AIR LAB ACY2WH User manual
Air Purier
(ACY2WH)
User Manual
Content
• Safety
• Safety precaution
• Unit and components
• Getting started
• Product structure
• Buttons
• Air quality information
• ProductSpecications
• Maintenance and cleaning
• Troubleshooting
• After Sales Service
• After Sales Warranty
3-4
5
6-7
8
10-12
13
15
16
17-19
19
20
Air Purier
Safety
BEFORE USING THIS DEVICE, READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN
THIS MANUAL AND ON THE APPLIANCE
• Ensure that the device is fully assembled in line with the instructions before use. Do not dismantle the
device.
• Use ONLY as described in this manual.
• Suitable for dry locations ONLY. Do not use the device outdoors or on wet surfaces and do not expose to
water or rain.
• Do not operate any appliance with a damaged cable or plug.
• If the device is not working as it should, has received a sharp blow, has been dropped, damaged, left
outdoors, or dropped into water, do not use and contact Air Lab Global Limited.
• Do not use any cleaning agents or lubricants on this device. Unplug before cleaning or carrying out any
maintenance.
• Do not stretch the cable or place the cable under strain. Keep cable away from heated surfaces.
• Do not route the cable under furniture or appliances. Do not cover cable with throw rugs, runners or
similar coverings. Arrange cable away from traffic area and where it will not be tripped over.
• This device can be used by children aged from 8 years and above and persons with reduced physical,
sensory or reasoning capabilities, or lack of experience and knowledge, ONLY if they have been given
supervision or instruction by a responsible person concerning use of the device in a safe way and un-
derstand the hazards involved. Cleaning and maintenance should not be performed by children without
supervision.
(ACY2WH)
32
Safety Precautions Unit and components
• Do not carry out any maintenance or repair work other than that shown in this manual, or advised by
Air Lab Global Limited, its service agent or a similarly qualified person in order to avoid a hazard.
• Do not used the device as a toy. Close attention is necessary when used by or near children. Children
should be supervised to ensure that they do not play with the device.
• Do not put any object into the air inlet or the outlet. Do not use with any air inlet or outlet blocked.
• Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.
• Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or
apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the device.
• Always disconnect the plug from the socket before inspecting for problems. If the device will not operate,
first check the mains socket has an electricity supply and that the plug is properly inserted into the socket.
• When removing or replacing the filter, make sure to keep your fingers clear.
5
1. Unit Body
3. Power Adatper
2. Cylinder Air Filter
4. User Manual
4
Air Purier
(ACY2WH)
User Manual
Getting started
Step 1
Unpack the package and take out the device.
Step 2
Flip the device, rotate the bottom cover in an anticlockwise direction to unlock.
Step 3
Take out the lter with packaging, then remove the lter from the packaging.
Step 4
Put back the lter without packaging.
Step 5
Close the bottom cover and rotate clockwise towards the lock direction.
Step 6
Plug in the power adapter line to the device.
Step 7
Plug the power adapter into the socket.
Step 8
Press the on/off key to run the device.
1 2
5 6
7
7
6
3
4
8
Product Structure
Air Outlet
Air Inlet Shell
Control Panel
Supply Hub Foot Pads
Display Screen
PM 2.5 Digital
Display Area
Timer Icon
Check lter
indicator
9
8
Buttons
Press to turn On or Off
Turn on / off the air purier by pressing the On/Off button on the control panel.
Sleep mode
Press to Activate or Deactivate.
Activate sleep mode by pressing sleep button which will turn off the screen display
and the PM2.5 status indicator with ultra-low speed of the fan. Press any button to
deactivate sleep mode.
Airow speed
Press to switch between the different airow speeds.
Available airow speed options are: 1, 2, 3 and 0. Auto mode is set as 0. Adjust the
airow using the buttons on the control panel.
Timer
Press to Activate or Deactivate.
Activate the timer function by pressing the button on the control panel (1 press = 1
hour). The timer starts from 1 – 12 hours, the power will be turned off when the count
down is nished.
Negative ion purication
Child lock
UVC Disinfection light
Press to Activate or Deactivate.
Activate the negative ion purication function by pressing the button on the control
panel.
Press to Activate or Deactivate.
Activate the child lock function by pressing the button on the control panel, the
machine will lock itself causing other buttons cannot be used, until 5 seconds of long
pressing the button to unlock the child lock.
Press to Activate or Deactivate.
Activate the UVC Disinfection light function by pressing the button on the control
panel.
11
10
The air quality level for PM 2.5 particles is indicated using a color scale on the display on top of the device.
PM 2.5 Index Air Quality Fan Speed
10-79
80-299
300-500
Excellent
Moderate
Poor
1
2
3
Excellent
(Green)
Moderate
(Blue)
Poor
(Red)
Check lter indicator
Press and hold the button for 5 seconds to reset the timer.
When the accumulated usage time of the lter reaches 2000 hours, the check lter
indicator will be ashing.
Note: The check lter indicator only indicates the end of a 2000 hours period. As suggested, the average lifespan of
a lter is 2000 hours. However, the lter’s life span could be extended due to low indoor air pollution.
Air quality information
13
12
Product Specications
Product Name
Voltage
Power
Particulate CADR
Max. Area
Product Dimension
Net Weight
Gross Weight
Sensor Type
Max. Noise
Air Purier
DC 24V
40W
355m³/h
20-45m²
Ø270 x 532 mm
4.7kg
6.37kg
PM2.5
≤58dB
Types Specications
15
Maintenance & Cleaning
Cautions:
• Ensure the device is unplugged.
• Do not use detergents or polishes to clean the device.
• Never immerse the device or accessories in water or any
other liquid.
• Use ONLY dry and soft cloth to clean the surface of the device including air inlets and outlets.
• Clean the sensor regularly with cotton buds, to maintain sensor accuracy and ensure the continuing high
performance of the device.
Filter Replacement:
• After 2000 hours usage of the filter, the check filter indicator light will be flashing. Take out the filter and
check its color. If part of the filter turns dark grey or black, the filter should be replaced. If the filter is still
white or light grey in color which means the filter can be used further, press and hold the check filter
indicator button for 5 seconds to reset the filter timer.
• When replacing the filter, please make sure the device is not connected to power, rotate anticlockwise
towards unlock direction and open the bottom cover, take out the filter.
• Removing the packaging from the filter, put it into the device.
• Rotate clockwise to lock the bottom cover and place the device on a stable area after that.
• Insert the adapter into the socket. After the device is powered on, press the power button to turn on the
device. Press and hold the timer button for 5 seconds to reset check filter timer.
Note: The used air lter contains contaminants collected from the air. Do not touch the lter cotton directly or smell the lter.
Trouble Situation Treatment
The device does not work.
Air outlet volume is signi-
cantly weaker than when
purchased.
The air volume at the air out-
lets is signicantly enhanced
compared to when purchased
The air inlet is covered.
The lter is installed incorrectly.
The lter is damaged.
The air inlet has residual dirt.
The lter is covered.
The lter has residual dirt.
Troubleshooting
The power cable is not connected
to the power supply.
Connect the power cable to the
power supply.
Please remove the object covering the
air inlet.
Please clean the surface of air inlet.
Please remove the object covering the
lter.
Please clean the lter. If there is no
obvious improvement, please replace
the lter.
Please install the lter correctly.
Please replace it with a new one.
Please make sure the adapter AC plug
properly connected to the outlet.
Please ensure that the adapter DC plug
is properly connected to the product
host.
The adapter is not connected
properly.
17
16
Table of contents
