Agilent Technologies G8610 Series Reference guide

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

Manual Number G8610-90000, Rev. C

November 2017

Start Up (Manual Section 1.3.4)

Installation: Do not install or use the pump in an environment exposed

to atmospheric agents (rain, snow, ice), dust, aggressive gases, or in

explosive environments or those with a high fire risk. During operation,

the following environmental conditions must be respected:

•Temperature: from +12 °C to + 45 °C

•Relative humidity: up to 90% (non-condensing)

Plug in power cord, flip switch ON behind unit.

Wait about 7 minutes for "SYSTEM READY."

First time startup will

prompt a wizard to help

select language, units,

date, time, and options.

These may be changed

any time through the

menu screens.

Calibration Set Up (Manual Section 4.1)

•Read Internal Leak -Quick check to see if instrument reads

calibrated leak correctly

•To Calibrate:

1. Select Internal Leak and Full.

2. Tap Calibrate.

3. Tap OK when calibration is complete.

Menu Navigation (Manual Section 1.5)

Calibration

Calibrate with

Internal/External

Leak

External leak to be placed on Test Port or vacuum system.

Internal leak is provided instrument.

Calibrate

Full/Fast

Full Spectrometer Calibration/

Fast Gain Adjustment

Test

Configuration

Set Points

Set Point: Leak Rate, Pressure, Audio

Advanced

Features

High Pressure Test, Fine Test Only,

Auto-Zero < 0, Gross Test, Transfer Points (to Test),

Stabilization Wait Time

Application

Setup

Sniff Method, Spray Method,

High Sensitivity, Auto Sequencer,

Split Flow, PPM Sniff Method

Settings

Main Settings

Date and Time, Units, Languages, Touch, and Sound

Screen Settings

Bar Graph, Range, Analog Output

Remote Control

Remote Setup with Channel Sync

Password and

Restrictions

Restriction Level, Lock Vent Control, Lock All Control

Maintenance

General

Internal Calibrated Leak Setup, Software Update

Manual Tuning

Emission, Ion, Gain Settings

Valve Control

Manually Open and Close Valves

Pump

Inspect Forepump and Exhaust Pump

Gauge

Calibration

Calibrate Thermocouple Gauge to Vacuum or Atmosphere

System Defaults

Set to Factory Defaults

System

Information

System

Information

Software Version, Internal Data

Current Setup

Set Points and Calibration Type

Turn Off

Turbo will brake. Do NOT move leak detector while turbo is

powering down.

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

You must consult operations manual, p/n G8610-90001, provided with

the leak detector, in order to operate the equipment in a safe manner.

Main Controls (Manual Section 1.5)

•Test -Measure helium leak rate

•Hold -Isolate leak detector from connected vacuum system while keeping both under vacuum

•Zero -Nullify current leak rate reading and establish a new baseline

•Vent -Bring test port to atmospheric pressure

Home Screen Display (Manual Section 1.5 and 3.11)

Application Setup (Manual Section 5.1.3)

Shutdown (Manual Section 1.3.5)

Tap the Power icon and follow the prompts.

Other manuals for G8610 Series

This manual suits for next models

Other Agilent Technologies Security Sensor manuals

Agilent Technologies

Agilent Technologies G6600-90006 User manual

Agilent Technologies

Agilent Technologies G8610 Series User manual

Agilent Technologies

Agilent Technologies InfinityLab LC Series User manual

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies 85037A Service manual

Agilent Technologies

Agilent Technologies G1315B User manual

Agilent Technologies

Agilent Technologies VS Series User manual

Agilent Technologies

Agilent Technologies 1200 series User manual

Agilent Technologies

Agilent Technologies CrossLab CS User manual

Agilent Technologies

Agilent Technologies VS Series User manual

Agilent Technologies

Agilent Technologies NPD User manual

Agilent Technologies

Agilent Technologies VS C15 Series Guide

Agilent Technologies

Agilent Technologies 1260 Infinity II User manual

Agilent Technologies

Agilent Technologies PHD-4 User manual

Agilent Technologies

Agilent Technologies G3485A User manual

Agilent Technologies

Agilent Technologies G1563A User manual

Agilent Technologies

Agilent Technologies G2621-64000 User manual

Agilent Technologies

Agilent Technologies 1260 Infinity User manual

Agilent Technologies

Agilent Technologies G1314B User manual

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies 1200 Infinity Series User manual

Agilent Technologies

Agilent Technologies VS Series User manual

Agilent Technologies

Agilent Technologies 1200 Infinity Series User manual

Agilent Technologies

Agilent Technologies 5973N Manual

Popular Security Sensor manuals by other brands

THORLABS

THORLABS PDA10JT user guide

Waeco

Waeco UV-DETECT operating manual

Intermatic

Intermatic IOS-DSIMF manual

urmet domus

urmet domus 1083 manual

Siemens

Siemens AZL66 Series manual

BTI

BTI Profiline Multi Finder operating instructions

Challenger

Challenger SL01 instruction manual

DMP Electronics

DMP Electronics 1122INT installation guide

Rielta

Rielta Ladoga MK-RK installation guide

Mirion Technologies

Mirion Technologies ACCURAD PRD user manual

Bosch

Bosch DS835 installation instructions

DBI SALA

DBI SALA EZ Stop User instruction manual

Lamptime

Lamptime ST05C instructions

Ubiquiti

Ubiquiti MFI-MSC quick start guide

Subsite

Subsite 910R Support

Satel

Satel OPAL Pro manual

Aleph

Aleph XC-1XTEU manual

Pima

Pima LARIS QUAD installation instructions