AEG Automatic Refrigerator Guide

Waschautomaten

Automatic Washing Machines

Lave-linge

Lavatrici

Wasautomaat

Lavadoras

Aufstell- und Anschlußanweisung

für Waschautomaten mit gewölbter Blende

Installation and connection instructions

for automatic washing machines with

vaulted front cover

Installation et raccordements

des lave-linge à bandeau bombé

Instruzioni di installazione e collegamento

per lavatrici con pannello rigonfiato

Opstellings- en aansluitvoorschrift

voor wasautomaten met gewelfd voorpaneel

Instrucciones para la instalación y la conexión

de lavadoras con panel curvado

Contents

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Appliance Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front and Side Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appliance Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Appliance Transit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Removing Transit Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Installation-Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Levelling the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Self Adjusting Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Inlet Hose Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

AEG Service Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

nte

on env

ronment-

y paper.

AEG –putting words into action.

1Important Safety Information

The safety of AEG appliances is in accordance with recognised techno-

logical standards and appliance safety legislation. We nevertheless feel

that it is important to acquaint you with the following safety guide-

lines.

•This appliance is heavy, care should be taken when moving it.

•When moving, do not tip the washing machine onto it’s front or left

hand side (viewed from the front). This is to prevent the possibility of

electrical components becoming wet.

•Before installation inspect the machine for transport damage. Do not

connect the appliance if it is damaged –contact your retailer.

•Ensure all packaging and transit bolts/bar have been removed, see

„Removing of Transit Packaging“. Failure to remove packaging and

transit bolt/bar may cause serious damage to the product or property.

•Any plumbing work required to install this appliance should be

carried out by a qualified plumber or competent person.

•Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

•Check the electricity supply is the same as that indicated on the

rating plate of the appliance.

•Should the appliance mains cable need to be adapted for any reason

this should only be carried out by a qualified/competent person.

•In the case of a permanent connection it is necessary that you install

a double pole switch between the appliance and the electricity supply

(mains), with a minimum gap of 3 mm between the switch contacts

and of a type suitable for the required load in compliance with the

electrical regulations.

•The switch must not break the yellow and green earth cable at any

point.

•Care must be taken to ensure that the appliance does not stand on

the electrical supply cable.

•The installation should comply with local water authority and

building regulations requirements.

•Appliances designed for cold water connection must not be

connected to hot water.

Appliance Dimensions

Front and Side Views

Rear View

Appliances with cold water connection only

598

575

592

950

100

850 +10

-5

10 +10

-5

Appliances with hot and cold water connections

Appliance Installation

3The appliance worktop must not be removed to gain a height reduction

when installing under a kitchen worktop.

Appliance Transit

•To prevent electrical components becoming wet when moving the

appliance, do not tip the washing machine onto it’s front or the left

hand side (viewed from the front).

•Do not transport the appliance without the transit packaging/bolts/

bar in place. Transporting the appliance without the transport

packaging/bolts/bar in place may cause damage to the product.

•Never lift the appliance by the door.

•The appliance is heavy, care must be taken when moving it.

Hot water inlet

Cold water inlet

Appliance Installation

Removing Transit Packaging

•Ensure all transit packaging is removed prior to installation.

•Retain transit packaging for future use.

3The appliance is supplied with a spanner (H) and plastic caps (E) (2 pcs.)

and (G) (1 pc).

0Remove the hose holder (A).

0Remove the 2 screws (B) with the spanner supplied (H).

0Remove the 4 screws (C).

0Remove the transit bar (D).

0Cover the holes left by screws (B) the 2 plastic caps (E).

0Replace the 4 screws (C), for safe keeping.

0Remove the screw and compression spring (F) with the spanner (H),

cover the hole with plastic cap (G).

Important: When fitting the plastic caps, press until they snap into the

rear panel securely.

Appliance Installation

Installation-Site Preparation

•The installation surface must be clean, dry and level.

•Do not install on deep pile carpet.

•If the appliance ist installed next to heat source (e. g. cooking

appliance), a heat insulating pad (85 x 57 cm) must be placed

between the washing machine and the heat source.

•Do not install the appliance in locations where the temperature may

fall below freezing.

•Please ensure that when the appliance is installed it is easily

accessible for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To

help prevent vibration we recommend you place a waterproof wood

panel, at least 15 mm thick under the appliance, secured to at least 2

floor beams with screws. If possible install the appliance in one of the

corners of the room, where the floor is more stable.

Levelling the Appliance

•The appliance must be levelled using the adjustable feet.

•Adjust the feet using the spanner provided.

•Ensure the spanner is securely pushed onto the hex head on the feet

of the appliance.

•Adjust the feet so that the appliance is level. The appliance must not

rock when weight is applied.

•Check the appliance level using a spirit level.

•Never use strips or shims of wood or cardboard etc to compensate for

any uneveness in the floor. Always use the adjustable feet.

Self Adjusting Foot

Appliances with a spin speed of 1400 r. p. m. and over have a self

adjusting foot fitted (rear right).

•If the appliance vibrates or is unstable during a spin cycle of

1400 r. p. m.: Set the three adjustable feet to length of 10 mm.

•If the self adjusting foot (rear right) does not reach the floor:

Manually extend the self adjusting foot to the required length.

Electrical Connection

Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

1WARNING - THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should these safety

measures not be observed.

Before switching on, make sure the electricity supply voltage is the

same as that indicated on the appliance rating plate. The rating plate is

located at the top of the rim of the open door.

The appliance is supplied with a 13amp plug fitted. In the event of

having to change the fuse in the plug supplied, a 13amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be

replaced for any reason. The

wires in the mains lead are

coloured in accordance with

the following code:

Green and Yellow : Earth

Blue : Neutral

Brown : Live

Blue

Green

& Yellow

Brown

Cord Clamp

Electrical Connection

•The wire coloured green and yellow must be connected to the

terminal marked with the letter “E“or by the earth symbol or

coloured green and yellow.

•The wire coloured blue must be connected to the terminal “N“or

coloured black.

•The wire coloured brown must be connected to the terminal marked

“L“or coloured red.

•Upon completion there must be not cut, or stray strands of wire

present and the cord clamp must be secure over the outer sheath.

1WARNING: A cut off plug inserted into a 13 amp socket is a serious

safety (shock) hazard. Ensure that the cut off plug is disposed of

safely.

Permanent connection

In the case of a permanent connection it is necessary that you install a

double pole switch between the appliance and the electricity supply

(mains), with a minimum gap of 3 mm between the switch contacts

and of a type suitable for the required load in compliance with the

current electrical regulations.

The switch must not break the yellow and green earth cable at any

point.

;This appliance is in accordance with the following EU Guidelines:

–Low Voltage Guidelines 73/23 EEC dated 19 February 1973, include

Guideline Change Notice 93/68 EEC

–EMC Guideline 89/336 EEC dated 3 May 1989, including Guideline

Change Notice 92/31 EEC.

This appliance complies with the requirements laid out in the EEC

Directive 76/899.

Voltage 240 V AC Fuse rating 13 amps

See rating plate for further information.

This appliance meets VDE requirements.

Particular regulations of local electricity authorities must be observed.

This appliance conforms to EEC Directive No. 82/499/EWG on radio

interference.

1WARNING: Repairs to electrical appliances may only be performed by

trained personnel. Improper repairs may lead to serious risks for the

user.

Water Connection

3The washing machine is provided with safety devices preventing back-

contamination of the water supply and complies with local water

authority requirements.

This appliance is designed to be permanently plumbed into your home’s

water supply.

Before connecting up the machine to new pipework or to pipework

that has not been used for some time, run off a reasonable amount of

water to flush out any debris that may have collected in the pipes.

Water Pressure

The appliance is designed to operate within the following water

pressure limits:

–minimum 1 bar (14.5 p. s. i.)

–maximum 10 bar (145 p. s. i.)

IMPORTANT

•At more than 10 bar (145 p. s. i.): Install pressure-reducing valve.

•At less than 1 bar (14.5 p. s. i.): Unscrew the inlet hose from the

appliance at the inlet solenoid valve and remove the flow regulator

(to do this, remove the sieve with needle-nose pliers and remove

rubber washer behind the sieve). Replace sieve. Retain the washer for

future use.

Inlet Hose Connection

The inlet hose provided is 1.2 or 1.3 metres depending on the model. If

a longer inlet hose is required contact your AEG Service Force Centre.

Under no circumstances should hoses be connected together to provide

a longer length.

The rubber washers are either set into the inlet hose threaded

connection or supplied separately in the installation kit. These washers

must be fitted to ensure water tight seals. Do not use any other washer.

Other manuals for Automatic Refrigerator

This manual suits for next models

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual