Aerpro FP9450BK Guide
Scan QR code
for the install information
VE
DUAL ZONE
INSTALL KIT
USER/INSTALLATION
MANUAL
FP9450BK
Example of factory fitted dual zone stereo
Product overview
The Aerpro FP9450BK VE Facia Installation Kit is Australian designed and
engineered and has been made for fitting a double DIN aftermarket radio, CD or
DVD player to the original double DIN enclosure. It suits VE series 1 dual climate
models with full digital climate control. Compatible models for this kit are select SS
variants and select HSV’s.
1
Inclusions
1x ABS Plastic facia
1x H-VAC controller with built in steering
wheel control module
1x Universal SWC lead
1x Antenna adapter
1x Mounting kit
*NOTE*
The FP9450BK is designed to fit vehicles with an open compartment.
Vehicles with a ‘LID’ compartment will need to replace with either:
Aerpro WC62 (Wireless Charging) or
Aerpro WC62P (Panel Only)
2
1x ABS Plastic facia
1x H-VAC controller with built in steering
wheel control module
1x Universal SWC lead
1x Antenna adapter
1x Mounting kit
Product structure
Screen display
1. Front/Rear demister air button
2. Left rotary dial button (Rotate,Tap,Hold)
3. Right rotary dial button (Rotate,Tap,Hold)
4. Fan speed UP
5. Recirculated air on/off button
6. LCD display information screen
7. Fan speed DOWN
8. USB charging and sync port
12 3 4
5687
Rear Demister Front Demister
Fan Speed
Number/Temp
Outside Temp
Air conditioner
SZ/DZ Indicators
Recirculation air
3
5. Recirculated air on/off button
6. LCD display information screen
7. Fan speed DOWN
8. USB charging and sync port
Functions
Turning air-conditioning ON/OFF
Once powered up, press and hold the right rotary dial button to turn the
air-conditioner on. The LCD screen illuminates and air-conditioner icon
(Snowflake) illuminates. Press and hold again to turn off. When turning on the
air-conditioner the system will remember previous user settings.
Press
& Hold
A
U
T
O
A
U
T
O
A
U
T
O
4
Positioning
To select different air positions in the vehicle tap the RIGHT rotary button. Positions
are for the Head/Feet, Chest, Chest/Feet and Feet (See icons below).
Tap
5
Functions
Recirculation/Air Passthrough button
Tap this button to cycle between Recirculation and Air Passthrough. The
corresponding icon will illuminate.
Tap
A
U
T
O
A
U
T
O
6
Functions
Front/Rear demister button
When air-conditioner is turned on tap this button to active Rear Demister or hold
this button to activate the Front Demister.
Tap
TAP HOLD
Re-Calibrating your HVAC System
In the case that you may need to
re-calibrate you heater valves or ducting
positions. For exampe, your vents do
not pass air through the correct vents or
hot/cold does not feel correct.
Tap and hold the Front Demister
button for 5seconds or more until you
hear the actuators in the car begin to
re-calibrate.
Hold
5secs
A
U
T
O
A
U
T
O
*NOTE*
Turning on Front Demister will
automatically turn on A/C
7
Fan speed
To adjust the fan speed tap on either of the two right buttons.
Top to increase fan speed and Bottom to lower fan speed.
Air-conditioner temperature
Turn the right rotary dial to the left or right to lower and raise the air-conditioner
temperature. This is a numeric value from 15 (lowest) to 29 (highest).
A
U
T
O
A
U
T
O
Rotate
Functions
8
Functions
Automatic climate control
To activate auto climate mode, tap the left hand rotary dial and then set the target
temperature by rotating the right hand rotary dial to the desired level. The fans
speed, the vent temperature and the air flow direction is fully automatic and will
adjust itself based on what it needs to get to the required level.
Tap
A
U
T
O
Rotate
The temperature can be set between
16 and 29 when in Climate Mode.
*NOTE*
When the temperature is set to 16 or
29. The AUTO symbol will turn off.
This indicates the system will be
running full COLD or full HOT
Functions
Automatic climate control continued
When in Auto mode (SZ or DZ), the system is equipped with 3 levels of fan speeds.
Fan LOW, Fan MID and Fan HIGH
A
U
T
O
A
U
T
O
A
U
T
O
Fan LOW Fan MID
Fan HIGH To adjust the levels use Fan Up
and Fan Down
*NOTE*
If you change the Vents while in Auto Climate, the vents will change, however the
fan will remain on AUTO (AUTO Symbol will turn off).
If you change the Air speed above FAN HIGH or FAN LOW while in Auto Climate,
the system will revert back to manual fan mode, however, the Vents will remain on
AUTO (AUTO Symbol will turn off)
9
Table of contents
Other Aerpro Automobile Accessories manuals
Aerpro
Aerpro Connects 2 CHFO6C User manual
Aerpro
Aerpro ABT510B User manual
Aerpro
Aerpro Connects 2 CHFO7C User manual
Aerpro
Aerpro FP9750 Guide
Aerpro
Aerpro Connects 2 FP8225 User manual
Aerpro
Aerpro MagMate User manual
Aerpro
Aerpro Connects 2 User manual
Aerpro
Aerpro FP9450GK User manual
Aerpro
Aerpro VE 2 Series Instruction Manual
Aerpro
Aerpro FP8435 User manual
