AIGURD F22 User manual
F22
AIGURD Fingerprint Smart Door Lock
User Manual
AIGURD
Product Introduction................................................................01
Installation Guide....................................................................04
Operation Introduction.............................................................11
Software..................................................................................17
Routine maintenance..............................................................19
Warranty..................................................................................20
Contact....................................................................................21
Contents
come true.The lockmakes operations based on visual menu
01
Thank you for choosing this fingerprint touchscreen door lock
No more worries about losing keys,you just need one touch to
unlock.This lock adopts a live semiconductor sensor and has
360 degree fingerprint recognition,which allows easy and fast
fingerprint entry
.The lock is equipped with OLED displa
y,it
’s
software allows lock owner to copy and recover the user data
and track the entry record.Double verification features increase
lock security level significantly.Enjoy the latest biomeric
fingerprint technologies that will bring you a convenient and
secure lock system.
Reset
Reset
Dot faces
the Arrow
Left
Key board
Cancel
Oled screen
Mechanical
keyhole
Up/Increase
Down/Reduce
Enter
Fingerprint
Sensor
Micro USB
charging port
Right
1.Features
UP to 200 user IDs could be registered to the lock and both finger
-print and code unlocking ways are available for each ID.
Administrator:who has the highest privilege in the locking system,
can not only unlock but also set up the lock.10 IDs maximum(ID
range:0001-0010).
Normal user:who can only unlock the lock but has no authorization
to set up the lock.140 IDs maximum(ID range:0011-0150).
Guest user:who can only unlock the door within the permitted time
period,50 IDs maximum(ID range:0151-0200).this function is speci-
ally designed for babysitters,hourempolyees,etc
Password protection:Add same quantity of 1-6 digits before and
after the real password,you can still open the lock,highly advanced
anti-peep function
Double ID combination mode to open:user A’s fingerprint+user B’
s fingerprint,user A’s password+user B’s password,user A’s finge
rprint+user B’s password,there must be 2 user IDs involved in the
unlocking process
Open mode:once you activate this function,anyone could open the
door by pushing down the handle without finger or password
verification,convenient for offices’clubs’shops’ working hours
Software Assistant:You can copy lock A’s user data to lock B via
this lock assistant, admins can also check out 10000 entry records
Low power alert:If the battery voltage is below 4.6V,after you open
the lock,a red light will blink and an alarm will ring as well.
2.Specification
Stainless steel 304 for the whole lock body,which is anti-rust
and anti-fading for 10 years
Semiconductor sensor and 360 degree fingerprint recognition
Anti-fake fingerprint technology ＆leaf core opening design,
ensuring a high security level.
Precision copper gear transmission design,ensuring a long
lifetime(600,000 times)
USA Tl code chip,preventing high-frequency pulse unlocking.
Single latch---American standard
Fitting door thickness between 1 1/5” and 2 2/5”(30-60mm)
Operation temperature from -4 F to 140 F
Powered by 4 AA Alkaline batteries(NOT included)
o o
02
Outside Chassis
F22
AIGURD
Note:Please make sure that all accessories are in the package
before installation.
Inside Chassis
Base Mounting Plate
Square Spindle
Mechanical Keys Door Latch USB Cable Strike Plate
Connection Rod Screw M4x12 Screw M4x30 Screw M4x20
Strike Box AIGURD Manual
Drill Holes Template
Screw M3x8
Battery
compartment cover
Inside Chassis
Screw M4x30 Base Mounting Plate
Connection Rod
Outside Chassisl
Screw M4x12
Screw M4x20 latch
Spindle
a.Drill holes according to the paper
guide inside lock package.
b.Insert the lock latch into the door.
c.Install the square iron stick & outside lock housing
d.install the inside lock housing
a.Insert the lock latch into the door and tighten up with 2pcs screws M4x20.
b.Install the strike plate and fix it with 2pcs self-tapping screws.
:The latch should face to the outside deadbolt.
:2 fixed screws in line should be parallel to the door edge.
:The previous strike plate must be removed
Strike Plate
Lock latch
60-70mm
a.Insert the square iron stick across the latch, if the door thickness is less
than 2 , the spring side should face the inside housing.(Note: If the door
thickness is over 2 , the spring side should face the opposite direction.).
b.Tighten up the 3pcs connection rods to the outside housing unit and make
the two arrowheads face each other.
c.Insert the square iron stick smoothly across the latch.Make sure the stick
edge slides into the hole on the outside handle.Get the wire on the handle
across the space.
a.Pass the wire through the rectangular hole on the base mounting plate
and then fix the plate on the door with 3pcs M4x30.
b.Connect the wire to battery.
c.Insert the square iron stick into the inside handle. Please arrange the
wire in empty space and make sure the wire is fixed.
d. Install the inside housing onto the mounting plate and fasten it with
4pcs M4*12 screws
Table of contents
