Agilent Technologies InfinityLab LC Series User manual

Agilent InfinityLab LC Series

1260 Infinity II Binary Pump

User Manual

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual

Notices

Document Information

Document No: SD-29000214 Rev. C

Edition: 10/2021

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con-

sent from Agilent Technologies, Inc. as

governed by United States and interna-

tional copyright laws.

Warranty

The material contained in this document

is provided “as is,” and is subject to being

changed, without notice, in future edi-

tions. Further, to the maximum extent

permitted by applicable law, Agilent dis-

claims all warranties, either express or

implied, with regard to this manual and

any information contained herein, includ-

ing but not limited to the implied warran-

ties of merchantability and fitness for a

particular purpose. Agilent shall not be lia-

ble for errors or for incidental or conse-

quential damages in connection with the

furnishing, use, or performance of this

document or of any information con-

tained herein. Should Agilent and the user

have a separate written agreement with

warranty terms covering the material in

this document that conflict with these

terms, the warranty terms in the separate

agreement shall control.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only

those rights customarily provided to end

user customers. Agilent provides this

customary commercial license in Soft-

ware and technical data pursuant to FAR

12.211 (Technical Data) and 12.212

(Computer Software) and, for the Depart-

ment of Defense, DFARS 252.227-7015

(Technical Data - Commercial Items) and

DFARS 227.7202-3 (Rights in Commer-

cial Computer Software or Computer

Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in damage to the product or loss

of important data. Do not proceed

beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn, Germany

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 3

In This Guide...

This manual covers the Agilent InfinityLab LC Series 1260 Infinity II Binary Pump

(G7112B).

1Introduction

This chapter gives an introduction to the module and an instrument overview.

2 Site Requirements and Specifications

This chapter provides information about site requirements and specifications for

the binary pump.

3UsingthePump

This chapter explains the operational parameters of the Binary Pump.

4 Optimizing Performance

This chapter gives information on how to optimize the performance of the Binary

Pump under special operational conditions.

5Troubleshootingand Diagnostics

Overview of the troubleshooting and diagnostic features.

6 Error Information

This chapter describes the meaning of error messages, and provides information

on probable causes and suggested actions how to recover from error conditions.

7 Test Functions and Calibration

This chapter explains all test functions that are available for the binary pump.

8 Maintenance

This chapter describes the maintenance of the module.

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 4

9 Parts and Materials for Maintenance

This chapter lists all parts and tools that are required for maintenance and simple

repairs.

10 Identifying Cables

This chapter provides information on cables used with the Agilent InfinityLab LC

Series modules.

11 Hardware Information

This chapter provides detailed technical information about your binary pump.

12 LAN Configuration

This chapter provides information on connecting the module to the Agilent

ChemStation PC.

13 Appendix

This chapter provides addition information on safety, legal and web.

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 5

Contents

1Introduction10

Instrument and Operation 11

Overview of the Hydraulic Path 15

Leak and Waste Handling 20

2 Site Requirements and Specifications 25

Site Requirements 26

Physical Specifications 29

Performance Specifications 30

3UsingthePump32

Magnets 33

Turn on/off 34

Status Indicators 36

Best Practices 37

Leak and Waste Handling 39

Hints for Successful Use of the Binary Pump 40

Setting up the Pump with the G4208A Instant Pilot 41

Setting up the Pump with the Instrument Control Interface 42

Solvent Information 47

Algae Growth in HPLC Systems 54

Prevent Blocking of Solvent Filters 55

Normal Phase Applications 57

4 Optimizing Performance 59

When to Use a Vacuum Degasser 60

When to Use the Active Seal Wash Option 61

When to Use the Low Volume Mixer 62

When to Remove Damper and Mixer 63

How to Optimize the Compressibility Compensation Setting 65

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 6

5 Troubleshooting and Diagnostics 68

Overview of the Module’s Indicators and Test Functions 69

User Interfaces 71

Agilent Lab Advisor Software 72

6 Error Information 73

What Are Error Messages 74

General Error Messages 75

Module Error Messages 81

7 Test Functions and Calibration 92

(System) Pressure Test 93

Valve Test 98

Binary Pump Solvent Compressibility Calibration 100

Pump Elasticity Calibration 102

Pump Leak Rate Test 104

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 7

8 Maintenance 108

Introduction to Maintenance 109

Cautions and Warnings 110

Cleaning the Module 112

Overview of Maintenance and Simple Repairs 113

Maintenance Procedures 114

Remove and Install Doors 115

Exchange the Purge Valve Frit or the Purge Valve 117

Replace the O-Ring on the Purge Valve 120

Remove the Pump Head Assembly 122

Maintenance of a Pump Head without Seal Wash 124

Maintenance of a Pump Head with Seal Wash 127

Reinstall the Pump Head Assembly 131

Seal Wear-in Procedure 133

Exchange the Active Inlet Valve (AIV) or its Cartridge 134

Exchange the Seal Wash Cartridge 137

Replace Leak Handling System Parts 139

Exchange the Outlet Valve 141

Installation of the Solvent Selection Valve Upgrade Kit 143

Exchange the Solvent Selection Valve 145

Replacing Module Firmware 148

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 8

9 Parts and Materials for Maintenance 149

Hydraulic Path with Solvent Selection Valve 150

Hydraulic Path without Solvent Selection Valve 152

Pump Head Assembly Without Seal Wash 154

Pump Head Assembly with Seal Wash Option 156

Outlet Valve 158

Purge Valve Assembly 159

Active Inlet Valve Assembly 160

HPLC System Tool Kit 161

Active Seal Wash Option 162

Solvent Cabinet 163

Bottle Head Assembly 164

Accessory Kit 165

Cover Parts 166

10 Identifying Cables 167

Cable Overview 168

Analog Cables 170

Remote Cables 172

CAN/LAN Cables 176

RS-232 Cable Kit 177

Agilent 1200 Module to Printer 178

11 Hardware Information 179

Firmware Description 180

Electrical Connections 183

Interfaces 185

Setting the 6-bit Configuration Switch 193

Early Maintenance Feedback 197

Instrument Layout 198

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 9

12 LAN Configuration 199

What You Have to Do First 200

TCP/IP parameter configuration 201

Configuration Switches 202

Initialization Mode Selection 203

Dynamic Host Configuration Protocol (DHCP) 205

Manual Configuration 208

13 Appendix 212

General Safety Information 213

Waste Electrical and Electronic Equipment (WEEE) Directive 219

Radio Interference 220

Sound Emission 221

Agilent Technologies on the Internet 222

InfinityLab LC Series 1260 Infinity II Binary Pump User Manual 10

1Introduction

Instrument and Operation 11

Introduction to the Pump 11

Principle of Operation 12

Product Description 14

Features 14

Overview of the Hydraulic Path 15

Leak and Waste Handling 20

Leak Sensor 23

Waste Concept 24

This chapter gives an introduction to the module and an instrument overview.

Other manuals for InfinityLab LC Series

This manual suits for next models

Table of contents

Other Agilent Technologies Water Pump manuals

Agilent Technologies

Agilent Technologies PHV K Series Manual

Agilent Technologies

Agilent Technologies TwisTorr 404 FS User manual

Agilent Technologies

Agilent Technologies 1290 infinity User manual

Agilent Technologies

Agilent Technologies 9130037 User manual

Agilent Technologies

Agilent Technologies HS-2 User manual

Agilent Technologies

Agilent Technologies IDP-15 User manual

Agilent Technologies

Agilent Technologies 1290 Infinity II User manual

Agilent Technologies

Agilent Technologies Turbo-V 903 User manual

Agilent Technologies

Agilent Technologies Turbo-V 3K-G User manual

Agilent Technologies

Agilent Technologies TV 401 NSF User manual

Agilent Technologies

Agilent Technologies TV-401/301 MS User manual

Agilent Technologies

Agilent Technologies VacIon Plus 20 User manual

Agilent Technologies

Agilent Technologies TV-401/301/21 NSF User manual

Agilent Technologies

Agilent Technologies R1330-529 HS-16 Configuration guide

Agilent Technologies

Agilent Technologies 1260 Infinity II User manual

Agilent Technologies

Agilent Technologies Navigator TV 551 SEM User manual

Agilent Technologies

Agilent Technologies RV Series User manual

Agilent Technologies

Agilent Technologies VHS-10 User manual

Agilent Technologies

Agilent Technologies DS40M User manual

Agilent Technologies

Agilent Technologies IDP-7 User manual

Agilent Technologies

Agilent Technologies MS 120 Major Installation and operating manual

Agilent Technologies

Agilent Technologies 1290 infinity User manual

Agilent Technologies

Agilent Technologies TriScroll 600 Series User manual

Agilent Technologies

Agilent Technologies X3500-64000 User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual