Afx light 6CUBE-FX User manual

©Copyright LOTRONIC 2016 6CUBE-FX Page 1

Ref.: 6CUBE-FX (15-1877)

USER

MANUAL

MANUEL D’UTILISATION

BEDIENUNGSANLEITUNG

HANDLEIDING

IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or

your dealer about the way to proceed.

NOTE IMPORTANTE : Les produits électriques ne doivent pas être mis au rebut avec les ordures ménagères. Veuillez les faire recycler là où il existe

des centres pour cela. Consultez les autorités locales ou votre revendeur sur la façon de les recycler.

WICHTIGER HINWEIS: Elektrogeräte gehören nicht in den Hausmüll. Sie müssen in speziellen Betrieben recycelt werden. Bringen Sie sie zu einer

speziellen Entsorgungsstelle für Elektrokleingeräte (Wertstoffhof)!

BELANGRIJK: De elektrische producten mogen niet naast het huisvuil geplaatst worden. Gelieve deze te laten recycleren daar waar er centra’s hiervoor voorzien

is. Raadpleeg de plaatselijke autoriteiten of uw verkoper ivm de manier van recycleren.

©Copyright LOTRONIC 2016 6CUBE-FX Page 2

BEFORE YOU BEGIN

Contents of the carton:

•1 x 6CUBE-FX light effect

•1x Mains lead

•1x DMX connection lead

•1x quick lock handle

•1x safety rope

•1x User Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are

present and have been received in good condition. Notify the freight company immediately and retain packing

material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of

mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it

is important that the fixture be returned in the original factory box and packing.

Safety Instructions

Please read these instructions carefully, they include important information about the installation, usage and

maintenance of this product.

• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives

this instruction booklet.

• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is

not higher than that stated on the decal or rear panel of the fixture.

• This product is intended for indoor use only!

It is essential that the device is earthed. A qualified person must carry out the electric connection.

• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable

materials close to the unit while operating.

• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be

sure that no ventilation slots are blocked.

• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size

and type.

• Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying

handles.

• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.

• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by

yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest

authorized technical assistance center. Always use the same type of spare parts.

• Don’t connect the device to a dimmer pack.

• Make sure the power cord is never crimped or damaged.

• Never disconnect the power cord by pulling or tugging on the cord.

• Avoid direct eye exposure to the light source while it is on.

DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

©Copyright LOTRONIC 2016 6CUBE-FX Page 3

Features

●LED average lifetime over 50000 hours, low power consumption

●Control mode: master/slave, auto, DMX, sound

● Electronic strobe 1~25Hz

●Electronic dimming: 0%~100%

●10 built-in programs for auto display or controlled by DMX controller

●Program editing via DMX controller and front display, and save the programs in CPU of the fixture.

Specifications

Power supply ..................................................................................................100-240Vac 50/60Hz

Consumption................................................................................................................... 83W max.

Fuse ................................................................................................................ 2A/250V Ø5 x 20mm

DMX channels ....................................................................................................... 14 / 16 channels

Light source................................ 6 x 10W CREE LED RGBW 4-in-1+ 12x 4pcs 3-in-1 RGB SMD LED

Tilt .............................................................................................................. 200° + endless rotation

Pan............................................................................................................................................ 630°

Beam angle................................................................................................................................... 9°

Spot angle .................................................................................................................................. 18°

Dimensions....................................................................................................... 362 x 265 x 171mm

Weight .....................................................................................................................................4.3kg

RIGGING

Screw the supplied handle on the bottom of the unit. Pull the safety rope through the holes on the bottom of the

base and over the trussing system or other safe fixation spot.

Handling bracket

Safety rope

Rapid locking hook

©Copyright LOTRONIC 2016 6CUBE-FX Page 4

LCD Display

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run

synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of

channels required by all fixtures on a serial data link determines the number of fixtures that the data link can

support.

Important: Fixtures on a serial/data link must be daisy chained in one single line. Maximum recommended serial

data link distance: 100 meters (1640 ft.) Maximum recommended number of fixtures on a serial data link: 32 fixtures

CABLE CONNECTORS

Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

DMX connector configuration

Termination reduces signal errors. To avoid signal transmission problems and interference, it is always advisable to

connect a DMX signal terminator.

CAUTION

Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a

ground loop, and your fixture may perform erratically. Test cables with an ohm meter to check correct polarity and

to make sure the pins are not grounded or shorted to the shield or each other.

Setting up a DMX Serial Data Link

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the controller.

2. Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input

connector of the next fixture consisting of a (male) 3 pin connector.

3. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

DMX address setting

Each fixture must have a specific starting address. When receiving signal transmission, every fixture will receive

channels control signals for its own starting address.

INPUT

COMMON

DMX +

DMX-

Resistance 120 ohm

1/ 4w between pin 2

(DMX-) and pin 3

(DMX+) of the last

fixture.

：

2：UP

3：DOWN

4：ENTER

5：Display

1. DMX in

2. DMX Out

3. Fuse

4. Power In

5. Power Out

©Copyright LOTRONIC 2016 6CUBE-FX Page 5

The user can set several fixtures to the same address or set up a separate address for every device.

If more than one fixture is set to the same address, all of them receive the same DMX channels signals. All connected

fixtures are jointly controlled; the controller can't control a device separately.

If every device is set to a different address, it will receive different DMX signals corresponding to its starting address.

This device has 16 channels, so the first device starting address is set 1, second is 17(1+16), third is 33(17+16) and so

on.

LED Digit display operation

Main menu

Sub-menu

Function

Description

Addr 000-512 Address setting

Chnd

14Ch

Channel 14

16Ch Channel 16

Shnd

Sh1

Scene mode 1

Sh2 Scene mode 2

Sh3

Scene mode 3

SLnd Mast Master mode

SL1

Slave mode

Lost

Hold Keep mode

Soun

Sound mode

Auto Auto mode

Blac

Black mode

Sens S000~S099 Sound sensitivity

Angl

630

Pan 630 degree

540 Pan 540 degree

Pint

yes

Pan reverse Yes

No Pan reverse No

Tint

Yes

Tilt reverse Yes

No Tilt reverse No

Manu

Pan

Pan Manual test 000-255

Til Tilt Manual test 000~255

Til2

Tilt2 Manual test 000~255

Address 33

Address 17

Address 01

©Copyright LOTRONIC 2016 6CUBE-FX Page 6

Red Red Manual test 000~255

Gren

Green Manual test 000~255

Blue Blue Manual test 000-255

Whit

White Manual test 000-255

Stro Strobe Manual test 000-255

Dim

Dimmer Manual test 000-255

led Led Manual test 000-255

Led

LED black out on

off LED black out off

disp

Display reverse on

off Display reverse off

Test

Whole Function Test

Fhrs Operate Time

Ver

Software Version

Rest Whole Reset

defa

Default

MENU operation

This fixture has 4 buttons on the front panel to access, edit and set all functions.

[MENU]: press MENU key to enter into the submenus. Press MENU again to leave the sub-menu. If no key is ressed

during 30 seconds, the unit will go back to MENU display automatically.

[Up]: press UP key to increase the displayed values. Keep pressed to increase the values quickly.

[Down]：press DOWN key to decrease the displayed values. Keep pressed to decrease the values quickly.

[ENTER]：in normal status, this button has no function. In edit mode, press ENTER to enter into the sub-menu.

Function setting

1) DMX address setting

1. Press <MENU>

2. Press <UP/DOWN> to choose, then pres <ENTER> to enter [Addr]

3. Press <Up/Down> to choose address 001~XXX

4. Press <ENTER> to confirm, or press "MENU" to exit

2) Channel Setting

1. Press <MENU> to enter EDIT interface

2. Press <UP/DOWN> to choose [Chnd], press ENTER

3. Press UP/DOWN to choose the channel mode ‘14CH’ or ‘16CH’

4. Press ENTER to confirm, or press "MENU" to exit

3) Scene mode (before this setting, press MENU, select < Lost>, select <Soun> or <Auto>and save. The unit must be

set to Sound/Auto Mode first)

1. Press <MENU> to enter EDIT interface

2. Press< UP/DOWN> to choose [Shnd] and press ENTER

3. Press< UP/DOWN> to choose Sh1, Sh2, Sh3 (can choose any scene mode to operate)

4. Press <Enter> to confirm, or press "MENU" to exit.

4) Master-slave setting

1. Press <MENU> to enter EDIT interface

©Copyright LOTRONIC 2016 6CUBE-FX Page 7

2. Press <UP/DOWN> to choose [SLnd], press ENTER

3. Press <UP/DOWN> to choose Mast/SL1.

4. Press <Enter> to confirm, or press "MENU" to exit.

5) DMX Lost Setting

1. Press< MENU> to enter EDIT interface

2. Press <UP/DOWN >to choose [Lost], press ENTER

3. Press< UP/DOWN> can choose the operating mode: hold, soun, Auto, blac (you

can choose any scene mode to operate)

4. Press <Enter> to confirm, or press "MENU" to exit.

）

Sound sensitivity Setting (before this setting, press MENU, select < Lost>, select <Soun> and save. You must be in

Sound Mode first, before you can select the sensitivity)

1. Press MENU

2. Press UP/DOWN to choose [Sens], press ENTER

3. Press <Up/Down>, <Enter> to adjust the sound sensitivity from 0%-99%.

4. Press <Enter> to confirm, or press "MENU" to exit.

8) Pan angle setting

1. Press<MENU>.

2. Press UP/DOWN to choose [Angl], press ENTER

3 Press<Up/Down> to choose ‘630’ or ‘540’

4. Press <Enter> to confirm, or press "MENU" to exit.

9) Pan reverse setting

1. Press<MENU>.

2. Press UP/DOWN to choose [Pint], press ENTER

3 Press<Up/Down> to choose ‘YES’ or ‘NO’

4. Press <Enter> to confirm, or press "MENU" to exit.

10) Tilt reverse setting

1. Press<MENU>

2. Press UP/DOWN to choose [Tint], press ENTER

3 Press<Up/Down> to choose ‘YES’ or ‘NO’

4. Press <Enter> to confirm, or press "MENU" to exit.

11) Manual test

1. Press MENU

2. Press UP/DOWN to choose [Manu], press ENTER

3. Press <Up/Down>, to choose [PAN], [TIL], [TIL2], [Red], [Gren], [Blue], [Whit], [Stro], [Dim], [LED]

[PAN]：(1)Press <Enter> to select [PAN]

(2) Press <Up/Down> to choose ‘000~255’

(3) Press <Enter> to confirm, or press "MENU" to exit.

[TILT]：(1)Press<Enter> to select [TIL]

(2) Press<Up/Down> to choose ‘000~255’

(3) Press <Enter> to confirm, or press "MENU" to exit.

[TILT2]: (1)Press<Enter> to select [TIL2]

(2) Press<Up/Down> to choose ‘000~255’

(3) Press <Enter> to confirm, or press "MENU" to exit.

[Red]：(1)Press <Enter> to select [Red]

(2) Press <Up/Down> to choose ‘000~255’

(3) Press <Enter> to confirm, or press "MENU" to exit.

[Green]: (1) Press <Enter> to select [Gren]

(2) Press <Up/Down>, Choose ‘000~255’

©Copyright LOTRONIC 2016 6CUBE-FX Page 8

(3) Press <Enter> to confirm, or press "MENU" to exit.

[Blue]：(1)Press <Enter> to select [Blue]

(2)Press<Up/Down> choose ‘000~255’

(3)Press <Enter> to confirm, or press "MENU" to exit.

[White]：(1)Press <Enter> to select [Whit]

(2) Press <Up/Down> choose ‘000~255’

(3) Press <Enter> to confirm, or press "MENU" to exit.

[Strobe]：(1)Press <Enter> to select [Stro]

(2)Press<Up/Down> choose ‘000~255’

(3)Press <Enter> to confirm, or press "MENU" to exit.

[Dimmer]：(1)Press <Enter> to select [Dim]

(2)Press<Up/Down> choose ‘000~255’

(3)Press <Enter> to confirm, or press "MENU" to exit.

[LED]：(1)Press <Enter> to select [led]

(2)Press<Up/Down> choose ‘000~255’

(3)Press <Enter> to confirm, or press "MENU" to exit.

12) LED setting

1. Press MENU.

2. Press UP/DOWN to choose [LED], press ENTER

3. Press<Up/Down> to choose ‘ON’ or ‘OFF’

4. Press <Enter> to confirm, or press "MENU" to exit.

13) Display reverse setting

1. Press MENU.

2 .Press UP/DOWN to choose [Disp], press ENTER

3. Press<Up/Down> to choose ‘ON’ or ‘OFF’

4. Press <Enter> to confirm, or press "MENU" to exit.

14) Whole test

1. Press < ENTER>

2. Press < UP/DOWN> to select [Test], then press < ENTER> to do the whole test

3. Press <Enter> to confirm, or press "MENU" to exit.

15) Operating time

1. Press < ENTER>

2. Press < UP/DOWN> to select [Fhrs], then press < ENTER> to check the light’s working time

3. Press <Enter> to confirm, or press "MENU" to exit.

16) Software Version

1. Press < ENTER>

2. Press < UP/DOWN> to select [Ver], then press < ENTER>to check the light’s version information

3. Press <Enter> to confirm, or press "MENU" to exit.

17) Whole reset

1. Press< MENU>

2. Press UP/DOWN to choose [Rest], then press ENTER

3. After reset, it will go back to the MENU display

18) Restore factory settings

1. Press MENU.

2. Press UP/DOWN to choose [Defa], then press ENTER

3. Press<Enter> to confirm, or press "MENU" to exit.

©Copyright LOTRONIC 2016 6CUBE-FX Page 9

Description of the Channels

14 Channels operation

Channel Value Function

CH1 Pan 000-255 Pan 0-630°

CH2 Tilt 000-255 Tilt 0-200°

CH3 Infinite tilt

000-030 Stop

031-140 clockwise,from fast to slow

141-145 Stop

146-255 Counter-Clockwise from slow to fast

CH4 Speed 000-255 Pan/Tilt Speed from fast to slow

CH5 Red 000-255 Red (0-100%)

CH6 Green 000-255 Green (0-100%)

CH7 Blue 000-255 Blue (0-100%)

CH8 White 000-255 White (0-100%)

CH9 Strobe

000-015 No Function (open)

016-095

Strobe (1HZ-25Hz Slow-Fast)

096-175

Strobe (1Hz Fast-Slow)

176-255

Random Strobe (Slow-Fast)

CH10

Dimmer

000-255

Master Dimmer 0-100%

CH11 LED strip program

000-036

No Function

037-056

Red

057-077

Green

078-098

Blue

099-119

R&G

120-140

R&B

141-161

G&B

162-176

R&G&B

177-186

RGB Change

187-196

Red-Chase

197-206

Green-Chase

207-216

Blue-Chase

217-226

R&G-Chase

227-236

R&B-Chase

237-246

G&B-Chase

247-255

R&G&B-Chase

CH12

LED Strip Speed

000-255

Speed from slow to fast

CH13 Color Macro

000-045

No Function

046-065

Red

066-085

Green

086-105

Blue

©Copyright LOTRONIC 2016 6CUBE-FX Page 10

106-125

White

126-145

R&G

146-165

R&B

166-185

G&B

186-205

R&G&B&W

206-255

RGB Change Fast-Slow

CH14 Function

000-049 No Function

050-069

Auto 1

070-089

Auto 2

090-109

Auto 3

110-119

Sound (5s after start sound mode)

120-249

No Function

250-255

Whole Reset

16 Channel operation

Channel Value Function

CH1

PAN

000-255

Pan 0-630°

CH2

Pan Fine

000-255

Pan fine

CH3

Tilt

000-255

Tilt 0-200°

CH4

Tilt Fine

000-255

Tilt fine

CH5 Infinite tilt

000-030

Stop

031-140

clockwise,from fast to slow

141-145

Stop

146-255

Counter-Clockwise from slow to fast

CH6

Speed

000-225

Pan/Tilt Speed from fast to slow

CH7

Red

000-255

Red (0-100%)

CH8

Green

000-255

Green (0-100%)

CH9

Blue

000-255

Blue (0-100%)

CH10

White

000-255

White (0-100%)

CH11 Strobe

000-015

No Function (open)

016-096

Strobe (1Hz-25Hz Slow-Fas)

097-176

Strobe (1Hz Slow-Fast)

177-255

Random Strobe (Slow-Fast)

CH12

Dimmer

000-255

Master Dimmer 0-100%

CH13 LED strip program

000-036

No Function

037-056

Red

057-077

Green

078-098

Blue

099-119

R&G

120-140

R&B

141-161

G&B

162-176

R&G&B

177-186

RGB Change

This manual suits for next models

Table of contents

Languages:

Other afx light Light Fixture manuals

afx light

afx light BAR LED 412 User manual

afx light

afx light WASH760-FC User manual

afx light

afx light COMET-GOBO User manual

afx light

afx light SPOT-240LED-FC User manual

afx light

afx light 9BEAM-FX User manual

afx light

afx light PARLED100-Z User manual

afx light

afx light HYBRID-470LED-FC User manual

afx light

afx light HYBRID-360LED-FC User manual

afx light

afx light SPOT180LED User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification

afx light 6CUBE-FX User manual

Popular Light Fixture manuals by other brands