Advent LCD4WM User manual

Model: LCD4WM

3.5” Window Mounted

LCD Monitor

User Manual

Features

3.5” High Resolution TFT LCD Monitor

Low Profile, Slim Design

Fully Adjustable reversing guidelines

Built in Speaker

Two video inputs

Fully Adjustable

Auto brightness adjustment

DC12V –DC24V

Warnings

The product is intended to assist in safe driving and to allow the driver to

have a broader rear view while the vehicle is in reverse. You, as the

driver, are solely responsible for the safe operation of your vehicle and

the safety of your passengers according to local traffic regulations. Do not

use any features of this system to the extent it distracts you from safe

driving. Your first priority while driving should always be the safe

operation of your vehicle. Audiovox Electronics Corporation cannot

accept any responsibility whatsoever for accidents resulting from failure

to observe these precautions or safety instructions.

1. This product utilizes high voltage. Any unauthorized modifications or

damage to the product may result in electrical shock. Handle all

components with care. Inspect regularly for damage to components

and cabling.

2. You are responsible for ensuring that the installation of this product

does not void or affect the vehicle manufacturer’s warranty.

Audiovox Electronics Corporation or its subsidiaries are not liable in

full or in part for improper installation resulting in loss or damage to

your property, or for voiding all or part of the vehicle manufacturer’s

warranty.

3. Do not apply excessive force to any of the components contained

within this kit. Excessive force used before, during or after

installation that results in a damaged or non-functional part will void

all warranties.

4. Please follow the procedures in this installation manual. Improper

installation or modification of this product will void all warranties.

Product Description

This advanced high resolution monitor will show a clear picture from a

reversing camera or any other video source.

The modern thin design with built in speakers are more is more advanced

than competitive products.

The LCD is perfect for use on your car, truck, or van.

This wired Monitor is designed for use with an Advent camera but is

compatible with most video sources and other cameras and can be

connected using a standard RCA connector.

Using the System

The LCD4WM is installed in conjunction with an Advent reverse safety

camera.

The LCD4WM will automatically turn on when the vehicle is placed in

Reverse. You can activate the monitor at any time by pressing the power

button located on the underside of the monitor.

Press the MENU button on the front of the screen to activate the menu of

settings. Cycle through the different setting by continuing to press the

MENU button. Use the UP and DOWN buttons to change settings.

Adjusting Settings

All adjustments are made in the MENU.

After three seconds of inactivity the menu will be hidden.

Four titles will show on screen:

MENU - Pressing the menu button will scroll through the submenu items

such as VOLUME, BRIGHTNESS, AUTO BRIGHTNESS,

CONTRAST, HUE, SATURATION, MIRROR, RESET, LANGUAGE,

GUIDELINE (G1, G2, G3, OFF), GUIDELINE ADJUSTMENT.

UP - In the opening menu, the UP button increases the speaker volume.

When scrolling through the submenu the UP button will increase the

value of the submenu (eg Brightness).

DOWN - In the opening menu, the DOWN button reduces the speaker

volume. When scrolling through the submenu the DOWN button will

reduce the value of the submenu (eg Brightness).

CAM SEL/POWER - This button cycles between the different video

images. It can be used to manually turn the monitor on. Once on you can

cycle between the 2 camera inputs. Holding the button down for 3

seconds will turn the monitor off. By default the monitor will

automatically go to the camera input last viewed.

NOTE:

The GUIDELINE setting offers 3 different sized guidelines to be

overlayed on the camera image when reversing. Suitable for Small

vehicles, passenger vehicles and Pickup/SUVs. The guidelines can be

moved Left & right to compensate for off center camera placement using

the GUIDELINE ADJUSTMENT.

Troubleshooting

Symptom

Solution

No power to the monitor

1. Check that reverse power is

attached to orange wire.

2. Check that accessory power is

attached to red wire

3. Check that black is attached to

vehicle body (ground)

4. Check fuse and if blown

ONLY replace is fuse of same

amperage.

No image from backup camera

when vehicle placed in reverse

1. Check that camera is

functioning correctly

2. Check that orange wire is

attached to reverse power.

3. Check that backup camera is

attached to input CAM1.

Image is mirrored or requires

adjustment

1. All settings are adjusted by

pressing on the bottom right

corner of the screen (*Touch)

and following prompts.

Sound can not be heard from

Advent camera

1. Increase volume through touch

menu.

Other manuals for LCD4WM

Table of contents

Advent LCD4WM User manual

Popular Car Video System manuals by other brands