Agilent Technologies 5975 Series Manual

Agilent Technologies

5975 Series

Mass Selective

Detectors

Hardware Installation

2Hardware Installation

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

G3170-90002

Edition

First edition, June 2005

Printed in USA

Agilent Technologies, Inc.

5301 Stevens Creek Boulevard

Santa Clara, CA 95052

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Acknowledgements

Microsoft® and Windows® are U.S. regis-

tered trademarks of Microsoft Corporation.

Hardware Installation 3

Contents

1 General Information

Introduction 8

Important Safety Warnings 10

Many internal parts of the MSD carry dangerous voltages 10

Electrostatic discharge is a threat to MSD electronics 10

Many parts are dangerously hot 11

Hydrogen 11

Safety and Regulatory Certifications 13

Information 13

Symbols 14

Electromagnetic compatibility 15

Sound emission declaration for Germany 15

Cleaning 16

Recycling the Product 16

Customer Responsibilities 17

Before You Start 18

Other Documentation 19

This section provides information on how to identify specifically what type of

MSD you are working with as well as how to properly clean and dispose of the

instrument. Also included in this section are the “Important Safety Warnings”

which list critical safety precautions for all users.

8Hardware Installation

1General Information

Introduction

This document provides installation instructions for the Agilent Technologies

5975 Series Mass Selective Detector (MSD). Installation must be performed by

an Agilent Technologies service representative.

The Agilent Technologies 5975 Series Mass Selective Detectors (MSDs) are

turbo pump MSDs.

The 5975 Series MSD system consists of:

•5975 Series MSD

•Optional G3397A High Vacuum Gauge controller (required for CI operation)

•Gas Chromatograph

6890 Series GC, with options for MSD use

7683 Automatic Liquid Sampler (optional)

•Computer and MSD ChemStation software

Refer to your MSD ChemStation documentation for additional information

Table 1 lists possible configurations for the 5975 Series MSD. Figure 1

identifies many of the common parts.

General Information 1

Hardware Installation 9

Table 1 Possible configurations

G3171A G3172A G3174A

High vacuum pump Standard turbo

pump

Performance turbo

pump

Performance turbo

pump

CI No No PCI/NCI

G3397A High vacuum gauge

controller

Recommended Recommended Required

DIP compatible (3rd party) Yes Ye s Yes

Figure 1 5975 Series MSD system

6890 Series

Gas Chromatograph

5975 Series

MSD

Automatic Liquid

Sampler (ALS)

injector

5975 Series MSD LCP

View window

10 Hardware Installation

1General Information

Important Safety Warnings

Before moving on, there are several important safety notices that you should

always keep in mind when using the 5975 Series MSD.

Many internal parts of the MSD carry dangerous voltages

If the MSD is connected to a power source, even if the power switch is off,

potentially dangerous voltages exist on the wiring between the MSD power

cord and the AC power supply, the AC power supply itself, and the wiring from

the AC power supply to the power switch.

With the power switch on, potentially dangerous voltages also exist on:

•All electronics boards in the instrument.

•The internal wires and cables connected to these boards.

•The wires for any heater (oven, detector, inlet, or valve box).

Electrostatic discharge is a threat to MSD electronics

The printed circuit (PC) boards in the MSD can be damaged by electrostatic

discharge. Do not touch any of the boards unless it is absolutely necessary. If

you must handle them, wear a grounded wrist strap and take other antistatic

precautions. Wear a grounded wrist strap any time you must remove the MSD

right side cover.

WARNING All these parts are shielded by covers. With the covers in place, it should be difficult

to accidentally make contact with dangerous voltages. Unless specifically

instructed to, never remove a cover unless the detector, inlet, or oven are turned off.

WARNING If the power cord insulation is frayed or worn, the cord must be replaced. Contact

your Agilent service representative.

Other manuals for 5975 Series

Table of contents

Other Agilent Technologies Security Sensor manuals

Agilent Technologies

Agilent Technologies 85037A Service manual

Agilent Technologies

Agilent Technologies G1314B VWD User manual

Agilent Technologies

Agilent Technologies PHD-4 User manual

Agilent Technologies

Agilent Technologies InfinityLab 1290 Infinity II User manual

Agilent Technologies

Agilent Technologies 85025A Manual

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies 5973N Operating instructions

Agilent Technologies

Agilent Technologies 7250 User manual

Agilent Technologies

Agilent Technologies 1200 Infinity Series User manual

Agilent Technologies

Agilent Technologies InfinityLab LC Series User manual

Agilent Technologies

Agilent Technologies 1260 Infinity User manual

Agilent Technologies

Agilent Technologies G3437A User manual

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies 1200 series User manual

Agilent Technologies

Agilent Technologies 1260 Infinity User manual

Agilent Technologies

Agilent Technologies VS Series User manual

Agilent Technologies

Agilent Technologies VS Series User manual

Agilent Technologies

Agilent Technologies G2334A User manual

Agilent Technologies

Agilent Technologies G1315B User manual

Agilent Technologies

Agilent Technologies G6600-90006 User manual

Agilent Technologies

Agilent Technologies CrossLab CS User manual

Agilent Technologies

Agilent Technologies G3388B Installation manual

Agilent Technologies

Agilent Technologies 1200 Infinity Series User manual

Popular Security Sensor manuals by other brands

THORLABS

THORLABS PDA10JT user guide

Waeco

Waeco UV-DETECT operating manual

Intermatic

Intermatic IOS-DSIMF manual

urmet domus

urmet domus 1083 manual

Siemens

Siemens AZL66 Series manual

BTI

BTI Profiline Multi Finder operating instructions

Challenger

Challenger SL01 instruction manual

DMP Electronics

DMP Electronics 1122INT installation guide

Rielta

Rielta Ladoga MK-RK installation guide

Mirion Technologies

Mirion Technologies ACCURAD PRD user manual

Bosch

Bosch DS835 installation instructions

DBI SALA

DBI SALA EZ Stop User instruction manual

Lamptime

Lamptime ST05C instructions

Ubiquiti

Ubiquiti MFI-MSC quick start guide

Subsite

Subsite 910R Support

Satel

Satel OPAL Pro manual

Aleph

Aleph XC-1XTEU manual

Pima

Pima LARIS QUAD installation instructions