, canopy and

downrod.Then restore support pin

and downball back by tightening

screw.

Hanger Pin

Lock Pin

Screw

Support Pin

Ball Joint

Hang the fan on hanger bracket,

and make sure the slot of ball joint

is fitted into the guide pin of hanger

bracket.

Remove the lock pin and take off

the hanger pin.Then remove screw

and slide the ball joint down to take

off support pin.

Fig.3

Insert and tighten the two collar

screws. Slide lock pin into hanger

pin.

Fig.6

Lock Pin

Collar Screws Slot

Guide Pin

Hanger Bracket

Fig.7

Loosen the collar screws partly.

Insert the downrod into the collar.

Slide hanger pin through holes of

collar and downrod and secure with

lock pin.

Hanger Pin

Motor Wires

Downrod

Downrod Stand

Cover

Collar

Canopy

Fig.5

Motor Wires

Downrod

Downrod Stand

Cover

Canopy

Fig.4

Attach the hanger bracket to the ceiling

with spring washers, flat washers and 2

mounting screws.

Note: For sloped ceiling installation, make

sure that the hanger bracket is installed

so that the guide pin is facing upward.

Hanger

Bracket

Fig.2

Guide Pin

Flat Washer

Spring Washer

From House Wire

Terminal Block

House Wire

(AC-L)

L(AC-N)

Female Connector

Female Terminal

Male Connector

Male Terminal

Fig.8 1. Make house wire connections. Follow diagram on

the left and make sure that all exposed wires are

tightened by screw on terminal block.

Note:

a.) The terminal block shown in left graph is

pre-installed on the mounting bracket.

b.) After wiring is completed, gently push wires into

hanger bracket with terminal block facing upward (if

applicable).

2. Make fixture wire connection. Plug the male

connector into female connector and plug the male

terminal into female terminal.(Do not force

it into wrong receptacle as it will cause damage.)

Fixture Wire

F A N C O

161031

F A N C O

161031

Remove the motor screws and washers

from the motor assembly. Secure blade

brackets to the motor with washers and

motor screws.

Attach the canopy to the hanger

bracket, then secure it with four

screws and washers.

Thread the blade screws through the

rubber washer blade bracket and blade

into the decorative cap. Tighten all blade

screws securely. Repeat on other blades.

Fig.10

Blade

Blade Bracket

Blade Screw

Fig.11

Motor Screw

Washer

Blade Bracket

Screw

Hanger Bracket

Washer

Canopy

Fig. 9

Decorative Cap

Rubber Washer

Fig.12

Switch Box

Screw

Switch Box Cover

Install without fan light

Make sure the wires of the fan light in

the switch box are capped.

Secure the switch box cover with

the switch box screws.

To install the fan light, skip this step

and proceed to Fig.13.

Fan Light Installation:

Fig.14

Switch Box

Screw

Secure the fan light onto the switch

box by using the switch box screws.

Switch Box

Fan Light

Female Terminal

Male Terminal

Fig.13

Make wire connection:

-- Connect the blue wire from the switch box to

blue wire from the fan light by inserting male

terminal into female terminal.

-- Connect the red wire from the switch box to

red wire from the fan light by inserting male

terminal into female terminal.

Carefully put the wires into the switch box.

F A N C O

161031

Fig.17

Turn on the electric circuit at the main fuse

or circuit breaker box.

The slide switch on the switch box sets the direction of fan rotation.

Select the desired direction of fan rotation. Push the slide switch

down for " Forward" and up for "Reverse".

Note: Wait for fan to stop before reversing the direction of blade

rotation.

Fig.16-b

Reverse

Forward

Fan Speed Pull

Chain

Fan Light Pull

Chain

Install pull

chains and

drops

Reverse

Forward

Fig.16-a

Slide Switch Switch Box

Slide Switch

Install bulbs (Excluded).

a. Attach the suction cup to the surface of the halogen bulb lens.

b. Insert and twist the bulb (GU10 MR16C BULB ONLY) into the socket by

using the suction cup.

c. Remove the cup from the halogen bulb lens by pulling the knob of the suction

cup.

d. Repeat with other bulbs.

Do not discard the suction cup, it will be needed when replacing the bulb.

Adjust the spotlight head to a desired position by using the swivel.

Caution: Turn off the electric circuit and allow the fixture to cool down

completely before replacing the bulbs.

Bulb GU10 Max.50W

(Excluded)

Suction Cup

Fig.15

Install two pull chains and drops onto the pull chains located in the switch box and light kit.

The pull chain controls the fan speed as follows:

1 pull – High, 2 pulls – Medium, 3 pulls – Low, and 4 pulls – Off.

To turn the light kit “ON” or “OFF”, pull the chain that is attached to the light kit.

Caution: If you install a remote control or a wall control for this fan, pull the pull chains to “high speed” of the

fan motor and “on” of the fan light.

F A N C O

161031

MALFUNCTIONS - TROUBLE SHOOTING

Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a hazard for yourself

and your environment.

Most malfunctions are caused by small errors which you can easily resolve by yourself. Please check the following table

before contacting your retailer. This way, you can spare yourself a lot of effort and cost.

If you can not resolve the malfuntion yourself, please ask your retailer directly. Please note that the warranty will be

voided by inappropriate repairs.

Vaxcel International Co., Ltd.

121 E North Avenue, Carol Stream, IL, USA

www.vaxcel.com

MANUFACTURER

Disposal of the fan: You are required to dispose of electric and electronic appliances separately from your household

waste.Please inquire at your municipality regarding proper ways of disposal.

Be separately disposing of your electric and electronic appliances, ou are participating in recycling and you are helping

to prevent potentially toxic substances from polluting the environment.

Disposal of the packaging: The packaging consists of cardboard and marked plastic and Styrofoam which can be

recycled. Please recycle.

DISPOSAL

Risk of injury: Before cleaning the fan, always switch off the power at the main circuit breaker and wait until the

fan has come to a complete stop.

Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.

CLEANING

Malfunction

Fan does not turn.

Fan vibrates.

Light does not work.

Fan or fan light can not

be controlled using the

remote control.

Switch for fan speed or fan light not

in correct position?

Switch the fan speed to high

and the fan light to on.

Lamp defective? Exchange lamp.

Fan switched off. Switch on.

Check circuit breaker.

Install new batteries.

Install fan thoroughly

according to installation

instructions.

No mains voltage?

Batteries of remote control empty?

Fan not installed properly?

Underlying cause (error) Solution

This manual suits for next models

Other aireRyder Fan manuals

aireRyder

aireRyder FN433 series User manual

aireRyder

aireRyder FN 52180 Instruction manual

aireRyder

aireRyder F0049 User manual

aireRyder

aireRyder Toledo FN11146 User manual

aireRyder

aireRyder Zephyr User manual

aireRyder

aireRyder F0048 Instruction Manual

aireRyder

aireRyder F0029 User manual

aireRyder

aireRyder F0042 User manual

aireRyder

aireRyder F0028 User manual

aireRyder

aireRyder FN73335 User manual

aireRyder

aireRyder F0061 User manual

aireRyder

aireRyder FN52307 User manual

aireRyder

aireRyder FN52317 User manual

aireRyder

aireRyder F0003 User manual

aireRyder

aireRyder FN72238 User manual

aireRyder

aireRyder FN52434 User manual

aireRyder

aireRyder PEPEO-FN51133 User manual

aireRyder

aireRyder FN75539 Technical manual

aireRyder

aireRyder eFan FN4113 Series User manual

aireRyder

aireRyder F0050 User manual

aireRyder

aireRyder FN52239 User manual

aireRyder

aireRyder FN52998 User manual

aireRyder

aireRyder FN44322 User manual

aireRyder

aireRyder FN42251 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

aireRyder Cyrus User manual

Popular Fan manuals by other brands