Agilent Technologies IDP3GBKIT User manual

Table of contents

Other Agilent Technologies Laboratory Equipment manuals

Agilent Technologies

Agilent Technologies 7200 User manual

Agilent Technologies

Agilent Technologies 1260 Infinity User manual

Agilent Technologies

Agilent Technologies 2200 TapeStation User manual

Agilent Technologies

Agilent Technologies G4560A User manual

Agilent Technologies

Agilent Technologies Cryogenic User manual

Agilent Technologies

Agilent Technologies 490 Micro GC User manual

Agilent Technologies

Agilent Technologies G1978B User manual

Agilent Technologies

Agilent Technologies Varian 325-MS LC/MS User manual

Agilent Technologies

Agilent Technologies G2916A User manual

Agilent Technologies

Agilent Technologies 7890A User manual

Agilent Technologies

Agilent Technologies Cary 3500 User manual

Agilent Technologies

Agilent Technologies 5975T LTM GC/MSD Operating manual

Agilent Technologies

Agilent Technologies 7820A User manual

Agilent Technologies

Agilent Technologies TS-8900 Operating instructions

Agilent Technologies

Agilent Technologies 7890 Series Operating instructions

Agilent Technologies

Agilent Technologies G2747A User manual

Agilent Technologies

Agilent Technologies HS-16 User manual

Agilent Technologies

Agilent Technologies 6890 Series User manual

Agilent Technologies

Agilent Technologies 8860 User manual

Agilent Technologies

Agilent Technologies 53150A User manual

Agilent Technologies

Agilent Technologies InfinityLab LC Series User manual

Agilent Technologies

Agilent Technologies varian 320-MS LC/MS User manual

Agilent Technologies

Agilent Technologies G1960-60470 User manual

Agilent Technologies

Agilent Technologies G1992A User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide

Yamato

Yamato BM510 instruction manual

Quick Reference Guide

TPS-compact Gas Ballast

The TPS-compact packaging includes a standard gas ballast kit (P/N IDP3GBKIT) that can be used to prevent water and

other condensates from accumulating within the foreline pump. The standard configuration has a seal screw installed in the

1/4-20 thread in the top of the exhaust manifold. This configuration can be used for dry applications.

When appreciable amounts of water, solvents, etc., are being pumped, remove the seal screw and replace it with the provided

adapter and 1/8" NPT sintered filter plug.

WARNING

Before install gas ballast adapter remove the power supply cable.

1. Disconnect the TPS-compact from electrical power.

2. Unlock the scroll pump support by unscrewing the screws.

3. Lift the TPS-compact in order to access the Scroll pump site.

Quick Reference Guide

4. Unscrew seal screw and install provided gas ballast adapter and 1/8’’ NPT.

5. Lock the scroll pump support by screwing the screws.

Be careful during pump support closing to prevent damage to system components (vacuum pipes and

connectors).

NOTE

1. During the operation of the gas ballast feature the noise may increase.

2. There is not a predefined amount of time to let the gas ballast open: it depends on the amount of

moisture trapped in the system.

Do not exceed 2.8 Nm of torque when installing the adapter into the manifold.

For more details about gas ballast refer to the manuals of the single TPS-compact components.

Use the provided adapter and 1/8" NPT sintered filter plug in order to avoid dust entrance.

The gas ballast must be sealed whenever pumping any gas not intended to be vented to

atmosphere.

Contacts:

U.S. and Canada (toll free):

+1 800 882 7426

vpl-[email protected]

Europe & other countries (toll free):

+00 800 234 234 00

vpt-[email protected]

China (toll free):

400 8206778 (mobile)

800 8206778 (landline)

vpd-support-[email protected]

Visit the product web page: www.agilent.com/chem/tpscompact

This information is subject to change without notice.

© Agilent Technologies, Inc. 2022

Printed in Italy, January 14th, 2022

X3582-90000-9-PUI rev. A.00

CAUTION

CAUTION

CAUTION

CAUTION