AGPtek S3 User manual
English
01/11
Deutsch
12/24
Français
25/37
Italiano
38/50
Español
51/63
日本語
64/73
Contents
1
Thank you for purchasing this product. Please read
this user manual carefully before use and keep this
instruction for future reference. If you have any
problem about this product, please feel free to
1. Please charge the product before first use. The
wristband number (Bluetooth name) will be
displayed when you turn on the wristband.
2. This product needs to be connected to mobile
phone through the specified APP (See Download &
Install App Part). Please download and install it
before use. Do not directly connect with mobile
phone via Bluetooth.
3. The function of this product cannot be used for
medical purposes. Please consult your doctor if you
have any medical related problems.
4. Compatible smartphone system: Android 4.3+, iOS
8.0+, Bluetooth 4.0+. Devices with Android 6.0 and
above need to turn on the GPS function to use.
5. Please use 5V USB charger to charge this product.
And keep the metal contacts free of dirt, oxidation
and impurities. If not used for a long time, please
turn off the power and charge it once every month.
Attention
2
It takes 2-3 hours to fully charge the product.
1. Long press the touch button for 3 seconds to turn
on the wristband.
2. Tap the touch button to light up screen, then tap
again to cycle through different menus and functions:
Main Interface, Steps (calories and distance), Heart
Rate, Stopwatch, Sports Mode. (Initial default 3
modes: walking, running, riding. Other sports can be
chosen and sent to the wristband through APP: hike,
climb, dance, yoga, spinning bike, ping-pong,
Charging
Buckled up
Golden Contact Area
Operation Instruction
Push here to
separate
Connect to an USB
port to charge
3
badminton, football, tennis, basketball.)
3. Main interface style selection: Tap the touch
button to light up screen, long press to enter the
selection of main interface. Tap the touch button to
cycle through the style, and long press for 3 seconds
to confirm. The last interface is reset interface. Long
press the touch button for 3 seconds to select
whether to turn off and restore the factory settings.
Tap to select Y or N, long press to confirm.
4. Steps: Tap to switch to step interface to view the
number of steps. Long press to further view the
number of steps and calories, then tap again to view
the distance, long press to exit.
5. Heart rate: Tap to switch to heart rate interface
and it will automatically start detecting heart rate 3
seconds later. After 10 seconds of detection, you can
check your heart rate. Long press to exit (heart rate
monitoring function is extremely power-consuming,
so frequent detection directly affects the battery life
of wristband. The frequency of automatic heart rate
4
detection can be set in APP: 5 minutes, 30 minutes,
2 hours, automatic detection off. The official
recommendation is that turn off automatic detection
or monitor once every 2 hours).
6. Stopwatch: Tap to switch to stopwatch interface.
Long press to start timing, tap to pause, and tap
again to continue, long press to exit.
7. Sports mode: Tap to switch to sports interface.
Long press to start, then short press to select to view
data. Long press to end and save the data (data will
not be saved if time is less than 1 minute).
1. Please wear the wristband on
the wrist, approx. 2cm away from
the ulna. The heart rate sensor is
close to skin and cannot be shaken.
If wear the wristband loosely and the light of sensor
leaks, it will affect the accuracy of heart rate
measurement. Do not directly look at the green light
of sensor, which may cause eye irritation.
2. Screen-on when turning wrist:
The screen of the wristband
will light up automatically when
you raise your wrist at an angle.
How to Wear
5
You can download and install the app
by scanning the QR code or search
“Smart Wristband” in “APP store” on
iPhones or in “Google play” on Android
phones.
Keep wristband close to phone, then turn on the
phone’s Bluetooth according to the APP connection
wizard. Add and connect the wristband in the device
interface of the App. The Bluetooth name of the
wristband is “Smart Watch + wristband number”,
then set your personal information and complete the
connection. Please do not directly search and
connect the wristband in the phone's Settings -
Bluetooth. Otherwise, it will make the wristband
unusable.
1. iOS System: You need to
finish the Bluetooth pairing
request once connect App
successfully for the first
time. Then the wristband can
receive notifications from iOS system such as
incoming calls, messages, QQ, Wechat and so on.
Otherwise, it is unable to receive notifications.
2. Android System: Android system needs to set App
Download & Install APP
Binding Wristband to APP
6
background running permissions in the mobile
manager. Allow the self-starting, high power
consumption, white list and other options.
Otherwise, the app will be cleared by the system,
which will disconnect the wristband from the app
(important notes). Receiving notifications needs to
open the message notification permission according
to the prompt, and only select the smart wristband
app to receive notifications. Only one App can be
selected for the message notification permission.
1. Home Interface
The display position of modules can
be changed by long-pressing and
dragging. You can drag the icon of
steps, exercise calorie consumption,
sleep, heart rate, weight or others
As the main display content.
When the wristband is connected to
App Function
7
the app for the first time, click the home interface
and the app will automatically synchronize the time,
date and history of the wristband.
2. Exercise Interface
Need to turn on phone's GPS and
network, then select sport mode
to start. After starting, the wristband
starts recording by default. The App
will synchronize the heart rate
data of wristband, and record the
motion track.
2.1.Jumping Rope
2.2.Jumping Jack
2.3.Sit-up
2.4.Treadmill
Note:
1).When the multi-exercise mode is on, the
wristband will display the corresponding exercise
icon. You can exit the multi-exercise mode by using
the App or long pressing the touch button of
wristband.
2).Click the icon in the upper right corner to view the
sports history.
3. Device Interface
Device information: Display device name, firmware
version, MAC address.
3.1.Call notification: Supports the call notification
8
from contacts from the address book
of your phone by default, not the call
notification from the address book of
third party. If the contact is not saved,
the wristband just displays numbers.
The function can be turned on or off
by switch.
3.2.Message notification: When enter
the App in Android device, it will
prompt to enable the access
notification permission. Follow the
prompts to only select the Smart
Wristband APP in the message notification
permission. And turn on the app's message switch to
receive messages.
Message notification viewing supports QQ, WeChat,
Facebook Messenger, Twitter, LINE, Skype,
WhatsApp, KakaoTalk, Instagram, Snapchat, etc.
Long press for 3 seconds to exit the messages
browsing. The wristband receives the message
delivered from the mobile phone notification bar. If
the mobile phone notification bar does not send
message, the wristband may not receive message.
3.3.Alarm settings: Allow to set 4 alarms for
different periods, and set alarm on/off, snooze time,
Table of contents
Languages:
Other AGPtek Fitness Tracker manuals
