Advantech PCA-6175 User manual
PCA-6175
Pentium®II processor-based
PCI/ISA-bus CPU card
ii
Copyright Notice
This document is copyrighted, 1998, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from
its use.
Acknowledgements
AWARD is a trademark of AWARD Software, Inc.
AMD is a trademark of Advanced Micro Devices, Inc.
IBM and PC are trademarks of International Business Machines
Corporation.
Intel is a trademark of Intel Corporation.
MS-DOS is a trademark of Microsoft Corporation.
SMC is a trademark of Standard Microsystems Corporation.
NCR is a trademark of NCR Corporation.
All other product names or trademarks are the properties of their
respective owners.
Part No. 2006617530
3rd Edition Printed in Taiwan December 1998
iii
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the
installation and operation of any of our products.
iv
Product Warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you
will be billed according to the cost of replacement materials, service
time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, type of PC, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and list
any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
material authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
v
Initial inspection
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCA-6175 Pentium®II single board computer
• 1 Pentium II CPU and cooling fan (optional)
• 1 PCA-6175 user's manual
• 1 bus master & BIOS utility driver
• 2 disks, for OBS Win95 drivers
• 1 FDD cable
• 2 EIDE HDD cables
• 1 printer cable
• 1 temperature sensor cable
• 1 ivory cable for keyboard and mouse
• 1 ATX-to-PS/2 power cable
• 1 Pentium II CPU retention module
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
We have carefully inspected the PCA-6175 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the PCA-6175, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or
your local sales representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for inspection by the
carrier. After inspection, we will make arrangements to repair or
replace the unit.
vi
Contents
Chapter 1 Hardware Configuration .............................. 1
1.1 Introduction........................................................................2
1.2 Features...............................................................................3
1.3 Specifications ......................................................................4
System..................................................................................4
Memory................................................................................4
Input/Output .........................................................................4
Industrial features ................................................................5
Mechanical and environmental specifications.....................5
1.4 Board Layout: Main Features ..........................................6
1.5 Jumpers and Connectors...................................................7
1.6 Board Layout: Jumper Locations ....................................9
1.7 Board Layout: Connector Locations..............................10
1.8 Safety Precautions............................................................11
1.9 Jumper Settings................................................................12
1.9.1 How to set jumpers ...................................................12
1.9.2 CPU core frequency (J5)...........................................12
1.9.3 CMOS clear (J6) .......................................................13
1.9.4 Watchdog timer output (J8) ......................................13
1.9.5 CPU bus clock select (J11) .......................................14
1.9.6 DiskOnChip®2000 Flash disk address select (J12) ..15
1.10 System Memory................................................................16
1.11 Memory Installation Procedures ....................................18
1.12 Cache Memory .................................................................19
1.13 Mounting the CPU and Cooling Modules......................20
1.14 On-board Support Bracket .............................................22
vii
Chapter 2 Connecting Peripherals ............................ 23
2.1 Primary (CN6) and Secondary (CN7) IDE
Connectors ........................................................................24
2.2 Floppy Drive Connector (CN13).....................................24
2.3 Parallel Port Connector (CN8) .......................................25
2.4 Keyboard & PS/2 Mouse Connector (CN12).................25
2.5 Serial Ports (CN9: COM1; CN10: COM2)....................26
2.6 Front Panel Connectors (CN2, CN3, CN4, J1 and J2) .27
2.6.1 Keyboard lock and power on LED (CN2) ................27
2.6.2 External speaker (CN3).............................................27
2.6.3 IDE LED (CN4) ........................................................27
2.6.4 ATX soft power switch (J1)......................................27
2.6.5 Reset (J2) ..................................................................27
2.7 ATX Power Control Connectors (J7 and J1) ................28
2.7.1 ATX feature connector (J7) and soft power switch
connector (J1)............................................................28
2.7.2 Controlling the soft power switch.............................29
2.8 USB Connector (CN11) ...................................................29
2.9 IR Connector (CN1).........................................................30
2.10 External Keyboard Connector (J10)..............................30
2.11 External Suspend Switch Lead (SMI) (J3) ....................30
viii
Chapter 3 Award BIOS Setup ..................................... 31
3.1 Introduction......................................................................32
3.2 Entering Setup..................................................................32
3.3 Standard CMOS Setup....................................................33
3.4 BIOS Features Setup .......................................................34
3.4.1 Virus Warning...........................................................34
3.4.2 Quick Power On Self Test ........................................35
3.4.3 Quick Booting ...........................................................35
3.4.4 Boot Sequence...........................................................35
3.4.5 Boot Up Floppy Seek ................................................36
3.4.6 Boot Up NumLock Status .........................................36
3.4.7 Boot Up System Speed .............................................36
3.4.8 IDE HDD Block Mode .............................................36
3.4.9 Gate A20 Option .......................................................36
3.4.10 Typematic Rate Setting...........................................37
3.4.11 Typematic Rate (Chars/Sec) ...................................37
3.4.12 Typematic Delay (msec) .........................................37
3.4.13 Security Option .......................................................37
3.4.14 OS Select for DRAM > 64 MB...............................37
3.4.15 Video BIOS Shadow ...............................................38
3.4.16 C8000-CBFFF Shadow / DC000-DFFFF Shadow .38
3.5 CHIPSET Features Setup ...............................................39
3.6 Power Management Setup ..............................................40
3.6.1 Power Management ..................................................40
3.6.2 HDD Power Management.........................................40
3.6.3 IRQ Activity..............................................................41
3.7 PCI Configuration Setup.................................................41
3.7.1 Load BIOS Defaults..................................................41
3.7.2 Load Setup Defaults..................................................41
3.8 Integrated Peripherals.....................................................42
3.9 Password Setting ..............................................................43
3.10 IDE HDD Auto Detection ................................................43
3.11 Save & Exit Setup ............................................................44
3.12 Exit Without Saving.........................................................44
ix
Chapter 4 On-board Security Setup .......................... 45
4.1 Introduction......................................................................46
4.2 Installation of OBS Devices.............................................46
4.3 Driver Installation............................................................47
4.3.1 Necessary prerequisites.............................................47
4.3.2 Before you begin.......................................................47
4.3.3 Windows 95 drivers setup procedure........................48
Appendix A Programming the Watchdog Timer....... 59
Programming the Watchdog Timer .........................................60
Appendix B Pin Assignments .................................... 63
B.1 COM1/COM2 RS-232 Serial Port (CN9,CN10)...........64
B.2 Keyboard and Mouse Connnector (CN12) ....................64
B.3 External Keyboard Connector (J10)..............................64
B.4 ATX Feature Connector (J7) ..........................................65
B.5 IDE Hard Drive Connector (CN6, CN7)........................65
B.6 USB Connector (CN11) ...................................................66
B.7 CPU Fan Power Connector (CN5) .................................66
B.8 Floppy Drive Connector (CN13).....................................67
B.9 Parallel Port Connector (CN8) .......................................68
B.10 IR Connector (CN1).........................................................69
B.11 HDD LED Connector (CN4) ...........................................69
B.12 Power LED and Keylock Connector (CN2)...................69
B.13 External Speaker (CN3) ..................................................70
B.14 System I/O Ports ..............................................................71
B.15 DMA Channel Assignments ............................................72
B.16 Interrupt Assignments.....................................................72
B.17 1st MB Memory Map.......................................................73
Appendix C DOC®2000 Installation Guide................ 75
C.1 DiskOnChip®2000 Quick Installation Guide................76
C.1.1 DiskOnChip®2000 installation instructions ............76
C.1.2 Additional information and assistance .....................77
x
Table of contents
Other Advantech Single Board Computer manuals
Advantech
Advantech PCA-6277 Installation and operation manual
Advantech
Advantech PCE-5127 Installation and operation manual
Advantech
Advantech PCM-9342 Installation and operation manual
Advantech
Advantech ROM-5620 User manual
Advantech
Advantech PCA-6028 Installation and operation manual
Advantech
Advantech PCA-6005 User manual
Advantech
Advantech SOM-5992 Guide
Advantech
Advantech PCA-6012 Installation and operation manual
Advantech
Advantech PCM-4823/L Installation and operation manual
Advantech
Advantech PCA-6145B User manual
Advantech
Advantech PCM-9389 Installation and operation manual
Advantech
Advantech MIO-5373 Installation and operation manual
Advantech
Advantech RSB-3730 User manual
Advantech
Advantech PCM-9591 Installation and operation manual
Advantech
Advantech SOM-3569 User manual
Advantech
Advantech ASMB-784 Installation and operation manual
Advantech
Advantech ASMB-923I Installation and operation manual
Advantech
Advantech PCM-4822 User manual
Advantech
Advantech PCM-9371 User manual
Advantech
Advantech PCM-9363 Installation and operation manual
